Pyle PLPTS4 User guide

Brand: Pyle

Model: PLPTS4

Category: Notebook arms & stands

Type: User guide

This manual is also suitable for

PLPTS2

PLPTS 2/3/4 (Version 1)

Pro DJ Laptop Tripod Adjustable Stand For

Notebook Computers

http://www.pyleaudio.com

Thanks for purchasing the PLPTS, a professional DJ laptop stand great for mixing it

up at gig.

Specifications:

 Portable Laptop/Notebook Desk/Workstation

 Easily Adjustable Height

 Stand For Musicians, DJ-Based Performances

 Black High Gloss Finish

 Steel Frame Construction

Your kit includes one (1) set of the following items:

1 x tripod base

1 x laptop surface

1 x support plate

4 x screws (in bag)

4 x washers (in bag)

Note: your stand may include different parts. If

so, please check Version 2 of this manual on

www.PyleAudio.com.

1. Start by flipping over the laptop surface.

You should see a set of four holes.

2. Lay the support plate on top, making sure

to line up the holes on the plate to the holes

on the laptop surface.

3. Insert a washer into each of the four screw

hole beds, and then screw in each screw.

4. Next, we need to setup the tripod stand.

There are two knobs. Loosen knob (a) to raise

the height of the stand. Loosen knob (b) to

open up the tripod base. Tighten these knobs

when you have found the appropriate setting.

5. To attach the laptop surface to the tripod

stand, unscrew the knob on the support plate,

place on the tripod stand, and then tighten

the knob. You’re done!

1
2

Pyle PLPTS4 User guide

Brand: Pyle

Model: PLPTS4

Category: Notebook arms & stands

Type: User guide

This manual is also suitable for

PLPTS2

Related papers

Other documents