2. OTC
  3. 6024
6024

OTC 6024 User manual

  • Hello! I am an AI chatbot trained to assist you with the OTC 6024 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of OTC 6024?
    How do I use the OTC 6024?
    What is the top dead center and why is it important?
    What vehicles is the OTC 6024 compatible with?
    What is the Ford equivalent part number for OTC 6024?
© Bosch Automotive Service Solutions LLC
Rev B, August 7, 2014
© Bosch Automotive Service Solutions LLC
Rev B, August 7, 2014
CAUTION: To prevent damage to valves and
pistons, DO NOT rotate the crankshaft and/or
camshaft(s) when removing the timing chain(s) and
installing the cylinder heads. Because this is not a free-
wheeling engine, if it has "jumped time" there will be damage
to the valves and/or pistons, which will require the removal of
the cylinder heads.
1. Install crankshaft positioning tool No. 6024 (same
as Ford No. 303-448) over crankshaft and engine front
cover alignment dowel. This will position the crankshaft
at top dead center for correct timing chain installation.
Form No. 106210
Operating Instructions
for: 6024
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
No. 6024
Install tool over front
cover alignment
dowel.
Align crankshaft woodruff
key with keyway on tool.
Ford Crankshaft Positioning Tool
Applications: 1993 & newer 4.2L, 4.6L two valve; 4.6L four valve; and 5.4L and 6.8L V-8 engines
CAUTION: To prevent damage to valves and
pistons, DO NOT rotate the crankshaft and/or
camshaft(s) when removing the timing chain(s) and
installing the cylinder heads. Because this is not a free-
wheeling engine, if it has "jumped time" there will be damage
to the valves and/or pistons, which will require the removal of
the cylinder heads.
1. Install crankshaft positioning tool No. 6024 (same
as Ford No. 303-448) over crankshaft and engine front
cover alignment dowel. This will position the crankshaft
at top dead center for correct timing chain installation.
Form No. 106210
Operating Instructions
for: 6024
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
No. 6024
Install tool over front
cover alignment
dowel.
Align crankshaft woodruff
key with keyway on tool.
Ford Crankshaft Positioning Tool
Applications: 1993 & newer 4.2L, 4.6L two valve; 4.6L four valve; and 5.4L and 6.8L V-8 engines
/