2. OTC
  3. 6468

OTC 6468 Operating instructions

  • Hello! I've reviewed the provided operating instructions for the OTC Ford Camshaft Pulley Holding Tool models 6468 and 511535. This tool is designed for 1993-1997 Ford Probe vehicles with a 2.0L engine and is crucial for timing belt service. The instructions cover the tool's proper insertion and safety precautions. I'm ready to answer your questions about the tool and its usage.
  • What is the application of the tool?
    How should the tool be inserted?
    What safety precaution is mentioned in the instructions?
Form No. 107092
Form No. 107092
Operating Instructions
for: 6468
(511535)
Operating Instructions
for: 6468
(511535)
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
Website: www.otctools.com
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
Website: www.otctools.com
Rev. C, January 19, 2015
© Bosch Automotive Service Solutions Inc.
Rev. C, January 19, 2015
© Bosch Automotive Service Solutions Inc.
Ford Camshaft Pulley Holding Tool
Application: 1993 – 1997 Ford Probe w/ 2.0L, 4 cyl., engine
Ford Camshaft Pulley Holding Tool
Application: 1993 – 1997 Ford Probe w/ 2.0L, 4 cyl., engine
1. Rotate engine to align camshaft
timing marks with crankshaft timing
marks.
1. Rotate engine to align camshaft
timing marks with crankshaft timing
marks.
WARNING: Wear eye
protection that meets ANSI
Z87.1 and OSHA standards.
WARNING: Wear eye
protection that meets ANSI
Z87.1 and OSHA standards.
2. Insert No. 6468 (511535) between
intake and exhaust cam pulleys. The
tool will t correctly only one way. The
side of tool marked UP must be facing
the technician and top of engine.
2. Insert No. 6468 (511535) between
intake and exhaust cam pulleys. The
tool will t correctly only one way. The
side of tool marked UP must be facing
the technician and top of engine.
3. Follow vehicle service manual
procedure to service timing belt as
required. Remove tool when nished.
3. Follow vehicle service manual
procedure to service timing belt as
required. Remove tool when nished.
No. 6468 (511535)
No. 6468 (511535)
Note: Same as Ford No. 303-398 (T92C-6256-AH).
Note: Same as Ford No. 303-398 (T92C-6256-AH).
/