American Standard Cadet 3 FloWise 3016.128 User manual

Brand: American Standard

Model: Cadet 3 FloWise 3016.128

Type: User manual

This manual is also suitable for

K75

Revised 2/08

CADET

3 FloWise

RIGHT HEIGHT™ ELONGATED TOILET

VITREOUS CHINA

CADET

3 FloWise

RIGHT HEIGHT™ ELONGATED TOILET

❑ 2835.128

• Vitreous china

• Meets denition for HET (High Efciency Toilet)

• High efciency (4.8 Lpf/1.28 gpf)

• Certied in EPA Water Sense Program

• Qualies in LEEDS Program

• EverClean

surface inhibits the growth of

stain- and odor-causing bacteria, mold,

and mildew on the surface

• Featuring the

Cadet

3 Flushing System

• 16-1/2" rim height for accessible application

• Elongated siphon action jetted bowl

• Fully-glazed 2-1/8" trapway

• Generous 9" x 8" water surface area

• Close-coupled tank with at tank cover for

superior storage

• Oversized 3" ush valve with chemical

resistant apper

• Chrome trip lever

• Speed Connect

tank-to-bowl coupling system

• Sanitary dam on bowl with four point

tank stabilization

• 2 color-matched bolt caps

• 100% factory ush tested

• 5 year warranty

❑ 3016.128 Right Height™ Elongated Bowl

❑ 4021.128 Tank

Nominal Dimensions:

768 x 438 x 768mm (30-1/4" x 17-1/4" x 30-1/4")

Fixture only, seat and supply by others

Alternative Tank Congurations Available:

❑ 4021.513 Tank complete with Aquaguard Liner

❑ 4021.613 Tank complete with tank cover

locking device

❑ 4021.713 Tank complete with Aquaguard Liner

and tank cover locking device

❑ 4021.813 Tank complete with trip lever located

on right side

❑ 4021.913 Tank complete with tank cover locking

device and trip lever located on right side

❑ 4021.953 Tank complete with Aquaguard Liner,

tank cover locking device and trip lever located

on right side

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Trap Seal Depth

and all Dimensions

• Los Angeles Department of Water and Power

Supplementary Purchase Specication for

Non-Adjustability

• Certied in EPA WaterSense HET program

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏ Seat: #5325.010 Elongated Champion

Slow Close

solid plastic seat and cover with easy lift off feature

❏ Seat: #5284.016 Elongated EverClean

solid plastic

seat and cover

❏ Seat: #5321.110 EverClean

Elongated Seat with

Slow Close Snap-Off Hinges

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range

of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided page

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND

ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE

BUILDING FACILITIES-CHECK LOCAL CODES.

Certiﬁed by

IAPMO R&T

SEE REVERSE FOR ADDITIONAL ROUGHING-IN

DIMENSIONS

K76

Revised 2/08

CADET

3 FloWise

RIGHT HEIGHT™ ELONGATED TOILET

VITREOUS CHINA

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range

of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided page

FINISHED WALL

FINISHED

FLOOR

C/L OF OUTLET

SUPPLY

REQ'D.

216mm

(8-1/2)

768mm

(30-1/4)

25mm ± 6mm

(1 ± 1/4)

102mm

(4)

464mm

(18-1/4)

438mm

(17-1/4)

768mm

(30-1/4)

419mm

(16-1/2)

*203mm

(8)

305mm

(12)

356mm

(14)

213mm

(8-3/8)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

*352mm

(13-7/8)

*152mm

(6)

238mm

(9-3/8)

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND

ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE

BUILDING FACILITIES-CHECK LOCAL CODES.

Certiﬁed by

IAPMO R&T

American Standard Cadet 3 FloWise 3016.128 User manual

Brand: American Standard

Model: Cadet 3 FloWise 3016.128

Type: User manual

This manual is also suitable for

Download PDF

report

American Standard Cadet 3 FloWise 3016.128 User manual

This manual is also suitable for

American Standard Cadet 3 FloWise 3016.128 User manual

Related papers

Other documents