2. American Standard
  3. 270AB.101.222
270AB.101.222

American Standard 270AB.101.222 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard 270AB.101.222 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
K213
© 2013 AS America Inc.
7/13
CADET
®
3 RIGHT HEIGHT
®
ELONGATED TOILET 10" ROUGH -IN
VITREOUS CHINA
CADET
®
3 RIGHT HEIGHT
®
ELONGATED TOILET 10" ROUGH-IN
❑ 270AB.101
•FeaturestheCadet
®
Flushing System
•Vitreouschina
•HighEfficiencyToilet(HET),ultra-lowconsumption
(4.8Lpf/1.28gpf)utilizes20%lesswater
•PowerWash
®
rimscrubsbowlwitheachush
•Includescolormatchbowlcaps
•EverClean
®
surfaceincluded
•3"ushvalve
•2-1/8"trapway
•16-1/2"rimheightforaccessibleapplications
•10"(254mm)rough-in
•Generous9"x8"watersurfacearea
•Chromenishtripleverissupplied
•1,000gMaPScore**at1.28gpf
•5yearwarranty
❑ 3717A.001RightHeight
®
ElongatedBowl
❑ 4019.101NTank
Nominal Dimensions:
724x439x768mm(28-1/2"x17-1/4"x30-1/4")
Fixtureonly,seatandsupplysoldseparately
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
•USEPAWaterSense
®
SpecicationforHETs
To Be Specied:
❏Color:❏White❏Bone❏Linen
❏Seat:#5321.110EverClean
®
ElongatedSeatwith
SlowCloseSnap-OffHinges
❏Supplywithstop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
254MM(10")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: Dimensionsofxturesarenominalandmayvarywithintherangeof
tolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
SUPPLY
AS
REQ'D.
190mm
(7-1/2")
724mm
(28-1/2")
25mm ± 6mm
(1" ± 1/4")
64mm
(2-1/2")
470mm
(18-1/2")
439mm
(17-1/4")
768mm
(30-1/4")
419mm
(16-1/2")
*203mm
(8")
254mm
(10")
356mm
(14")
216mm
(8-1/2
"
)
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
352mm
(13-7/8")
*152mm
(6")
244mm
(9-5/8")
BARRIER FREE
** Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.
Certified by
IAPMO R&T
/