Page is loading ...
RO | UV
EDGE
*IS 10500:2012 drinking water specication (Acceptable Limit)
UNLOCKS THE MINERALS
FOR BETTER ABSORPTION
EDGE
with
Stainless Steel
CONTENTS
The Power of Aquaguard® Select EDGE with Stainless Steel............................................................................... 1
Aquaguard® Select EDGE with Stainless Steel Gives You More........................................................................... 2
Installing Your Water Purifier............................................................................................................................... 3
Input Water Quality Usage Limitations................................................................................................................. 4
Here’s How your Aquaguard® Select EDGE RO+UV+MTDS with Stainless Steel Works................................. 6
Here’s How your Aquaguard® Select EDGE with UV with Stainless Steel Works................................................ 7
Tips for Safety and Maintenance of Your Aquaguard® Select EDGE with Stainless Steel.................................. 8
Important Suggestions.......................................................................................................................................... 9
Aquaguard® Select EDGE RO+UV+MTDS with Stainless Steel Purification Process...................................... 10
Aquaguard® Select EDGE UV with Stainless Steel Purification Process........................................................... 11
Technical Specifications* of Aquaguard® Select EDGE RO+UV+MTDS with Stainless Steel............................. 12
Technical Specifications* of Aquaguard® Select EDGE with UV with Stainless Steel.......................................... 13
Filter Replacement Method................................................................................................................................... 14
Know Your Aquaguard® Select EDGE RO+UV+MTDS with Stainless Steel NEXT-GEN LED Display................ 16
Know Your Aquaguard® Select EDGE UV with Stainless Steel NEXT-GEN LED Display.................................... 17
Maintaining Aquaguard® Select EDGE with Stainless Steel.................................................................................. 18
Cleaning and Disinfection of Water StorageTanks................................................................................................ 19
Zero Pressure Pump............................................................................................................................................... 20
Warranty Terms and Conditions.............................................................................................................................. 21
Aquaguard® Select EDGE with Stainless Steel removes all the harmful substances
from water and retains the good minerals. But what's really different is it's 100% steel
tank gives you fresh and healthy water always,and ensures that there is no
re-contamination or re-growth of bacteria and viruses. Along with Active Copper
Maxx™* technology that adds Calcium, Magnesium, Copper and Zinc to your drinking
water, Aquaguard® Select EDGE ensures that you get your dose of minerals from water
It comes with a special HD RO membrane that purifies water and the advanced Mineral
GuardTM technology, that retains essential natural minerals in water that other water.
purifiers deplete.
The Aquaguard® Select EDGE with Stainless Steel HD UV has a 11 watt UV lamp, with
a UV reflector housing, for an advanced UV dose to ensure 100% elimination of
waterborne disease-causing micro-organisms.
*IS 10500: 2012 Drinking Water Specification (Acceptable Limit).
THE POWER OF AQUAGUARD® SELECT
EDGE WITH STAINLESS STEEL
ACTIVE COPPER MAXXTM CARTRIDGE*
Active Copper Maxx™ is a unique combination of preserving the naturally occurring vital minerals like
Calcium, Magnesium, Copper and Zinc with antimicrobial Activated Carbon Granules. This slow-release
technology enhances the taste of the water, by removing residual dissolved harmful gases like VOCs,
and increases the level of minerals like Calcium, Magnesium, Copper and Zinc in water, at the same
time balancing the pH of water, making it healthy.
*IS 10500: 2012 Drinking Water Specification (Acceptable Limit).
**BIOTRON™ TECHNOLOGY
The Biotron is a patented (applied) Multiple Magnetic Field (MMF) generating device. It creates a
magnetic field in the water. This magnetic field breaks complex water molecules into fine micro-clusters,
making water more bio-available, so that your body can easily absorb the minerals and the goodness of
water, along with its much needed nutrients.
**a) Independent Published Scientific Research
b) Agriculture Water Management 96(2009) 1229-1236
c) Current World Environment Vol. 9(3), 1008-1016 (2014)
d) Nutrition Research and Practice (Nutr Res Pract) 2013; 7(1):34-42
MINERAL GUARD™ TECHNOLOGY
Retains essential natural minerals in the water which other water purifiers deplete.
AQUAGUARD® SELECT EDGE WITH STAINLESS
STEEL GIVES YOU MORE
Make sure that your Aquaguard® Select EDGE with Stainless Steel is installed by a trained
Eureka Forbes Service Technician only.
1. Input water must be tested for Total Dissolved Solids (TDS).
2. Install your water purifier in a suitably ventilated place. Keep it away from direct sunlight,
heating devices or areas below freezing temperature. You can keep it on the kitchen counter or wall
mount it.
3. Ensure that the input water temperature is in the range of 10°C – 40°C. Do not connect to a hot water
tap as it can damage the filters.
4. Make sue that the tap water pressure is between 0.3 kg/cm2 to 2.0 kg/cm2 for Aquaguard Select Edge
SS UV and not exceeding 3.0 kg/cm2 foe Aquaguard Select Edge SS RO+UV+MTDS.
5. After installing, run the purifier for 5-10 mins.
6. Make sure that the rejected water pipe (blue coloured pipe available in Aquaguard® Select
EDGE HD RO+UV+MTDS model only) is placed lower than the purifier, to avoid stagnation of
high TDS reject water in the pipe.
7. MTDS Regulator Operating Procedure: TDS Modulator is located inside the product. As per factory
setting, it comes in completely closed mode. The TDS level of output water can be increased by slowly
loosening (turning anti-clockwise) the spindle of the TDS modulator. Normally, a slight quarter turn is
enough to increase the TDS of output water. Rotating the spindle in clockwise direction closes the
TDS modulator, and reduces the level of TDS blending. Please note that TDS blending and its
adjustment is dependent upon the level of TDS of input water and on the TDS reduction capacity of
the RO Membrane. TDS adjustment should be done by a company authorised personnel only.
INSTALLING YOUR WATER PURIFIER
®
®
Input Water Quality Usage Limitations:
1. If the input water iron content is more than 0.3 mg/litre; use of an iron remover** is
recommended as a pre-treatment.
2. If the input water turbidity is more than 5 NTU or comprises colloidal particles, use of a
special filter** is required as a pre-filter.
3. If the input water TDS is more than 1,000 ppm (mg/L) or input water hardness is more than
300 ppm (mg/L), use of a Membrane life enhancer** is recommended.
4. Do not install the water purifier if the TDS is more than that prescribed in the Technical
Specifications.
**Available at an extra cost.
INPUT WATER QUALITY USAGE LIMITATIONS
S.N CONSUMABLE CARTRIDGES AVERAGE SERVICE LIFE
1HD - FilterTM
DIY 6,000#
litres
6,000#
litres
6,000#
litres
6,000#
litres
2Chemi-Block DIY
3HD RO Membrane Filter DIY
4UV Lamp (11 Watts) 8,000** burning hours
5Active Copper MaxxTM Cartridge DIY
6BiotronTM 6,000# litres
#
As per standard test conditions.
** As per UV manufacturer’s specifications.
FOR Aquaguard
®
Select EDGE with Stainless Steel
HERE’S HOW YOUR AQUAGUARD® SELECT EDGE
RO+UV+MTDS WITH STAINLESS STEEL WORKS
Aquaguard
®
Select EDGE RO+UV+MTDS - Stainless Steel
( WATER FLOW DIAGRAM )
NOTE : THIS IS A SCHEMATIC ILLUSTRATION OF THE PRODUCT TO GIVE A VISUAL SCHEME OF WORKING OF PRODUCTS.
THIS IS NOT AN ACTUAL ENGINEERING DRAWING OF THE PRODUCT.
FLOW RESTRICTOR
DRAIN
MINERAL GUARD
E-BOILING
QG TUBE
HD - FILTER
CHEMI BLOCK
(WITH BUILT-IN PARTICLE TRAP FILTER)
SOLENOID
VALVE
BIOTRON
CARTRIDGE
DIVERTER
VALVE
RAW WATER
INLET
DRY RUN
SENSOR
RO MEMBRANE
ZERO PRESSURE
PUMP
ACTIVE
COPPER MAXX
CARTRIDGE
WATER TAP
ELECTRONIC LEVEL
SENSOR
WATER
REGULAR
TANK
MEMBRANE LIFE ENHANCER
TDS MODULATOR
FLOW RESTRICTOR
Membrane life enhancer is
recommended to be installed
if the TDS is above 1000 ppm or
hardness above 300 ppm
HERE’S HOW YOUR AQUAGUARD® SELECT EDGE
WITH UV WITH STAINLESS STEEL WORKS
AQUAGUARD SELECT EDGE UV+SS+AC
( WATER FLOW DIAGRAM )
NOTE : THIS IS A SCHEMATIC ILLUSTRATION OF THE PRODUCT TO GIVE A VISUAL SCHEME OF WORKING OF PRODUCTS.
THIS IS NOT AN ACTUAL ENGINEERING DRAWING OF THE PRODUCT.
MINERAL GUARD
E-BOILING
QG TUBE
CHEMI BLOCK
(WITH BUILT-IN PARTICLE TRAP FILTER)
RAW WATER
INLET
ACTIVE
COPPER MAXX
CARTRIDGE
ELECTRONIC LEVEL
SENSOR
BIOTRON
CARTRIDGE
WATER
PURIFIED
TANK
DIVERTER
VALVE
FLOW RESTRICTOR
NRV
HD - FILTER
12 V SOLENOID
VALVE
LPS
TIPS FOR SAFTY AND MAINTENANCE OF YOUR
AQUAGUARD® SELECT EDGE WITH STAINLESS STEEL
1. Read attentively and understand the purifier and its functions before use.
2. Installation and service has to be conducted by authorised persons from Eureka Forbes Limited only.
3. Install the purifier at a location with ample ventilation.
4. Ensure that the purifier is installed in a dry place. Do not expose it to direct sunlight or heat sources.
5. Ensure that the installation height is ideal for comfortable reach for the user to avoid any accidental
water spill (Approx. 5 feet).
6. Do not remove or insert the plug with wet hands.
7. Replace the filters when the end of life indicator is displayed by your purifier.
8. Ensure that the filter cartridges and spares used during service/replacement are genuine and from
Eureka Forbes only.
9. Always switch off and disconnect the power plug before maintenance or cleaning.
10. In case of any damage or incorrect functioning, immediately contact an authorised service centre of
Eureka Forbes Limited. Do not repair on your own.
DO’s
• Turn OFF the main switch if you do not plan to use your Aquaguard
®
Select for more than 3-4 hours.
• Store water from your Aquaguard
®
Select in clean containers. For hygienic reasons, it is preferable not to store
water for more than 2 days.
• We recommend routine check-ups of your Aquaguard
®
Select at least once in 6 months.
• If your Aquaguard
®
Select has not been used for a long time, allow 2-3 glasses of water to flow out before
collecting the water for use.
DONT’s
• Spill water on any panel as this may lead to shock.
• Store water from your Aquaguard
®
Select in matkas and candle filters, as the water can get re-contaminated.
• Connect ordinary pipes or tubing to the outlet spout to collect water from your Aquaguard
®
Select .
• Use an extension box for power connection.
• Connect it to a hot water supply source.
• Install your Aquaguard
®
Select close to a gas stove or cooking range.
• Cover the product with plastic or cloth. Putting a cover on the product may cause damage to the product.
IMPORTANT SUGGESTIONS
AQUAGUARD® SELECT EDGE RO+UV+MTDS WITH
STAINLESS STEEL PURIFICATION PROCESS
FOR AQUAGUARD® SELECT EDGE RO+UV+MTDS WITH STAINLESS STEEL
4. Membrane Life
Enhancer***
Special anti-scalant media Prevents scaling of dissolved salts on the surface of the membrane, thereby,
enhancing the membrane life and performance.
1. HD Filter CartridgeTM High Density Multiple Layer Polypropylene Removes turbidity and other fine suspended particles such as dust, dirt, mud and
sand, giving you clear water.
2. Chemi Block (with build
in Particle Trap Filter)
Dust-free Bacteriostatic Activated Carton
Block
Reduces excess chlorine and organic impurities. Also adsorbs bad taste and odour
from the water.
3. Mineral GuardTM Microcontroller based electronic impulse
producer
Generates electronic impulses which prevent scaling/deposition of Calcium and
Magnesium on the Quartz Glass tube of the UV reflector chamber, thereby, ensuring
best UV Penetration through Quartz Glass into the water column and at the same
time keeping essential minerals like Calcium and Magnesium intact in water.
5. HD RO Cartridge Thin Film Composite (TFC) Reverse
Osmosis Membrane
Reduces TDS, Hardness, Pesticides and heavy metals like arsenic, lead and mercury.
Eliminates micro-organisms like bacteria, viruses, protozoa and cysts.
6. UV e-boiling Germicidal UV Lamp UV disinfects the water by eliminating waterborne disease-causing bacteria, viruses
and protozoa, thereby, making it safe to drink.
7. Active Copper MaxxTM
Cartridge
Bacteriostatic Taste Enhancer with Active
Copper Maxx™ Technology
Infuses Copper ions* along with other essential minerals into the water, enhances the
immune system and the taste of the water which provides a perfect blend of healthy
and tasty water. The carbon removes organic impurities and polishes the water, giving
it a sparkling look, making it pure and great to taste.
*IS 10500: 2012 Drinking Water Specification (Acceptable Limit)
8. BiotronTM Cartridge Patented Multiple Magnetic Field (MMF)
generating device
Breaks complex water molecules into fine micro- clusters, making water more
bio-permeable, so that your body can easily absorb the goodness of water, along
with its much needed nutrients.
***Not a part of the product, Membrane life enhancer is recommended if the input water TDS is more than 1,000 ppm (mg/L) or input water hardness is more than 300 ppm (mg/L).
Available at extra cost.
1. HD Filter CartridgeTM High Density Multiple Layer Polypropylene Removes turbidity and other fine suspended particles such as dust, dirt, mud and
sand, giving you clear water.
2. Chemi Block (with build
in Particle Trap Filter)
Dust-free Bacteriostatic Activated Carton
Block
Reduces excess chlorine and organic impurities. Also adsorbs bad taste and odour
from the water.
3. Mineral GuardTM Micro-controller based electronic impulse
producer
Generates electronic impulses which prevent scaling/deposition of Calcium and
Magnesium on the Quartz Glass tube of the UV reflector chamber, thereby, ensuring
best UV Penetration through Quartz Glass into the water column and at the same
time keeping essential minerals like Calcium and Magnesium intact in water.
4. UV e-boiling Germicidal UV Lamp UV disinfects the water by eliminating waterborne disease-causing bacteria, viruses
and protozoa, thereby, making it safe to drink.
5. Active Copper MaxxTM
Cartridge
Bacteriostatic Taste Enhancer with Active
Copper Maxx™ Technology
Infuses Copper ions* along with other essential minerals into the water, enhances the
immune system and the taste of the water which provides a perfect blend of healthy
and tasty water. The carbon removes organic impurities and polishes the water, giving
it a sparkling look, making it pure and great to taste.
*IS 10500: 2012 Drinking Water Specification (Acceptable Limit)
6. BiotronTM Cartridge Patented Multiple Magnetic Field (MMF)
generating device
Breaks complex water molecules into fine micro- clusters, making water more
bio-permeable, so that your body can easily absorb the goodness of water, along
with its much needed nutrients.
AQUAGUARD® SELECT EDGE UV WITH STAINLESS
STEEL PURIFICATION PROCESS
FOR AQUAGUARD SELECT EDGE UV WITH STAINLESS STEEL
®
TECHNICAL SPECIFICATIONS* OF AQUAGUARD® SELECT
EDGE RO+UV+MTDS WITH STAINLESS STEEL
#Technical Parameter Specification
1 Model Aquaguard® Select EDGE HD RO+UV+MTDS
PRODUCT SPECIFICATION
1Dimension (W X D X H) 356 mm X 268 mm X 528 mm
2 Net Weight 9 KG. (approx.)
3Purification Technology RO+UV
4Tank Volume 5 liters (approx.)
5Purification Stages /
Additional Features
Stage 1 : HD - FilterTM
Stage 2 : Mineral GuardTM
Stage 3 : Chemi-Block
Stage 5 : UV Lamp (11 Watts)
Stage 6 : Active Copper MaxxTM
Stage 7 : BiotronTM
Stage 4 : HD RO Membrance Filter
1
ELECTRICAL SPECIFICATIONS
1 Power Rating 50 Watts (max.)
2 Power Supply
Input 230 V AC External AC/DC Adaptor, 24 V DC, 2.5 Amps
3 UV Lamp 11 Watts
4 Operating Voltage Range 150 to 250 V AC, 50 Hz
5 UV Lamp Life 8,000 burning hours (as per UV lamp Manufacturer's spec.)
RECOMMENDED INPUT WATER PARAMETERS
Chlorine Content (max.) 0.2 mg/litre
2 Input Iron Content (max.) 0.3 mg/litre
3 Input Water Turbidity (max.) 5 NTU
4 Total Dissolved Solids (TDS) Up to 2,000 mg/litre++
5 Input Water Temperature 10°C - 40°C
6 Hardness (max.) 600 mg/litre
7
Input Water Pressure (range)***
Up to 3.0 kg/cm2
*Technical Specifications are subject to change without prior notice.
Note: The performance data presented in the table is applicable under standard laboratory conditions#.
Actual performance may vary depending on the input water quality, water pressure and condition of filters.
Input water quality/pressure/TDS are important determinants of recovery rate and rejection.
***If pressure is higher than the maximum specified, use of pressure regulating valve is recommended.
++If the input water TDS is more than 1000 ppm (mg/L) or input water hardness is more than 300 ppm (mg/L),
use of a Membrane life enhancer is recommended.
The above accessory is available with our company at an additional cost.
Warranty void if product is not installed as per the recommendations.
#Standard Test Conditions:
Feed Water Quality: TDS Max: 1000 mg/litre, Pressure: 1.0 kg/cm2, Turbidity: Max. 1 NTU,
Temperature: 25°C, Chlorine: Below 0.2 mg/litre, Iron: Below 0.3 mg/litre,
Life: 6,000# litres.
TECHNICAL SPECIFICATIONS* OF AQUAGUARD® SELECT
EDGE WITH UV WITH STAINLESS STEEL.
#Technical Parameter Specification
1 Model Aquaguard® Select EDGE SS UV+AC
PRODUCT SPECIFICATION
1Dimension (W X D X H) 356mm X 268mm X 528mm
2 Net Weight 8.5 KG. (approx.)
3Purification Technology UV
4Tank Volume 5 litres (approx.)
5Purification Stages /
Additional Features
Stage 1 : HD - FilterTM
Stage 2 : Mineral GuardTM
Stage 3 : Chemi-Block
Stage 4 : UV Lamp (11 Watts)
Stage 5 : Active Copper MaxxTM
Stage 6 : BiotronTM
1
ELECTRICAL SPECIFICATIONS
1 Power Rating 20 Watts(max.)
2 Power Supply
External Power Supply-230 VAC Input, Output DC Supply-12V, 1.7 A
3 UV Lamp 11 Watts
4
Operating Voltage Range
8,000 burning hours (as per UV lamp Manufacturer's spec.)
5
UV Lamp Life
150 to 250 VAC, 50 Hz
5 Solenoid Valve 12V DC-PL 6 Stem
RECOMMENDED INPUT WATER PARAMETERS
Input Water Pressure range*** 0.3-2.0 kg/cm2
2 Input Iron (max.) 0.3 mg/L
3 Chlorine Content (Max.) 0.2 mg/L
4Input Water Turbidity (Max.) 5 NTU
Up to 200 mg/L
10 C to 40 C
5 Total Dissolved Solids (TDS)
6 Water Temperature (range)
*Technical Specifications are subject to change without prior notice.
Note: The performance data presented in the table is applicable under standard laboratory conditions#.
Actual performance may vary depending on the input water quality, water pressure and condition of filters.
Input water quality/pressure/TDS are important determinants of recovery rate and rejection.
Warranty void if product is not installed as per the recommendations.
**If the input water pressureis more than 2.0kg/cm2, installationofa PRV (Pressure Reducing Valve)*
is mandatory. If the input water pressureisless than 0.3kg/cm2, installationof booster pump* is
recommended. The seaccessories are available at an extra cost.
#Standard Test Conditions:
Feed Water Quality: TDS: 200 mg/L with NaCl.
Pressure: 1 kg/cm2, Turbidity: 1 NTU (Max.), Temperature: 25º C,
Chlorine: below 0.2 mg/L, Iron: below 0.3 mg/L
Life: 6,000# Liters.
FILTER REPLACEMENT METHODS
DIY: STEPS TO REPLACE CARTRIDGE FILTER
03 Open the front fascia.
RO UV
EDGE
01 Turn o the power supply and
close the water supply before
proceeding to change the cartridge.
ON
OFF
04 Lift the tap upward.
02 Open the water dispenser tap and
empty the water from regular water
tank and Ayur water tank.
*Note – The emptied water in step 2 can then be used for
consumption purpose.
RO UV
FILTER
FILTER
FILTER
FILTER
05 Lift the cartridge upwards and
pull it towards the front using two
hands.
FILTER
FILTER
FILTER
06 Match the label and the colour
code with the lter to be replaced.
Important Note: To avoid confusion, do not remove all the lters at once. Remove, match and change the lters one by one.
07 Unclip the junction connector.
FILTER
08 Rotate Filter clockwise to
eject.
12 Pull the levers on either side of
the lters upwards to bring the
cartridge to its original position.
RO UV
FILTER
FILTER
FILTER
FILTER
11 Carefully match and re-clip the
colour-coded junction connectors.
RO UV
FILTER
FILTER
FILTER
FILTER
13 Push down levers once cartridge
is back to its position.
14 Push down the taps back to their
default position.
RO UV
EDGE
15 Fix the front fascia and turn on
the power supply and water supply.
09 Replace the new lter by rst
aligning its position to the top
manifold using the arrow guides.
FILTER
10 Grip the cartridge rmly from
the bottom, apply an upward force
and rotate anti-clockwise till it ts
completely.
FILTER
KNOW YOUR AQUAGUARD® SELECT EDGE RO+UV+MTDS
WITH STAINLESS STEEL NEXT-GEN LED DISPLAY
Indication Bar
RO / UV Icon
Process Icon
Power Icon
Call Service
Power ON
Purication Process
Tank Filling Mode
Tank Full
UV Lamp/SV/Pump Fault
DRS
EA Fault
Filter Life 1st Warning (5,400 litres)
Filter Life 2nd Warning (5,700 litres)
Filter Life EOL (6,000 litres)
Blinks for 6 secs.
Blinks at 0.5 secs. rate
Solid
OFF
OFF
OFF
Blinks every 5 secs.
Blinks every 2 secs.
Blinks every 0.5 secs.
UV icon Solid
RO & UV icon Solid
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Blinks at 0.5 secs.
OFF
Red Solid
Blinks every 5 secs.
Blinks every 2 secs.
Blinks every 0.5 secs.
ON
ON
ON
ON
OFF
ON
ON
ON
ON
Blue Solid
Blue Solid
Blue Solid
Blue Solid
Blue Light Blinks
Blue Light Blinks
ON
ON
ON
PURIFICATION PROCESS PROCESS RO/UV ICON CALL SERVICE POWER ICON INDICATION BAR
All LEDs will glow for 5 seconds
KNOW YOUR AQUAGUARD® SELECT EDGE UV
WITH STAINLESS STEEL NEXT-GEN LED DISPLAY.
Indication Bar
Process Icon
Power Icon
Call Service
Power ON
Purication Process
Tank Filling Mode
Tank Full
UV Lamp/SV Fault
LPS
EA Fault
Filter Life 1st Warning (5,400 litres)
Filter Life 2nd Warning (5,700 litres)
Filter Life EOL (6,000 litres)
Blinks for 30 secs.
Blinks at 0.5 secs. rate
Solid
OFF
OFF
OFF
Blinks every 5 secs.
Blinks every 2 secs.
Blinks every 0.5 secs.
OFF
OFF
OFF
Blinks at 0.5 secs
OFF
Red Solid
Blinks every 5 secs.
Blinks every 2 secs.
Blinks every 0.5 secs.
ON
ON
ON
ON
OFF
ON
ON
ON
ON
Blue Solid
Blue Solid
Blue Solid
Blue Solid
Blue Light Blinks @ 0.5 Secs
Blue Light Blinks @ 0.5 Secs
ON
ON
ON
PURIFICATION PROCESS PROCESS CALL SERVICE POWER ON INDICATION BAR
All LEDs will glow for 5 seconds
MAINTAINING YOUR AQUAGUARD® SELECT EDGE
WITH STAINLESS STEEL
1. Discard the first filling of water from the storage tank.
2. Drain the water from the tank if it hasn’t been used for over 48 hours.
3. Ensure that the flow restrictor is checked and replaced (if required) by the authorised service technician
during the mandatory service or in-service call.
A QUICK CHECKLIST
Problems Checkpoints Solutions
Water tastes bad 1. Is the tank clean?
2. Have you kept the purified water in the tank or too long?
3. Is it time to change the filter?
Clean the storage tank.
Dispense of water and clean the tank.
Call an authorized Eureka Forbes service technician.
Open the tap water valve.
If so, the amount of purified water will be reduced.
Call an authorised Eureka Forbes service technician.
Ensure the overhead tank is filled with water.
Ensure the tap is open.
Call an authorised Eureka Forbes service technician.
1. Is the tap water valve closed?
2. Is the tap water pressure too low?
3. Filters may be clogged or damaged?
Water dosen’t flow into
the storage tank
1. Is there water available in the overhead tank?
2. Is the main water supply tap closed?
3. Not sure what is wrong?
Water is leaking 1. Is water coming out of the tap of the purifier?
Close the tap water valve, unplug the power cord and call an
authorised
Eureka Forbes service technician.
Less water has been
purified
/
