Sony KV-36XBR400 Owner's manual

4-075-727-21

--9

FD Trinitron

TM

Digital Reality Creation

Operating Instructions

KV-32XBR400 KV-36XBR400

WARNING

To reduce the risk of fire or shock hazard, do not expose the TV to

rain or moisture.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE DE CHOC ELECTRIQUE,

NE PAS OUVRIR

PRECAUCION

RIESGO DE CHOQUE ELECTRICO

NO ABRIR

CAUTION: TO REDUCETHE RISK OF ELECTRICSHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the

presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

This symbol is intended to alert the user to the

presence of important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION

When using TV games, computers, and similar products with your

TV, keep the brightness and contrast functions at low settings. If a

fixed (non-moving) pattern is left on the screen for long periods of

time at a high brightness or contrast setting, the image can be

permanently imprinted onto the screen. Continuously watching

the same program can cause the imprint of station logos onto the

TV screen. These types of imprints are not covered by your

warranty because they are the result of misuse.

Note on Caption Vision

This television receiver provides display of television closed

captioning in accordance with §15.119 of the FCC rules.

Note on Cleaning the TV

Clean the TV with a soft dry cloth. Never use strong solvents such

as thinner or benzine, which might damage the finish of the

cabinet.

Note to CAW System Installer

This reminder is provided to call the CATV system installer's

attention to Article 820-40 of the NEC that provides guidelines for

proper grounding and, in particular, specifies that the cable ground

shall be connected to the grounding system of the building, as close

to the point of cable entry as practical.

Use of this television receiver for other than private viewing of

programs broadcast on UHF or VHF or transmitted by cable

companies for the use of the general public may require

authorization from the broadcaster/cable company and/or

program owner.

NOTIFICAIION

This equipment has been tested and found to comply with the

limits for a Class B digital device pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference with radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

J Reorient or relocate the receiving antennas.

"3 Increase the separation between the equipment and receiver.

J Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

_3 Consult the dealer or an experienced radio / TV technician for

help.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Safety

Operate the TV only on 120 V AC.

The plug is designed, for safety purposes, to fit into the wall

outlet only one way. If you are unable to insert the plug fully

into the outlet, contact your dealer.

If any liquid or solid object should fall inside the cabinet,

unplug the TV immediately and have it checked by qualified

service personnel before operating it further.

Installing

J To prevent internal heat buildup, do not block the ventilation

openings.

_l Do not install the TV in a hot or humid place, or in a place

subject to excessive dust or mechanical vibration.

The AC power cord is attached to the rear of the TV with

hooks. Do not attempt to remove the cord from these hooks.

Doing so could cause damage to the TV.

As an ENERGYSTAR®Partner,

Sony has determined that this

product or product models meets

the ENERGYSTAR®guidelines

for energy efficiency.

ENERGYSTAR®is a U.S. registered mark.

CO) TruSurround

TruSurround is a trademark of SRS

Labs, Inc. SRS and the SRS symbol are

registered trademarks of SRS Labs, Inc.

in the United States and selected foreign

countries. SRS and TruSurround are

incorporated under license from SRS

Labs, Inc. and is protected under United

States Patent Nos. 4,748,669 and 4, 841, 572 with numerous

additional issued and pending foreign patents. Purchase of this

product does not convey the right to sell recordings made with the

TruSurround technology.

FD Trinitron and the Wega logo are trademarks of Sony

Corporation.

Owner's Record

The model and serial numbers are provided on the front of this

instruction manual and at the rear of the TV. Refer to them

whenever you call upon your Sony dealer regarding this product.

Important Safeguards

For your protection, please read these instructions completely, and

keep this manual for future reference.

Carefully observe and comply with all warnings, cautions and

instructions placed on the set, or described in the operating

instructions or service manual.

WARNING

To guard against injury, the following basic safety precautions

should be observed in the installation, use, and servicing of the set.

Use

Power Sources

This set should be operated only from the type

of power source indicated on the serial / model

plate. If you are not sure of the type of electrical

power supplied to your home, consult your

dealer or local power company. For those sets

designed to operate from battery power, refer

to the operating instructions.

Grounding or Polarization

This set is equipped wJt]l a polarized AC power cord plug (a plug

having one blade wider than the other), or with a three-wire

grounding type plug (a plug having a third pin for

grounding).Follow the instructions below:

For the set with a polarized AC power cord plug

This plug will fit into the power outlet only one

way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to fit, contact your electrician to

have a suitable outlet installed. Do not defeat the safety purpose of

the polarized plug by fordng it in,

Alternate Warning

For the set with a three-wire grounding type AC plug

This plug will only fit into a grounding-type

power outlet. This is a safety feature. If you are .__Z_ L_,'_

unable to insert the plug into the outlet, contact

your electrician to have a suitable outlet installed.

Do not defeat the safety purpose of the grounding plug.

Overloading

Do not overload wall outlets, extension cords or

convenience receptacles beyond their capacity,

since this can result in fire or electric shock.

Always turn the set off when it is not to be

used. When the set is left unattended and

unused for long periods of time, unplug it

from the wall outlet as a precaution against

the possibility of an internal malfunction that

could create a fire hazard.

Object and Liquid Entry

Never push objects of any kind into the set

through the cabinet slots as they may touch

dangerous voltage points or short out parts that

could result in a fire or electric shock. Never spill

liquid of any kind on the set.

Attachments

Do not use attachments not recommended by the

manufacturer, as they may cause hazards.

Cleaning

Unplug the set from the wall outlet before

cleaning or polishing it. Do not use liquid

cleaners or aerosol cleaners.

Use a cloth lightly dampened with water for

cleaning the exterior of the set. If a snapping or

popping sound from a TV set is continuous or

frequent while the TV is operating, unplug the TV

and consult your dealer or service technician. It is

normal for some TV sets to make occasional

snapping or popping sounds, particularly when

being turned on or off.

Installation

Water and Moisture

Do not use power-line operated sets near

water -- for example, near a bathtub,

washbowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, etc.

Accessories

Do not place the set on an unstable cart, stand,

table or shelf. The set may fall, causing serious

injury to a child or an adult, and serious damage

to the set. Use only a cart or stand recommended

by the manufacturer for the specific model of TV.

An appliance and cart combination should be

moved with care. Quick stops, excessive force,

and uneven surfaces may cause the appliance and

cart combination to overturn.

Ventilation

The slots and openings in the cabinet and in the

back or bottom are provided for necessary

_l i t"

ventilation. To ensure reliable operation of the set, and to protect it

from overheating, these slots and openings must never be blocked

or co_'ered.

El

L3

CI

Cl

Never cover the slots and openings with a

cloth or other materials.

Never block the slots and openings by

placing the set on a bed, sofa, rug or other

similar surface.

Never place the set in a confined space, such

as a bookcase, or built-in cabinet, unless

proper ventilation is provided.

Do not place the set near or over a radiator

or heat register, or where it is exposed to

direct sunlight.

Power-Cord Protection

Do not allow anything to rest on or roll over the

power cord, and do not place the set where the

power cord is subject to wear or abuse.

Antennas

Outdoor Antenna Grounding

If an outdoor antenna is installed, follow the precautions below. An

outdoor antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or

where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,

EXTREME CARE SHOULD BE TAKEN TO KEEP FROM

CONTACTING SUCH POWER LINES OR CIRCUITS AS

CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.Be

sure the antenna system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in USA and

Section 54 of the Canadian Electrical Code in Canada provides

information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of antenna

discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

Antenna Grounding According to the NEC

Refer to section 54-300 of Canadian Electrical Code for Antenna

Grounding.

NEC:National Electrical Code

Antenna lead in wire

Antenna dischargeunit

(NECSection810 20)

Ground clamps

Antenna lead-in wire

Powerservicegrounding electrode

system(NECArt 250 PartH)

Lightning

For added protection for this television receiver during a lightning

storm, or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna.

This will prevent damage to the receiver due to lightning and

power-line surges.

Service

Damage Requiring Service

Unplug the set from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

/ When the power cord or plug

is damaged or frayed.

_1 If liquid has been spilled into

the set.

J If the set has been exposed to

rain or water.

J

If the set has been subject to

excessive shock by being

dropped, or the cabinet has

been damaged.

If the set does not operate

normally when following the

operating instructions. Adjust

only those controls that are

specified in the operating

instructions. Improper

adjustment of other controls

may result in damage and

will often require extensive

work by a qualified technician

to restore the set to normal operation.

F_aY'r_ o_" "rAiJr

N

When the set exhibits a distinct change in performance -- this

indicates a need for service.

Servicing

Do not attempt to service the set yourself since

opening the cabinet may expose you to dangerous

voltage or other hazards. Refer all servicing to

qualified service personnel.

Replacement Parts

When replacement parts are required, be sure the service

technician certifies in writing that he has used replacement parts

specified by the manufacturer that have the same characteristics as

the original parts.

Unauthorized substitutions may result in fire, electric shock, or

other hazards.

Safety Check _.._=,o,

Upon completion of any service or repairs to the .-_--_x_

set, ask the service technician to perform routine

safety checks (as specified by the manufacturer) to

determine that the set is in safe operating

condition, and to so certify. When the set reaches

the end of its useful life, improper disposal could _,j

result in a picture tube implosion. Ask a qualified _•

service technician to dispose of the set.

Contents

Introducing the FD Trinitron VVega

Overview ................................................................ 1

Presenting the FD Trinitron Wega ...................... 2

Using the Remote Control ................................... 3

Installing the TV

Overview ................................................................ 5

Connecting a Cable or Antenna .......................... 6

Connecting a VCR and Cable .............................. 9

Connecting a VCR and Cable Box .................... 10

Connecting Two VCRs for Tape Editing ......... 11

Connecting a Satellite Receiver ......................... 12

Connecting a Satellite Receiver with a VCR ...13

Connecting an Audio Receiver ......................... 14

Connecting a DVD Player with Component

Video Connectors ........................................ 15

Connecting a DVD Player with A/V

Connectors ................................................... 16

Connecting a Digital TV Receiver .................... 17

Connecting a Camcorder ................................... 17

Using the CONTROL S Feature ........................ 18

Setting Up the TV Automatically ..................... 18

Using the Features

Overview .............................................................. ] 9

Using Favorite Channels .................................... 20

Using Twin View ................................................ 21

Using the Freeze Function ................................. 23

Using the Menus

Overview .............................................................. 25

Using the Video Menu ....................................... 26

Using the Audio Menu ...................................... 28

Using the Channel Menu ................................... 30

Using the Parent Menu ...................................... 31

Using the Timer Menu ....................................... 34

Using the Setup Menu ........................................ 35

Other Information

Overview .............................................................. 37

TV Controls and Connectors ............................. 38

Using the Remote Control ................................. 40

Troubleshooting .................................................. 46

Specifications ....................................................... 48

Index ..................................................................... 51

V

Overview

This chapter defines the contents of your Wega TV, and provides an

overview of how to set up and use basic features.

Topic Page

Presenting the FD Trinitron Wega 2

using the Remote control 3

Introducing the FD Trinitron Wega

Presenting the FD Trinitron Wega

The FD Trinitron Wega (pronounced VAY-GAH) is characterized by

outstanding contrast, uncompromising accuracy, and corner-to-

corner detail.

You'll recognize the superiority of Wega technology almost

immediately. The first thing you'll notice is minimal glare from the

flat picture tube. This flat-screen technology improves picture detail

without distortion, unlike conventional curved screens. The FD

Trinitron delivers outstanding image detail not only at the screen

center, but also at the corners -- so you can enjoy a bright, clear

picture from any location in a room.

Features Some of the features that you will enjoy with your new TV include:

DRC-MF (Digital Reality Creation, Multi Function): Unlike

conventional line doublers, the DRC feature doubles vertical and

horizontal lines, resulting in four times the density for quality

sources such as DVD, Satellite and Digital camcorder.

J Twin ViewTM: Using Multi-Image Driver (MIDX), Twin View

allows you to watch two programs side by side with the ability to

zoom in one picture. You can watch pictures from two different

sources (1080i, 480p and 480i) simultaneously.

J 16:9 Enhancement: Vertical Compression technology that

maximizes picture resolution on "anamorphic" or "enhanced for

widescreen" sources, including selected DVDs.

O Velocity Modulation: Vertical line enhancement that sharpens

picture definition.

o Steady Sound: Equalizes volume levels so there is consistent

output between programs and commercials.

21 Parental Control: V-Chip technology allows parents to block

unsuitable programming for younger viewers.

o Component Video Inputs: Offers the best video quality for DVD,

(480p, 480i) Digital Set-top box (HD1080i) connections.

2i S-VIDEO Inputs: Provides a high-quality image for connected

equipment.

E3 Favorite Channel Preview: Preview up to eight favorite channels

without leaving the current channel.

2

Introducing the FD Trinitron Wega

Using the Remote Control

Inserting Batteries Insert two size AA (R6) batteries (supplied) by matching the + and -

on the batteries to the diagram inside the battery compartment.

Removethe batteries to avoid damagefrom possible battery leakagewhenever you

anticipate that the remotecontrol will not be usedfor an extended period.

Handlethe remote control with care.Avoid dropping it, getting it wet, or placing it in

direct sunlight, neara heater,or where the humidity is high.

Remote Control

Overview

SLEEP DISPLAY

GUIDE

Q®®

®®®

FUNCTION--

W/VIDEO VC4_OVD SAT/CABLE IV

CD _ OCD

0 0

RESET AV 12 3 Ovo RM-Y174

SONY

[ TV

Here's an overview of the buttons on the remote control you will

probably use most often. For a complete description of the remote

control, see "Using the Remote Control" on page 40.

To Do This ... Use This Button

Turn the TV TV (POWER)

on and off

Select channels 0 - 9 and ENTER

directly Press 0 - 9 to select a channel, the channel changes

after 2 seconds. Press ENTERfor immediate selection.

Scan through CH +[-

channels

[] Toscan rapidlythrough the channels,pressand hold down

the CH+ or CH-button.

Adjust the volume VOL +l-

Switch video inputs TVNIDE0

(such as a VCR) Press repeatedly to toggle through all video inputs.

Display the Menu to MENU

make changes to the For details, see "Using the Menus" on page 25.

TV

View the Favorite FAVORITES

Channels list For details, see "Using Favorite Channels" on

page 20.

Using the on-screen _ ,,c_ _ ,._.

functions

Move

Select

3

Overview

This chapter includes illustrated instructions for setting up ),our TV:

Topic Page

Connecting a Cable Or Antenna 6

connecting a VCR and Cable

Connecting a vcR and cable Box 10

9

Connecting Two VCRs for Tape Editing 11

Connecting a Satellite Receiver 12

connecting a sateiiite Receiver With a VCR 13

Connecting an Audio Receiver 14

Connecting a DVD ]?layer with Component Video 15

Connectors

connecting a DVD piayer with Aiv co_ectors 16

Connecting a Digital TV Receiver 17

Using the CONTROL S Feature 18

setting up the TV Automaticaiiy ............................. 18

Note About the AC

Power Cord

The AC power cord is attached to the rear of the TV with hook. Use

caution when removing the AC plug from its holder. Gently slide the

plug in the upward direction to remove from hook. Once removed,

the AC power plug should automatically disengage from its stored

location.

AC Power cord

You can detach

the cord from

this hook

5

Installing the TV

Connecting a Cable or Antenna

Connecting Directly

to Cable or an

Antenna

The connection you choose depends on the cable found in your

home. Newer homes; are equipped with standard coaxial cable (see

[]); older homes probably have 300-ohm twin lead cable (see I'/1); still

other homes may contain both (see []).

[] VHFOnlyor VHF/UHF or Cable

75-ohm VHFIUHF

coaxial 3_])m _

cable

Rear of TV

[] VHF Only or UHF Only or VHF/UHF

300-ohm twin

lead cable VHFIUHF

I '(_ _ [_l _ Rear of TV

Antenna connector

[]

VHF and UHF

75-ohm

coaxial cable

_""I

_=__HFRear of TV

U/V Splitter

I :_ (not supplied)

300-ohm twin

lead cable

6

Installing the TV

Cable and Antenna

If your cable provider does not feature local channels, you may find

this set up convenient.

CATVcable

AUX

_),-,-,,,,i_ Rear ofTV

(No connection to (_

TO CONVERTER)

TO CONVERTER

Antenna cable

VHFIUHF

Select CABLE or antenna (ANT) mode by pressing ANT on the remote

control.

_:_ In order to receivechannelswith an antenna, you need to turn your Cableto OFFand

perform the Auto Programfunction (seepage 30).

Cable Box

Connections

Some pay cable TV systems use scrambled or encoded signals that

require a cable box to view all channels.

Cable Box

2

Connect the coaxial connector from your cable service to the

cable box's IN jack.

Using a coaxial cable, connect the cable box's OUT jack to the

TV's VHF / UHF jack.

Cable

| |

oo'

Cable box

VHFIUHF

Rear of TV

If you will be controlling all channel selectionthrough yourcable box, you should

consider usingthe ChannelFixfeature (seepage 30).

7

Installing the TV

CableBoxand Cable

For this set up, you can switch between scrambled channels (through

your cable box), and normal (CATV) channels by pressing ANTon the

remote control.

Cable box AUX

.earo Tv

OUT

TO CONVERTER

7S-ohm coaxial cable (not supplied)

, Signal

i

VHF/UHF

CAW cable (unscrambled channels)

_:_ YourSonyremote control can be programmed to operateyour cable box(see

"Programming the RemoteControl" on page 42).

When using FavoriteChannel orTwin View, you cannot view the AUX input in the

window picture.

PressingANT switches between these inputs.

If you areconnecting atcablebox through the AUX input and would like to switch

between the AUXand normal (CAW) input you shouldconsider usingthe Channel Fix

feature (seepage 30).

8

Installing the TV

Connecting a

VCR and Cable

1

2

Connect the cable TV cable to the VCR's IN jack.

Using a coaxial cable, connect the VCR's OUT jack to the TV's

VHF / UHF jack.

Using an A/V cable, connect the VCR's A/V OUT jacks to the

TV's A/V IN jacks.

_:a If your VCRhasan SVIDEOjack: Forbest picture quality, usean SVIDEOconnection

instead of the yellow video cableon your combined A/V cable. Usingan SVIDEOcable,

connectthe VCR'sS VIDEOOUTjack to the TV's SVIDEOINjack. S VIDEOdoesnot

provideaudio, soaudio cablesmust still be connectedto provide sound.

TV

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

@

AUX

@

TO

CONVERTER

VHF/LIHF

AIV cable

Coaxial cable 2

'{_ VCR

! I !

/;

IN

Cable

9

Installing the TV

Connecting a

VCR and Cable Box

2

3

Connect the single (input) jack of the splitter to your incoming

cable connection, and connect the other two (output) jacks (using

coaxial cable) to IN on your cable box and VHF / UHF on your TV.

Using a coaxial cable, connect the cable box's OUT jack to the

VCR's VHF / UHF IN jack.

Using an A/V cable, connect the VCR's A/V OUT jacks to the

TV's A/V IN jacks.

If your VCRhasan SVIDEOjack: Forbest picture quality, usean SVIDEOconnection

instead of the yellow video cableon your combined AN cable. Using an SVIDEOcable,

connectthe VCR'sS'VIDEOOUTjackto the TV's SVIDEOINjack. SVIDEOdoes not

provide audio, so audio cables must still be connectedto provide sound.

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

I

VCR

TV

I ' vloEo IN JMONITO

S VlOEO

Vl O

JAUOIO

_r

,v_,, - v

- p=

- p.

AUOlO

\

A/V cable

Coaxial

cable

1

Splitter

(not supplied)

10

Installing the TV

Connecting Two VCRs for Tape Editing

If you connect two VCRs, you can use the TV's MONITOR OUT

feature to perform tape-to-tape editing. In the connection shown

below, the TV functions as a monitor and sends the program being

played by the playback VCR to the recording VCR.

Connect the VCR intended for playback using the connection

instructions on page 10 of this manual.

2

Using A/V connectors, connect AUDIO and VIDEO IN on the

VCR intended for recording to MONITOR AUDIO and VIDEO

OUT on your TV.

Youcannot record signalsfrom equipment connectedto the Y,Ps,PRinput.

TV

@

^ux

@

TO

CONVERTER

@

VHF/UHF

A/V cable

VCR (recording)

............

,.

Toperform tape editing, set the TVto the video input intended for playbackby pressing

the TV/VlDEObutton on the remotecontrol.

11

Installing the TV

Connecting a Satellite Receiver

1 Connect the satellite antenna cable to the satellite receiver's

SATELLITE IN jack.

2 Using an A/V cable, connect the satellite receiver's A/V OUT

jacks to the TV's A/V IN jacks.

3 Connect a coaxial cable from your cable or antenna to the TV's

VHF / UHF jack.

If your satellite receiverhasan SVIDEOjack: Forbest picture quality, usean SVIDEO

connection instead of the yellow video cable on your combined AIV cable. Using an S

VIDEOcable,connect the satellite receiver'sVIDEOOUTjack to the TV's SVIDEOIN

jack. SVIDEOdoesnot provideaudio, soaudio cablesmust still be connectedto provide

sound.

TV

swoco

VIDEO

AUDIOR__

AUDIO-R (red) _;_

AUDIO-L (white) _

VIDEO (yellow)

- p_

c R

-_ - p_

)._ AUDIO VHF/UH_

-R

Coaxial

J cable

3

Satellite receiver

.... _'_1 1

o_,1_ ......... so _

,._ .... J_)_) I | Satellite

•r 1" 1" _ antenna

" " " cable

AIV cable

12

Installing the TV

Connecting

a Satellite Receiver with

a VCR

1 Connect the satellite antenna cable to the satellite receiver's

SATELLITE IN jack.

2 Connect the CATV cable to the VCR's VHF/UHF IN jack.

3 Using a coaxial cable, connect the VCR's OUT jack to the TV's

VHF / UHF jack.

4 Using an A/V cable, connect the satellite receiver's A/V OUT

jacks to the VCR',; A/V IN jacks.

5 Using an A/V cable, connect the VCR's A/V OUT jacks to the

TV's A/V IN jacks.

IV

sviol _

vl_E i FB

AUDI _10

AUDIO4 (white)

VIDEO (yellow)

A/V cable

O

AUX

@

TO

CONVERTER

VHrIU.F

Coaxial

cable

Coaxi_

cabl

I

Satellite receiver _ 1

l ....L

o_I@®®® I.....

VCR _4

Io r....

13

Installing the TV

Connecting an Audio Receiver

1 Using audio cables, connect the TV's AUDIO OUT jacks to the

audio receiver's audio LINE IN jacks.

TV

_uo,o-._0_-_

(red) _ (white)

I_1 input I_ t_ I_I

I_II=_o_olI_-_I

____HIL -i_

@

Au×

@

To

CONVeRtER

@

VHr/UHF

14

Installing the TV

Connecting a DVD

Video Connectors

Player with Component

Using three separate component video cables, connect the DVD

player's Y, PB, and PR jacks to the Y, PB, and PR jacks on the TV.

_:a TheY,PB,and PRjackson your DVDplayeraresometimeslabeled Y,CB,and CR,or

Y,B-Y,and R-Y.If so, connectthe cablesto likecolors.

TheY,PB,and PRjacks do not provideaudio, soaudio cablesmust beconnectedto

providesound.

2 Using an audio cable, connect the DVD player's audio OUT jacks

to the TV's audio IN jacks.

DVD player

2

Component video cables I_I_

i @

VIDEOIN M0mX( AUO

OUT OU AUX

CONVERTER

@

@ ®

Audio cable

AUDIO-R (red)i_

AUDIO-L (white) V

TV

@

VH_IUHF

15

Installing the TV

Connecting a DVD Player with A/V Connectors

_:u If your DVDplayer hasvideo component output connectors:for bestpicture quality use

the connectiondescribedon page 15.

2

Using audio cables, connect the DVD player's audio OUT jacks to

the TV's audio IN jacks.

Using an S VIDEO cable, connect the DVD player's S VIDEO jack

to the TV's S VIDEO jack.

TV

SVIDEO ,-._,

cable

DVD player

LINE OUT

2

Audio cable

L_8%J®

_ AUDIO-R (red)

AUDIO-L (white)

16

Page is loading ...

Sony KV-36XBR400 Owner's manual

This manual is also suitable for

Sony KV-36XBR400 Owner's manual

Related papers

Other documents