Sony KV-32FV1 User manual

Brand: Sony

Model: KV-32FV1

Category: CRT TVs

Type: User manual

This manual is also suitable for

KV-36FV1

3-862-737-21 (1)

Operating Instructions

KV-32FV1 KV-36FV1

Remote Control

Keep this flap unfolded and use this page

forreference,

SYSTEM OFF

(page 16)

TV/VTR (page 16)

DISPLAY --

SLEEP --

JUMP --

.' TV/DBS --

(page 16)

RESET --

(pages 21 and 22)

VOL +/- --

CODE SET

(pages 26-28)

MUTING

(POWER)

SONY

-- ENTER

-- MTS/GUIDE (page 22)

Select buttons

(pages 13 and 19)

-- MENU

CH +/-

Getting to know the buttons on

the remote control

Names of the buttons on the remote

control are presented in different colors to

represent the available functions.

Button color

Clear ................ Press to select the component

you want to control; e.g.

VTR (VCR)/DVD, DBS (Direct

Broadcast Satellite)/CABLE,

or TV

Green ............... Buttons relevant to power

operations, like turning the

TV, DBS (Direct Broadcast

Satellite)/CABLE, or

VTR (VCR)/DVD on or off

Label color

White ............... TV/VTR (VCR)/DVD/DBS

(Direct Broadcast Satellite) /

CABLE operation buttons

Yellow .............. PIP operation buttons

Blue .................. DBS (Direct Broadcast

Satellite) operation buttons

Green ............... SYSTEM OFF operation button

For a detailed eAphlmltion lff most buttons, see

"Watchi_ tile TV" _s page 15.

WARNING

To reduce the risk of fire or shock hazard, do not

expose the TV to rain or moisture.

ATTENTION

RISOUE DE CHOC ELECTRIQUE

NE PAS OUVRIH

PRECAUClON

RIESGO DE CHOQUE ELECTRiCO

NO ABRIR

CAUTION: TO REDUCETHE RiSK OF ELECTRIC SHOCK,

O0 NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFERSERVICING TO OUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to

the presence of uninsulated "dangerous

voltage" within the product's enclosure that

may be of sufficient magnitude to constitute

a risk of electric shock to persons.

This symbol is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION

TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS

POLARIZED AC PLUG WITH AN EXTENSION CORD,

RECEPTACLE, OR OTHER O_ UNLESS THE BLADES CAN

BE FULLY INSERTED TO PREVENT BLADE EXPOSURE,

CAUTION

When using W games, computers, and similar products

with your TV, keep the brightness and picture contrast

functions at low settings. If a fixed (non-moving)

pattern is left on the screen for long periods of time at

a high brightness or picture contrast setting, the image

can be permanently imprinted onto the screen.

Continuously watching the same program can cause

the imprint of station Iogos onto the TV screen. These

types of imprints are not covered by your warranty

because they are the result of misuse.

Note on Caption Vision

This television receiver provides display of television

dosed captioning in accordance with §15.119 of the

FCC rules.

Note on cleaning the TV

Clean the TV with a soft dry cloth. Never use strong

solvents such as thinner or benzine, which might

damage the finish of the cabinet.

Note to CATV system installer

This reminder is provided to call the CATV system

instager's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be

connected to the grounding system of the building, as

close to the point of cable entry as practical.

Use of this television receiver for other than private

viewing of programs broadcast on UHF or VHF or

transmitted by cable companies for the use of the

general public may require authorization from the

broadcaster/cable company and/or program owner.

NOTIFICATION

This equipment has been tested and found to comply

with the limits for a Class B digital device pursuant to

Part 1S of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

inteference with radio communications. However.

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antennas.

• Increase the separation between the equipment and

receiver.

• ConnecttheequipmentintoanoutletonacJrcuit

different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for hetp.

I YOUare cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

This document is for the remote controt RM-Y167.

MODELS: KV-32FVI, 36FVI

As an ENERGY STARe Partner,

Sony has determined that this

product or product models meets

the ENERGY STARe guidelines

for energy efficiency.

ENERGY STARe isa U.S. registered mark.

ii Welcome!

rhank you for purchasing the Sony

Frinitron ®Color TV. Before reading, check

fie model number located on the front of this

manual or on the rear of your TV.

Pae features you willenjoy include:

A flat CRT, for optimal picture quality

Component video (Y, Ps, P_ inputs for the

highest quality DVD Player connection

Dual tuner PIP, which allows you to watch

two programs at once without first

connecting any additional equipment

The FAVORITE CHANNEL feature, which

allows you to preview each of your chosen

favorite channels in a small window

picture before you choose to tune to a

particular channel

• AfrontA/Vinput, foreasyconnectionof

your cameorder or game equipment

• Two S VIDEO inputs, for enhanced picture

quality

Precautions

Safety

• Operate the TV only with 120 V AC.

• The plug is designed, for safety purposes,

to fit in the wail outlet only one way. If

you are unable to insert the plug fully into

the outlet, contact your dealer.

• If any liquid or solid object should fall

inside the cabinet, unplug the TV

immediately and have it checked by

qualified personnel before operating it

further.

• If you will not be using the TV for several

days, disconnect power by pulling the

plug itself. Never pull on the cord.

For details concerning safety precautions, see the

supplied leaflet "IMPORTANT SAFEGUARDS".

Installing

• To prevent internal heat build-up, do not

block the ventilation openings.

• Do not install the TV in a hot or humid

place, or in a place subject to excessive

dust or mechanical vibration.

• The AC power cord is attached to the rear

of the TV with hooks. Do not attempt to

remove the cord from these hooks. Doing

so could cause damage to the TV.

Using This Manual

This manual is divided into five major

sections. We recommend that you carefully

review the contents of each section in the

order presented to ensure that you fully

understand the operation of your new TV.

I Connecting and Installing the TV

This section guides you through your

initial set up. It shows how to connect to

your antenna or cable, and connect any

accessories or components.

2 BasicSet Up

This section teaches you the basic skills

needed to operate your new TV. It shows

you how to operate special functions of the

remote control.

Using your New TV

Thissectionshows you how tobeginusing

your new TV, Itshows how touse theEasy

SetUp Guide feature,and how touse your

remotecontrol.

4 UsingyourMenus

This section teaches you how to access

on-screen menus and adjust your TV's

settings.

5 Troubleshooting

This section helps you to correct problems

you may encounter with your TV.

Instructions in this manual are written for the

remote control. Similar controls may be found on

the TV console.

Connecting and Installing the TV

Making Connections

Refer to the table below, it will direct you to the diagram suitable to the components you will be

connecting.

Ifiw-uw_ll be connecting ....... _"............................ " "

Cable or antenna only 3

Cable and antenna 3

Cable box 4

Cable box and cable to view scrambled channels 4

VCR and cable or antenna 5

VCR and cable box 5

Two VCRs for tape editing 6

Direct Broadcast Satellite Receiver (DBS) 7

VCR and Direct Broadcast Satellite Receiver (DBS) 7

DVD Player 8

DvD Player with component video output connectors 8

Audio system 9

A/V receiver 9

Camcorder to view tapes 10

' CONTROL S 11

VCR using S-Link 12

Direct Broadcast Satellite Receiver (DBS) using S-Link 12

Note about the AC Power Cord

The AC power cord is attached to the rear of

the TV with hooks. Use caution when

removing the AC plug from its holder. Gently

slide the cord in the upward direction, without

removing the cord from the two lower hooks.

YOUcan

detach the

cord from

this hook

DO not remove

the cord from

these hooks.

AC P

cord

Cable or Antenna Connections

Connecting directly to cable or an

antenna

The connection you choose will depend on the

cable found in your home. Newer homes will

be equipped with standard coaxial cable (see

A); older homes will probably have 300-ohm

twin lead cable (see B); still other homes may

contain both (see C).

75-ohm (Rearof TV)

A • VHF only coaxiaicable VHF/UHF

• v.e,u.F

• Cable

300-ohm twin (Rear of TV)

B • VHF only lead cable VHF/UHF

• UHF only

• VHF/UHF Antenna connector _)

75-ohm coaxial cable

C • VHF----_)_

(Rear of TV)

and _)VHl_

EAC-66 U/V mixer

• UHF ===_1_ l"

(not supplied)

300-ohm twin lead cable

Cable and antenna

You may find it convenient to use the

following set up if your cable provider does

not feature local channels that you are able to

receive using an antenna.

(Rear of IV)

CATV cable AUX

(No connection "TO

CONVERTER" in this case)

TO CONVERTER

Antenna cable

VHF/UHF

Select cable or antenna mode by pressing

ANT on the remote control.

Note

• In order to receive channels with an

antenna, you will need to eum your

CABLE to OFF and perform the AUTO

PROGRAM function. (see "CHANNEL

SET UP" on page 24)

Connecting and Installing the TV (continued)

Cable Box Connections

Some pay cable TV systems use scrambled or

encoded signals that require a cable box to

view all channels.

Cable box

1 Connect the coaxial connector from your

cable to the IN on your cable box.

2 Using a coaxial cable, connect OUT on

your cable box to VHF/UHF on your TV.

I Ifyouwillbecontrollingallchannelselection

through your cable box, you should consider

using the CHANNEL FIX feature. (see page 24)

Cable

-3

(Rear of TV)

VHF/UHF

[--_--] OUT

Cablebox

Cable box and cable

For this set up, you can switch between

scrambled channels (through your cable box),

and normal (CATV) channels by pressing

ANT on your remote control.

Notes

• Your Sony remote control can be

programmed to operate your cable box.

(see page 26)

• When using PIP, you cannot view the

AUX input in the window picture.

Tip"_ o

Pressing ANT switchesbetween theseinputs.

I fyou are connecting a cable box through theAUXinputand

would like to switch between the AUX and normal (CATV) input

you should consider using the CHANNEL FIX feature. (see page 24)

Cable box (Rear of TV)

AUX

scrambled

channels TO CONVERTER

75-ohm coaxial ,_ (signal)

cable (not supplied) VHF/UHF

CATV cable

(unscrambled channels)

VCR Connections

Connecting an antenna/cable TV

system with a VCR

1 Attach the coaxial connector from your

cable or antenna to IN on your VCR.

2 Using A/V connectors, connect AUDIO

and VIDEO OUT on your VCR to AUDIO

and VIDEO IN on your TV*.

3 Using a coaxial connector, connect OUT on

your VCR to VHF/UHF on your TV.

• If you are connecting a monaural VCR, connect only the

single white audio output to the left input on your TV.

Connecting a VCR and TV with a

cable box

1 Connect the single (input) jack of the

Splitter to your incoming cable connection,

and connect the other two (output) jacks

(using coaxial cable) to IN on your cable

box and VHF/UHF on your TV.

Using a coaxial connector, connect OUT on

your cable box to IN on your VCR.

3 Using A/V connectors, connect AUDIO and

VIDEO OUT on your VCR to AUDIO and

VIDEO IN on your TV.

For optimum picture quality, use S VIDEO

instead of the yellow AN cable. S VIDEO

does not provide sound, your audio

connectors must still be connected.

Coaxial cable

Cable

(Rear of TV)

VMC-810S/820S (not supplied)

(Rear of "IV)

Coaxial cable

Cable 2L_ _

__.. 3 VMC-810S/820S (not supplied)

Splitter Cable box

(not supplied)

(red)

(white)

(yellow)

(red)

(white)

{yellow)

Connecting and Installing the TV (continued)

Connecting two VCRs

MONITOR OUT gives you the ability to use a

second VCR to record a program being played

by the primary VCR or to perform tape

editing and dubbing.

1 Connect the VCR intended for playback

using the connection instructions on page

4 of this manual.

2 Using A/V connectors, connect AUDIO

and VIDEO IN on your VCR intended for

recording to MONITOR AUDIO and

VIDEO OUT on your TV.

Notes

• If you will be connecting your A/V

receiver to external speakers, you do not

need to connect AUDIO OUT on your

A/V receiver to AUDIO IN on your TV.

• You cannot record signals from equipment

connected to the Y, PB, PR input.

Do not change the input

signal while editing through

MONITOR OUT.

(Rear of TV)

VCR (for playback)

VMC-810S/82OS (not supplied)

VCR (for recording)

_=_="_ _ AUDIO-R (red)

-- A A A _1 _ AUDIO-L (white)

2 _/_ _ VIDEO (yellow)

VMC-810S/820S (not supplied)

DBS Connections

Connecting a DBS (Direct

Broadcast Satellite) receiver

1 Connect the cable from your satellite

antenna to your DBS receiver.

2 Attach the coaxial connector from your

cable or antenna to VHF/UHF on your TV.

3 Using A/V connectors, connect AUDIO

and VIDEO OUT on your DBS receiver to

AUDIO and VIDEO IN on your TV.

Connecting a DBS (Direct Broadcast

Satellite) receiver and a VCR

1 Connect the cable from your satellite

antenna to your DBS receiver.

2 Attach the coaxial connector from your

cable or antenna to VHF/UHF IN on your

VCR.

3 Using a coaxial connector, connect

VHF/UHF OUT on your VCR to

VHF/UHF on your TV.

4 Using A/V connectors, connect AUDIO

and VIDEO OUT on your DBS receiver to

AUDIO and VIDEO IN on your VCR.

5 Using A/V connectors, connect AUDIO

and VIDEO OUT on your VCR to AUDIO

and VIDEO IN on your TV.

Foroptimumpicturequality,useSVIDEO

insteadof the yellowAN cable.S Videodoes |

not provide sound, your audioconnectors

Imuststill be connected.

DBSreceiver |

Satellite I _ _1

antenna I _._ _-_i__ _ _'_1 I

cable

VMC-810S/820S (not supplied)

(Rear of "IV)

Pressing TV/VIDEO on the remote control will

l allow you to view from the DBS or VCR. I

VMC-810S/820S (not supplied) (Rear of W)

1_ 4 , I 2

_ ._,_ VCR

DBS receiver

VMC-810S/820S (not supplied)

(red)

[white)

(yellow)

(red)

(white)

(yellow)

_" _ Connecting and Installing the TV (continued)

DVD Player Connections

Connecting a DVD Player

Using A/V connectors, connect VIDEO IN on

your TV to LINE OUT on your DVD Player.

Connecting a DVD Player with

component video output connectors

This connection option offers the highest

quality DVD picture.

1 Using AUDIO connectors, connect AUDIO

R and L of the LINE OUT on your DVD

Player to AUDIO R and L on the VIDEO IN

4 panel at the rear of your TV.

2 Using three VIDEO connectors, connect Y,

PB, and PR on the COMPONENT VIDEO

OUT on your DVD Player to Y, PB, and PR

on the VIDEO IN 4 panel at the rear of

your TV.

Note

• Some DVD Player terminals may be

labeled Y, CB,and CR, or Y, B-Y, and R-Y.

If yours are labeled so, connect them by

matching the colors.

For optimum picture quality, use S VIDEO

instead of the yellow AN cable. S VIDEO does

not provide sound, your audio connectors

must still be connected.

(Rear of DVD player)

(Rearof W)

A m

_ UDIO-R (red)

AUDIO-L (white)

VIDEO(yellow)

VMC-810S1820S (not supplied)

f Ill

DVD

RK-74A

(not supplied)

(RearofTV)

-y

_,_,

AUDIO-R (re(

AUDIO-L (white)

Additional Connections

Connecting an audio system

For an enhanced sound, connect your audio

system to your TV.

1 Using AUDIO connectors, connect AUDIO

OUT on your TV to one of the unused Line

inputs (e.g. Tape-2, AUX1, etc.) on your

stereo.

2 Set your stereo to the chosen Line input

and use the AUDIO menu to set your

audio output. (see "SPEAKER" and

"AUDIO OUT" on page 22)

Connecting an AN receiver

1 Using A/V cables, connect TV OUT on

your TV to TV IN on your A/V receiver.

2 Using A/V cables, connect A/V OUT on

your receiver to VIDEO IN on your TV.

Note

• If you will be connecting your A/V

receiver to external speakers, you do not

need to connect AUDIO OUT on your

A/V receiver to AUDIO IN on your TV.

Tip'S"

You may want to useCHANNEL FIX tofix your TV's

input to theA/V receiver(VIDEO 1). (see "CHANNEL

SET UP" mrpay:e24)

(Rear of TV)

n m _

_.°

RK-74A

AUDIO-L (white) (not supplied)

AUDIO-R (red)_ _l-ine

AUDIq

AUDIO-R (red)

AUDIO-L (white) --_

VIDEO (yellow)

VMC-810S/820t (not supplied) _/

(Rear of TV)

V outputs

A/V receiver

1 _/v inputs

VMC-810S/820S (not supplied)

iB _ Connecting and Installing the TV (continued)

Connecting a camcorder

This connection is convenient for viewing a

picture directly from your camcorder.

Using A/V connectors, connect AUDIO and

VIDEO OUT on your camcorder to AUDIO

and VIDEO IN on your TV.

Connection can also be made directly to your

A/V input located on the rear of your TV.

Note

• If you are connecting a monaural camcorder,

connect only the single white audio output

to the left input on your TV.

I If you have an S VIDEO equipped camcorder,

you can use an S Video cable for optimum

I picture quality.

P _ _v_*o_Juo_ m

4. _o JVb

I I I

AUDIO-R (red)_

AUDIO-L (white)_ U

VIDEO (yellow) ---_

VMC-810S/820S

(not supplied)

A/V output

Using Special Sony Features

Using the CONTROL S feature

CONTROL S allows you to control your TV

and other Sony equipment with one remote

control.

To control your other Sony equipment with

},our TV's remote control, connect the

CONTROL S IN jack of the equipment to the

CONTROL S OUT jack on the TV with the

CONTROL S cable.

To control other Sony equipment with your

TV's remote control, see the next page.

Note

• You can also program your remote control

to control other equipment. (see "Operating

Video Equipment" on page 26)

(Rear of TV)

Connecting and Installing the TV (continued)

Connecting S-Link to a VCR

S-Link will automatically power on the TV

and switch to the correct video input when a

tape is inserted in the VCR.

1 Using A/V connectors, connect AUDIO

and VIDEO OUT on your VCR to AUDIO

and VIDEO IN on your TV.

2 Using an S-Link connector (mono mini

plug), connect S-LINK on your VCR to

S-LINK/CONTROL S-OUT on your TV.

VMC-810S/820S (not supplied)

AUDIO-R (red) _

AUDIO-L (white)

VIDEO (yellow) VCR

(Rearof TV)

RK-G69HG (not supplied)

Connecting S-Link to a DBS

When you power on the DBS, S-Link will

automatically power on the TV and switch to

the correct video input.

1 Using A/V connectors, connect AUDIO

and VIDEO OUT on your DBS to AUDIO

and VIDEO IN on your TV.

2 Using an S-Link connector (mono mini

plug), connect S-LINK on your DBS to

S-LINK/CONTROL S-OUT on your TV.

Note

• If you have labeled one of your video inputs

as SKIP (see "VIDEO LABEL" on page 25)

and then connect video equipment to this

input using S-Link, the S-Link feature will

override the SKIP function.

I The S-Link connector must be in the same

WDEO-IN jacks as the A/V cables on your TV. J

DBS (Rear of TV)

' i a_--a_,_AUDIO-R (red) ,-

I_ 1 _ _tI--AUD'O-L(white)

| "NJ,._--WOEO(ye,low) ,,_

VMC-8105/820_ (not supplied) "=_6,_._

- !

RK-G69HG (not supplied)

Basic Set Up

Inserting batteries

Insert two size AA (R6) batteries (supplied) by

_atching the + and - on the batteries to the

diagram inside the battery compartment.

Notes

• Remove the batteries to avoid damage

from possible battery leakage whenever

you anticipate that the remote control will

not be used for an extended period.

* Handle the remote control with care.

Avoid dropping it, getting it wet, or

placing it in direct sunlight, near a heater,

or where the humidity is high.

• Your remote control can be programmed to

operate most video equipment. (see page 26)

Using the remote control

move & select buttons

The supplied remote control has "arrow"

buttons (tt, _,, 4,, +) which allow for

movement of the on-screen (_-) selector.

Pressing on the outer buttons will cause the

selector to move in the corresponding

direction. Pressing the center button (_)

will select the item.

Adjustment bars

When menu items present an adjustment bar

( _ or -,-*,-._), use the arrow buttons to

change the setting.

On-screen helplinstructions

Several menu windows will provide prompts

and instructions to assist you in navigating

through the different functions.

When presented, use these to supplement the

instructions in this manual.

Using Your New TV

Setting up the TV automatically

The Easy Setup Guide allows you to set the

on-screen language and set all receivable

channels in one step.

The AUTO PROGRAM function of the Easy

Setup Guide feature does nat apply for

installations that use a cable box for all channel

selection.

To set up the TV manually, refer to "Using the

SET UP menu" on page 24.

Tips "_"

• Performthisfunctionduringtheday, withthe

antenna and/or cable properly connected, to ensure

that all available channels will be broadcasting and

receivable.

• The TV must be set to the TV input to execute

AUTO PROGRAM. Press TV/VIDEO until a

channel number appears.

• If your cable or antenna is connected to AUX,

press ANT until AUX appears next to the channel

number,

Using the buttons on the top of the TV:

000088 0

SETt,P TV/_CrcO _ VGLL_JE+ - C_INEL + POlaR

Press POWER to turn on the "Fv'.

The Easy Setup Guide screen appears.

ESPA;;_: [CH-]

Atrro _r uP: (vc_-i

DE_: {WIVIDEO ]

Press CH + to select ENGLISH, CH - to

select ESPANOL or VOL + to select

FRAN_AIS.

The screen will change to reflect your

choice.

I ENGk_H: JCH+J

R_N_.AIS: [ VI_÷]

OE_: [W/VIDEO ]

_ [S_ UPI

For a DEMO of functions and menus,

press TV/VIDEO.

3 Press VOL - to continue.

_-_ I AUTO PROGRAM

AUTO PROGRAM appears and the TV

starts scanning and presetting channels

automatically. If the TV receives cable

channels, CABLE is set to ON automatically.

To perform AUTO SET UP again

Press the SET UP button on the TV and follow

steps 2-3.

Notes

• Before you perform Easy Setup Guide again,

make sure that the input from ANT (not AUX)

is selected by pressing ANT until "AUX" does

not appear next to the channel number.

• When you perform AUTO PROGRAM, your

CHANNEL FIX,TIMER, and CHANNEL

BLOCK settings will be erased.

• To reset your TV to factory settings, turn the

TV on. Then; while pressing the RESETbutton

on your remote control, press the POWER key

on your TV. The TV will turn itself off, then

back on.

Watching the TV

_1I of the TV features can be accessed via the remote

:0ntrol. The following chart will explain the function

_fthe buttons found on your remote control.

REFERTO THE

ILLUSTRATION OF THE

REMOTE CONTROL ON THE

INSIDE FRONT COVER OF

THIS MANUAL AS YOU

REVIEW THIS CHART

POWER

-- FUNCTION --

__TP'4)YD OS,SIGABLE &

®-®

and ENTER

JUMP

MUTING

Press when you want to turn equipment on and off.

Press when you want to control connected components with your remote control. (see

pages 26-28 for instructions on programming your remote control)

Use for direct channel selection. Press 0-9 to select a channel, the channel will

change after 2 seconds, or you can press ENTER for immediate selection.

Press to scan through the channels.

Keeping the OH + or - pressed allows you to rapidly scan to the desired channel

Press to alternate or jump back and forth between two channels. You can jump

between the last two channels selected with the 0-9 keys.

Press to mute the sound (MUTING will appear on the screen). Press again or press

VOL + to restore sound.

Press repeatedly until the TV displays the approximate time in minutes (30, 60, or 90)

SLEEP

that you want the TV to remain on before shutting off automatically.

Cancel by pressing until SLEEP OFF appears.

Using Your New TV (continued)

Using the White Labeled Buttons for TV Operations

D_SPLAY

TVNIDEO

ANT

(AUX input)

TMNTR

+©

MTS

GUIDE

SYSTEM

OFF

C_D

TV DBS

Press repeatedly to cycle through available displays:

Status

Channel number, current time, channel caption (if set) are displayed.

CAPTION VISION/XDS

Closed Captioning or XDS will be displayed if the broadcaster offers this service.

(see right)

To cancel the display, press DISPLAY until DISPLAY OFF appears•

Press repeatedly to cycle through available video inputs:

TV, VIDEO 1, VIDEO 2, VIDEO 3 and VIDEO 4

Press to change the VHF/UHF input to the AUX input.

(For detailed connection information, see "Gable and antenna" or "Cable box and cable"

on pages 3-4.)

Press to change between VIDEO and TV mode.

Press when you are finished using a VCR and you want to switch to the "IV input. Your

VCR power will remain on.

Press this button to cycle through the Multi-channel TV Sound (MTS) options:

STEREO, SAP, MONO (see page 22)

GUIDE is a feature of DBS, refer to your DBS operation instructions.

The SYSTEM OFF button allows you to power off all Sony equipment at once.

Press to turn ON or OFF one of the following audio effects:

SIMULATED: Adds a surround-like effect to mono programs.

SRS: Produces a dynamic three dimensional sound for stereo signals.

AUTO SRS: Automatically detects whether a stereo or mono signal is being received

and switches the TV effect between SRS and SIMULATED.

OFF: Normal stereo or mono reception.

TV/DBS is a feature of DBS, refer to your DBS operating instructions.

I _OAPTION VISION

CAPTION VISION _3

(Closed Caption)

I_ TEXT1

TEXT2

TEXT3

TEXT4

XDS

_MENU

IMove_ SelectG_ Exit_

CAPTION VISION can be used for programs

that are broadcast with closed caption.

To access CAPTION VISION:

1 Press MENU.

2 Press i to scroll to i*_-_,then press (_).

3 Choose a CAPTION VISION option.

4 Access CAPTION VISION through your

DISPLAY button. (see left)

CC1, 2, 3 or 4

Shows you a printed version of the dialog or

sound effects of a program. (The mode should

be set to CO1 for most programs)

TEXT1, 2, 3 or 4

Shows you network/station information

presented using either half or the whole screen.

XDS (Extended Data Service)

Shows a network name, program name,

program length, and time of the show if the

broadcaster offers this service.

Note

• Poor reception of TV programs can cause

errors in CAPTION VISION and XDS.

Captions may appear with a white box or

other errors instead of intended text.

_/atching two programs at

one time - PIP

Thesemodels are equipped with dual tuners.

Fhis means that PIP is "ready to use".

The sound of the main

picture is receded /

Main _ 'd_ 6/ J

Main picture

channel or input-

source mode

Window picture

channel or input-

source mode

-- Window

picture

Notes

• You must press TV (FUNCTION) before

you can control PIP with the yellow labeled

buttons.

• The AUX input cannot be viewed in the

window picture.

REFER TO THE ILLUSTRATION OF

THE REMOTE CONTROL ON THE

INSIDE FRONT COVER OF THIS

MANUAL AS YOU REVIEW THIS

CHART

,, .... the Yellow Labeled ,Buttons for PiP Operations .;_!_

PIP Press once to display the window picture (1/9 size).

(_ Press again to reduce the size of the window picture (1/16 size).

Press a third time to turn off the window picture.

TVNIDEO Press repeatedly to cycle through available video inputs:

(_ TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4

AUDIO Press to alternate sound between the main picture and the window picture.

(_) A _ will appear to indicate which picture is receiving sound.

TV/VTR

(_ Press to change the channel in the window picture.

POSITION Press to move the location of the window picture (counterclockwise) around the

(_ main picture.

Page is loading ...

Sony KV-32FV1 User manual

Brand: Sony

Model: KV-32FV1

Category: CRT TVs

Type: User manual

This manual is also suitable for

KV-36FV1

Download PDF

report

Sony KV-32FV1 User manual

This manual is also suitable for

Sony KV-32FV1 User manual

Related papers

Other documents