*Place 2-3 drops of glue in holes before
inserting dowels. Attach Front Cross
Braces together with false front blocks
Right Panel
*Place 2-3 drops of glue in side
panel holes before attaching Cross
Braces, Toe Kick, Cabinet Bottom
and Back Panel
Left Panel
Assembly Instructions
Sink 2 Door
Wood
Dowel
Cam-Lock
Screw
Cam-Lock
Nut ¾” Screw Bumpers 2 Piece
Hinge X 4
Back Panel
1 2
3 4
Tools needed but not provided:
Wood Glue
½” Screw
*Do not put glue directly on the dowel
*Place 2-3 drops of glue in the hole
before inserting each dowel
X 4
* Insert dowels
after glue drops
Front Cross
Brace X 2
Back Cross
Brace
4 ½” Toe Kick
Phillips
Screwdriver
*Do not Fully tighten ½”
hinge screws until step 8
X 14
Cabinet
Bottom Left
Panel
Right
Panel
*Push all the way in until less
than 3/8” of dowel is exposed
Left Panel
Right Panel Cabinet Bottom
Door X 2
C A B I N E T S
B y M o d e r n C l a s s i c
X 14
*Screw in Cam-Lock Screw until
threads are no longer visible
False Front
Block X 2
1 1/8”
False Front
Screw X 2
X 28
Screw to mount false front
with 1 1/8” false front screws
5 6
8 9 7
X 14
Tighten all
Cams
Back Panel
4-1/2” Toe Kick
Front Cross Brace
Front Cross Br
Back Cross Brace
Cabinet
Bottom
X 2 Doors
Hinge Adjustment as Needed For Door Alignment
(In/Out)
Side-Side Up-Down Front-Back
10
Center False Front above doors 1/8” down
from top and 1/8” in on each side.
/
