OTC 314729 Operating instructions

Hello! I've reviewed the provided document, which is a Parts List & Operating Instructions for the OTC Transmission Adapter 314729. This adapter is designed for Allison 500 and 600 Series Transmissions. The document details assembly instructions, a list of included parts, and important safety precautions. It also specifies the use of a front and back support bracket, strap assembly, and standard fasteners. I'm ready to answer any questions you may have about this product.
What are the main components of the transmission adapter?

What should I do before assembling the adapter?

Which transmissions are compatible with this adapter?

Sheet No. 1 of 1

Issue Date: Rev. B, August 8, 2014

Allison Transmission Adapter

Application: Allison 500 and 600 Series Transmissions

Safety Precautions

Caution: To help prevent personal injury and damage to equipment,

•• Read, understand, and follow all safety precautions and operating instructions.

•• Wear eye protection that meets the requirements of ANSI Z87.1 and OSHA.

•• Do not modify the transmission adapters unless approved or supplied by OTC.

•• Do not exceed the maximum capacity of the jack used with the adapters.

This guide cannot cover every situation, so always do the job with safety ﬁ rst.

Assembly Instructions

(Item numbers refer to the parts list.)

1. Use fasteners (Item Nos. 4 & 5) to loosely assemble the transmission support brackets (Nos. 1 & 2) to the

mounting plate.

2. Adjust the brackets to ﬁ t the transmission pan when the load is centered on the jack.

3. Tighten the fasteners assembled in Step 1.

4. Secure the strap assembly (No. 2) around the component. Attach the hooks on the end of the strap to the

angled slots provided on the support bracket (No. 1), or other suitable location on the platform.

123

4, 5

Item Part

No. No. Qty. Description

1 314733 1 Front Support Bracket

2 306422 1 Strap Assembly

3 314730 1 Back Support Bracket

4 12004 3 Washer (for 1/2" bolt)

5 10079 3 Hex Hd. Cap Screw

Form No. 106342

Parts List &

Operating Instructions

for: 314729

655 Eisenhower Drive

Owatonna, MN 55060 USA

Phone: (507) 455-7000

Tech. Serv.: (800) 533-6127

Fax: (800) 955-8329

Order Entry: (800) 533-6127

Fax: (800) 283-8665

International Sales: (507) 455-7223

Fax: (507) 455-7063

Website: www.otctools.com