Home Decorators Collection WSFP42ECHD-30 Operating instructions

THANK YOU

We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this fireplace

console. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of

products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

Model # WSFP42ECHD-28

# WSFP42ECHD-29

# WSFP42ECHD-30

OMSID # 301353160

OMSID # 301353179

OMSID # 301538219

ASSEMBLY INSTRUCTIONS

Coloreidge 42 in. Mantel Console with Infrared Electric Fireplace

Questions, problems, missing parts? Before returning to the store,

call Home Decorators Collection Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday

9 a.m. - 6 p.m., EST, Saturday

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

2

Table of Contents

Table of Contents .......................................................... 2

Safety Information ......................................................... 2

Warranty ......................................................................... 2

Pre-Assembly ................................................................ 2

Planning Assembly ..................................................... 2

Tools required ............................................................ 2

Hardware Included ..................................................... 3

Package Contents ...................................................... 4

Assembly ....................................................................... 5

Care and Maintenance ................................................ 18

Safety Information

Please read and understand these instructions before

assembling and using this console. Save these

instructions for future reference.

MAXIMUM RECOMMENDED WEIGHT

LOADS

WARNING: This unit is not intended for use with CRT

TVs. Use only with flat panel TVs and audio/video

equipment meeting recommended size and weight

limits. Never use with larger/heavier than recommended

flat panel TVs or equipment. To avoid instability, place

flat panel TV in the centre of the unit; the base of the

television must be able to rest on the supporting

surface of the unit without over-hanging the edges.

Improperly positioned flat panel TVs, or flat panel TVs or

other equipment that exceed recommended size and

weight limits could fall off or break the unit, causing

possible serious injury.

Warranty

We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or

materials, or fail under normal use, we will repair or replace it for a period of up to one (1) year from date of purchase.

This warranty gives you specific rights and you may also have other rights which vary from state to state.

Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.

Pre-Assembly

PLANNING ASSEMBLY

Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not

assemble this product and contact the Customer Service Team at 1-800-986-3460.

TOOLS REQUIRED

Phillips

screwdriver

(not provided)

Maximum load 6.8 kg / 15

lb MAXIMUM LOAD 50 LB (22.7 kg)

Maximum load 22.6 kg / 50 lb MAXIMUM LOAD 50 LB (22.7 kg)

Place TV behind the

stopper

Fits up to most 127 cm / 50 in. flat panel TVs

Maximum load 61.2 kg / 135 lb

3 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Pre-Assembly (continued)

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part

Description

Quantity

Part

Description

Quantity

AA

Cam lock

46 + 2 extra

LL

L-shaped metal brace

2

BB

Cam bolt

46 + 2 extra

MM

Push magnetic catch

2

CC

Wood dowel

50 + 2 extra

NN

Tipping restraint hardware kit

2

DD

Long wood screw

16 + 1 extra

OO

Hook

2

EE

Short wood screw

20 + 1 extra

PP

Left bottom / right upper pivot hinge

2

FF

Washer head screw

16 + 1 extra

QQ

Right bottom / left upper pivot hinge

2

GG

Long pan head screw

8 + 1 extra

RR

Acrylic stopper

1

HH

Short pan head screw

2 + 1 extra

SS

Knob

1

II

Cam lock cover

20 + 1 extra

TT

Knob bolt

1

JJ

Shelf support

8 + 1 extra

UU

Glue

1

KK

Straight metal plate

4

VV

Touch-up pen

1

MM MAXIMUM LOAD 50 LB (22.7 kg)

LL MAXIMUM LOAD 50 LB (22.7 kg)

NN MAXIMUM LOAD 50 LB (22.7 kg)

OO MAXIMUM LOAD 50 LB (22.7 kg)

PP MAXIMUM LOAD 50 LB (22.7 kg)

QQ MAXIMUM LOAD 50 LB (22.7 kg)

RR MAXIMUM LOAD 50 LB (22.7 kg)

SS MAXIMUM LOAD 50 LB (22.7 kg)

VV MAXIMUM LOAD 50 LB (22.7 kg)

UU MAXIMUM LOAD 50 LB (22.7 kg)

TT MAXIMUM LOAD 50 LB (22.7 kg)

AA MAXIMUM LOAD 50 LB (22.7 kg)

BB MAXIMUM LOAD 50 LB (22.7 kg)

CC MAXIMUM LOAD 50 LB (22.7 kg)

DD MAXIMUM LOAD 50 LB (22.7 kg)

EE MAXIMUM LOAD 50 LB (22.7 kg)

FF MAXIMUM LOAD 50 LB (22.7 kg)

GG MAXIMUM LOAD 50 LB (22.7 kg)

HH MAXIMUM LOAD 50 LB (22.7 kg)

II MAXIMUM LOAD 50 LB (22.7 kg)

JJ MAXIMUM LOAD 50 LB (22.7 kg)

KK MAXIMUM LOAD 50 LB (22.7 kg)

4

Pre-Assembly (continued)

PACKAGE CONTENTS

Part

Description

Quantit

y

Part

Description

Quantit

y

A

Top panel

1

L

Right lower side panel

1

B

Back panel

1

M

Barrister door

1

C

Center shelf

1

N

Center crossbar

2

D

Base

1

O

Left Upper front molding

1

E

Left upper side panel

1

P

Right Upper front molding

1

F

Barrister door left support

1

Q

Support

2

G

Barrister door right support

1

R

Adjustable shelf

2

H

Right upper side panel

1

S

Left door

1

I

Lower back panel

2

T

Right door

1

J

Lower front panel

2

Fireplace insert

1

K

Left lower side panel

1

Remote control with battery

1

A

B

C

D

E F

G

H

I J K L

M N R

O

P

Q

S

T

5 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly

1

Screwing the cam bolts

NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all

bolts. This will make the assembly easier.

□ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted

floor or the empty carton to avoid any scratches.

□ Securely screw the cam bolts (BB) into the designated small holes on the top panel (A), the base (D), the lower

front panels (J) and the upper front moldings (O and P) using a Phillips screwdriver.

2

Attaching the cam bolts and push magnetic

catches

□ Securely screw the cam bolts (BB) into the designated small holes on the center shelf (C) using a Phillips

screwdriver.

□ Using the pilot holes as a guide, fasten two push magnetic catches (MM) to the center shelf (C) with eight long

pan head screws (GG). Make sure that the magnet faces outward.

BB

A

D

O

P

J

X2

BB

MM

GG

C

6

Assembly (continued)

3

Combining the upper moldings and side panels

NOTE: Refer to the dowel and cam lock assembling guide drawings in this step for further clarification on how to properly

glue in the wooden dowels and install cam locks. Apply this method whenever instructed to install wood dowels and cam

locks.

□ Glue one wood dowel (CC) into the inner hole of the left upper side panel (E) and attach it to the left upper front

molding (O) by engaging two cam locks (AA) as shown.

□ Repeat the same procedure to combine the right upper front molding (P) and the right upper side panel (H)

together.

4

Installing the upper side panel assemblies

□ Glue six wood dowels (CC) into the inner holes drilled on the top edge of upper side panel assemblies and attach

them to the top panel (A) by engaging four cam locks (AA).

GLUE

X

FINAL

1 2 43

AA

H

E

A

CC

E

O

H

P

CC

AA

7 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

5

Attaching the barrister door supports

□ Glue four wood dowels (CC) into the inner holes on the upper edge of the barrister door supports (F and G) and

attach them to the top panel (A) by engaging four cam locks (AA).

6

Securing the barrister door supports

□ Fasten the barrister door supports (F and G) to the back stretcher of the top panel (A) with two long wood screws

(DD).

DD

O

P

F

G

A

F

G

A

E

H

CC

AA

8

Assembly (continued)

7

Installing the center crossbar and the center shelf

□ Align and attach the center crossbar (N) to the center shelf (C) with two wood dowels (CC) and three cam locks

(AA).

□ Glue six wood dowels (CC) into the inner holes at the bottom edge of the upper side panels (E and H) and front

moldings.

□ Properly position the center shelf (C) onto the inserted wood dowels (CC) and secure in place by engaging six

long wood screws (DD).

8

Combining the lower panels

□ Glue two wood dowels (CC) into the inner holes of left lower side panel (K) and attach it to one lower front panel

(J) by engaging two cam locks (AA) as shown.

□ Repeat the same procedure to combine the right lower side panel (L) and the other lower front panel (J) together.

J

K

L

J

CC

AA

C

N

AA

CC

DD

E

CC

H

C

9 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

9

Attaching the lower back panels

□ Align and attach lower back panels (I) to the lower side panels (K and L) with two wood dowels (CC) and two long

wood screws (DD) per panel.

10

Installing the lower side panel assemblies

□ Glue eight wood dowels (CC) into the top inner holes of both lower side panel assemblies.

□ Align the large holes on the center shelf (C) with the inserted wood dowels (CC) and press them together. Secure

the lower side panel assemblies in place by engaging twelve cam locks (AA).

CC

J

K

L

I

DD

C

K

I

J

I

L

J

10

Assembly (continued)

11

Attaching the center crossbar

□ Align and attach the remaining center crossbar (N) to the base (D) with two wood dowels (CC) and three cam

locks (AA).

12

Installing the supports

□ Align and attach the supports (Q) to the base (D) with two wood dowels (CC) and two cam locks (AA) in each, as

shown.

Q

AA

CC

D

Q

N

AA

CC

D

11 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

13

Installing the base assembly

□ Align and attach the base assembly to the lower side panel assemblies with eight wood dowels (CC) and eight

cam locks (AA).

14

Securing the base

□ Insert four long wood screws (DD) through the drilled holes on the base (D) and securely screw into the lower

side panels (K and L).

CC

I

K

J

L

I

D

I

K

J

L

I

DD

D

12

Assembly (continued)

15

Installing the metal plate

□ Flip the assembled unit around at its front edges. Secure the middle crossbars (N) to both lower front panels (J)

by attaching four metal plates (KK) at the joints, using two short wood screws (EE) in each, as shown.

16

Attaching the back panel

□ Pick up the back panel (B) and align the drilled holes against the upper long edge with the pilot holes on the back

stretcher of the top panel (A). Attach the back panel (B) in place using the provided washer head screws (FF).

KK

EE

J

N

FF

A

H

B

D

13 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

17

Attaching the bottom pivot hinges

□ Using the pilot holes as a guide, attach the left bottom pivot hinge (PP) to the left door (S) with two short wood

screws (EE) as shown. Make sure that the pivot pin runs against the edge.

□ Repeat the same procedure to attach the right bottom pivot hinge (QQ) to the right door (T).

18

Installing the left door

□ Stand the assembled unit upright.

□ Tilt and insert the pivot pin under the left door (S) into the plastic bushing pre-attached on the base (D).

□ Attach the left upper pivot hinge (QQ) to the plastic bushing pre-attached on the center shelf (C) as shown. Make

sure that the pivot hinge mounting plate will face inward.

□ Fit the left door (S) to the inserted pivot hinge (QQ) making sure the mounting holes overlap the pilot holes on the

door panel. Secure the left upper pivot hinge (QQ) to the left door (S) with two short wood screws (EE). Open and

close the door to make sure it is aligned and shut correctly. If necessary, adjust the screws for a good fit.

S

PP

EE

QQ

EE

T

QQ

S

QQ

EE

S

14

Assembly (continued)

19

Installing the right door

□ Repeat the same procedure with the right door (T).

20

Installing the adjustable shelves and cam lock covers

□ Open the doors and insert four shelf supports (JJ) into the desired holes inside each side compartment. Make

sure you place the four shelf supports in the same level so the shelf is not tilted. Rest the adjustable shelves (R)

onto the shelf supports (JJ).

□ Plug the cam lock covers (II) onto the visible cam locks to conceal the cams.

R

N

J

L

JJ

R

JJ

II

PP

T

PP

EE

T

15 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

21

Installing the hooks and knob

□ Using the pilot holes as a guide, fasten two hooks (OO) to the upper corners of the barrister door (M) with four

short wood screws (EE).

□ Attach one knob (SS) to the front side of the barrister door (M) with the knob bolt (TT).

22

Installing the barrister door

□ Hook the barrister door (M) onto the pre-attached plastic slides on the barrister door supports (F and G) and tuck

it underneath the top panel (A) in one smooth motion.

M

TT

SS

OO

EE

OO

EE

M

16

Assembly (continued)

23

Installing the fireplace insert

□ Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO NOT

drag the insert across the bottom panel (D) as it may scratch the unit.

24

Attaching the L-shaped metal braces

□ Using the pilot holes as a guide, align and attach two L-shaped metal braces (LL) to the supports (Q) by screwing

two short pan head screws (HH).

Q

Electric

Firebox

HH

LL

Q

17 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

25

Installing the acrylic stopper

□ Remove the paper backing of acrylic stopper (RR), then properly align the acrylic stopper into the cut-out on the

acrylic stopper template on the front of the top panel (A). Press down on the acrylic stopper to help adhesion.

□ At the back of the top panel (A), carefully pull out the thumb tacks to remove the acrylic stopper template.

NOTE: You must install the acrylic TV stopper to prevent TV from tipping when placing your flat panel television

on the top panel.

26

Installing the tipping restraint

hardware

WARNING: Young children can be seriously injured by tipping furniture. You must install the tipping restraint hardware

with the unit to prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended only

as a deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not earthquake restraints.

If you wish to add the extra security of earthquake restraints, they must be purchased and installed separately.

□ With assistance, position the assembled fireplace at the desired location against a wall. In case of uneven floor,

floor levelers are provided at the bottom of the mantel. If necessary, adjust the floor levelers by hand to correct

tilting, until the unit is level.

□ Follow the instructions printed on the plastic bag containing the tipping hardware to attach the tip-over restraint to

the unit and the wall.

□ Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace insert to

control your fireplace.

Electric

Firebox

18

Care and Maintenance

A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping.

To clean and care for your furniture:

□ Use a soft, clean cloth that will not scratch the surface when dusting.

□ Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area.

□ Using solvents of any kind on your furniture may damage the finish.

□ Never use water to clean your furniture as it may cause damage to the finish.

□ Always use coasters under beverage glasses and flowerpots.

□ Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.

□ Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create

spotting within the furniture finish.

□ Stains or marks from crayons or ink markers will be difficult to remove.

□ In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a

professional to repair your furniture.

□ Check bolts/screws periodically and tighten them if necessary.

CARING FOR WOOD FURNITURE

It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can

cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may

damage the finish.

Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will

enhance your furniture as it ages.

CLEANING THE FIREPLACE TRIM

Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth. DO

NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products can

be obtained at supermarkets or hardware stores.

Questions, problems, missing parts? Before returning to the store,

call Home Decorators Collection Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday

9 a.m. - 6 p.m., EST, Saturday

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

Retain this manual for future use.

Home Decorators Collection WSFP42ECHD-30 Operating instructions

This manual is also suitable for

Home Decorators Collection WSFP42ECHD-30 Operating instructions

Related papers

Other documents