Litton Lane 62681 Operating instructions

Type
Operating instructions
Pre-Assembly:
Remove parts and hardware from box and lay out on a carpeted or scratch-free work surface.
Do not dispose of any contents until assembly is complete.
Save all packing materials until assembly is complete.
Use the parts and hardware provided. No additional materials are necessary for assembly.
Do not fully tighten all bolts until all parts are in place. Tightening before all parts are assembled
may cause the bolts to misalign during assembly.
If using power tools to aid in assembly, please use caution. Power tools can damage hardware or
split wood.
Assembly instructions:
Attach shelves to left and right side panels using pre-drilled holes and hardware provided
Tools needed:
Phillips screwdriver
Allen key (provided)
Position the side panel perpendicular to either of the shelves.
Align the pre-drilled holes on the side panel with the pre-drilled holes on the shelf.
Insert the hardware through the pre-drilled holes
Tighten lightly
Repeat for all shelves
Tighten hardware until snug. Do not over-tighten.
Care instructions:
Wipe clean using a damp cloth and a mild cleaner
Wipe dry with a clean cloth.
Warranty:
30 days against manufacturing defects
  • Page 1 1

Litton Lane 62681 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI