Tatung KDRC-48 Operating instructions

Brand: Tatung

Model: KDRC-48

Type: Operating instructions

COMPONENTS

HARDWARE

A

cam bolt x 12

B

cam x 12

C

cap x 12

D

screw x 16

E

tool x 1

F

wood dowel x 4

STEP 1

A

cam bolt

1

2

4

5

5

F

wood dowel

STEP 2

TATUNG UTILITY CENTER CABINET

ASSEMBLY INSTRUCTION

MODEL: KDRC-48

G

G

glue x 1

Securely screw cam bolt (A) into

left panel (1) and right panel (2).

Apply glue (G) on holes for wood dowel

and insert wood dowel (F) into part (5).

Attach part (5) to top shelf (4).

glue

1

2

3

4

6

5

STEP 5

STEP 6

STEP 3

STEP 4

4

6

2

2

4

6

1

cam

B

C

cap

STEP 7

D

screw

3

E

tool

Apply glue (G) on hole for wood dowel.

Attach top shelf (4), bottom shelf (6) and

part (5) onto right panel (2) by aligning

each cam bolt and wood dowel to its

corresponding hole.

Apply glue (G) on hole for wood dowel. Attach

left panel (1) onto bottom shelf (6), top shelf (4)

and part (5) by aligning each cam bolt and wood

dowel to its corresponding hole.

Insert cam (B) into hole in top shelf (4) and

bottom shelf (6) with notch of cam facing head

of cam bolt (A). Tighten cam (B) approximately

1/2 turn clockwise until snug by using tool E.

Press cap (C) into cam(B).

NOTE:

Using an optional 5/16" slotted screwdriver has

the best result to turn the cam (B).

Turn partially assembled cabinet to standing

position. Attach back panel (3) by tightening

screw (D) into the pre-drilled holes.

5

5

Carefully place a refrigerator into the assembled

cabinet.

6

4

G

G

1
2

Tatung KDRC-48 Operating instructions

Brand: Tatung

Model: KDRC-48

Type: Operating instructions

Download PDF

Other documents