Instructions for use
F
E
GB
CZ
DIGITAL TERRESTRIAL RECEIVERDIGITAL TERRESTRIAL RECEIVER
REV. 1.0MD68-00296A
Consignes d’utilisation . . . . . . . . F
Instrucciones de uso . . . . . . . . . . E
Instructions for use . . . . . . . . . . . GB
Pokyny pro pouÏívání. . . . . . . . . . CZ
DTB-B460F / DTB-B360F
MD68-00296A_Cover 4/27/06 5:42 PM Page 1
Page is loading ...
Page is loading ...
Page is loading ...
Mise en route
Mise en route
TABLE DES MATIERES
F-5
F
Mise en route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Mesures de sécurité. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Fonctions générales. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connexion du STB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Panneau avant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Panneau arrière . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Télécommande . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Fonctions de base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Fonctionnement du récepteur. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Menu principal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
1. Guide électronique de programme (EPG) . . . . . . . . . . . . . . . . . . 17
2. Chaînes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.1 Balayage auto. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.2 Balayage manuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.3 Liste des canaux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.4 Canaux favoris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.5 Contrôle parental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. Préférence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4. Système . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.1 Informations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.2 Réinitialisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.3 Modification du code PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.4 Langue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.5 M. à jour logiciel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Référence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Dépannage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Mise au rebut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Caractéristiques techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
F-4
RECEPTEUR TERRESTRE NUMERIQUE
FONCTIONS GENERALES
1. SECTION UTILISATEUR
500 CANAUX PROGRAMMABLES
GUIDE ELECTRONIQUE DE PROGRAMME AVANCE
PRISE EN CHARGE DE PLUSIEURS LANGUES POUR L’OSD
PRISE EN CHARGE DE PLUSIEURS LANGUES POUR LE TELETEXTE
(VBI)
TELECOMMANDE INFRAROUGE MUNIE DE FONCTIONS COMPLETES
BALAYAGE AUTO ET MANUEL
ORGANISATION DES CANAUX (PROGRAMMABLE)
FAIBLE CONSOMMATION
MISE A JOUR AUTOMATIQUE DE L’EPG
PRISE EN CHARGE DU LCN (Numéro de canal local)
2. SECTION TUNER
TUNER A LARGE BANDE 50~860 MHz
SORTIE RF EN BOUCLE (MALE) POUR RECEPTEUR ANALOGIQUE
3. SECTION VIDEO
COMPATIBLE DVB-T
VIDEO MPEG-2 (MP@ML)
PRISE EN CHARGE DU RATIO D’ASPECT 4:3 (NORMAL) ET 16:9
(ECRAN LARGE)
FFT : 2 K OU 8 K
2SCART
SORTIE HDMI (pour le modèle DTB-B460F).
4. SECTION AUDIO
MPEG 1 AUDIO LAYER I & II
MODE MONO, DUAL, STEREO ET STEREO/AUDIO
FREQUENCES D’ECHANTILLONNAGE DE 32, 44,1 ET 48 KHz
CONTROLE DU VOLUME ET MODE MUET VIA LA TELECOMMANDE
SORTIE AUDIO NUMERIQUE SPDIF
MD68-00296A_F 4/27/06 4:50 PM Page 4
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
RECEPTOR TERRESTRE DIGITAL
DTB-B460F / DTB-B360F
Instrucciones de uso
E
MD68-00296A_E 4/27/06 5:27 PM Page II
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
DIGITAL TERRESTRIAL RECEIVER
DTB-B460F / DTB-B360F
Instructions for use
GB
MD68-00296A_GB 4/27/06 2:11 PM Page II
Getting Start
GB-3
GB
WARNING!
1. Follow these directions in order not to damage the power cord or plug.
Do not modify or process the power cord or plug arbitrarily.
Do not bend or twist the power cord too much.
Make sure to disconnect the power cord with holding the plug.
Separate heat appliances from the power cord as distance as possible in order to
prevent the cover from being melted.
2. Failure to follow one of them may cause electrical shock.
Do not open the main body.
Do not insert metals or inflammable objects inside the product.
Do not touch the power plug with a wet hand.
Disconnect the power cord in case of lightning.
Do not cover the receiver’s ventilation openings with items such as newspapers,
clothes etc.
Do not place the receiver on top of household appliances that emit heat.
3. Do not use the product when it is out of order. If you continue to use
the product with a defect, it can cause a serious damage to the product.
Make sure to contact your local product distributor when the product is
out of order.
SAFETY INSTRUCTIONS
GB-2
This STB has been manufactured to satisfy international safety standards.
Please read the following recommended safety precautions carefully.
MAINS SUPPLY: AC 230V~, 50/60Hz
OVERLOADING: Do not overload wall outlets, extension cords or adapters
as this can result in fire or electrical shock.
LIQUIDS: Keep liquids away from the STB.
CLEANING: Before cleaning, disconnect the STB from the wall socket.
Use a cloth lightly dampened with water (no solvents) to
clean the exterior.
VENTILATION: Do not block the STB ventilation holes. Ensure that free airflow
is maintained around the STB. Never store the STB where it is
exposed to direct sunlight or near heating equipment e.g. a radiator.
Never stack other electronic equipment on top of the STB.
Place the STB at least 30mm from the wall.
ATTACHMENTS: Do not use any attachment that is not recommended by the
manufacturer; it may cause a hazard or damage the equipment.
CONNECTION TO THE CABLE TV SIGNAL AND TV:
Connect all components before plugging any power cords into the
wall outlet. Always turn off the STB, TV and other components before
you connect or disconnect any cables.
SERVICING: Do not attempt to service this product yourself.
Any attempt to do so will make the warranty invalid.
Refer all servicing to a qualified service agent.
LIGHTNING: If the STB is installed in an area subject to intense lightning
activity, protection devices for the STB mains connector and
modem telephone line are essential.
The individual manufacturer’s instruction for safeguarding other
equipment, such as TV set, Hi-Fi, etc., connected to the STB
must also be followed during lightning storms.
GROUNDING: Terrestrial cable MUST BE EARTHED.
The grounding system must comply with SABS 061.
Getting Start
SAFETY INSTRUCTIONS
DIGITAL TERRESTRIAL RECEIVER
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm
to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
MD68-00296A_GB 4/27/06 2:11 PM Page IV
Getting Start
Getting Start
CONTENTS
GB-5
GB
Getting Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting Your STB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Basic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Operating The Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
1. EPG-Electronic Program Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.1 Auto Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.2 Manual Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.3 Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.4 Favorite Channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.5 Parental Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. Preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4. System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.1 Product Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.2 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.3 Change PIN Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.4 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.5 Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
GB-4
Digital Terrestrial Receiver
GENERAL FEATURES
1. USER SECTION
500 PROGRAMMABLE CHANNELS
ADVANCED ELECTRONIC PROGRAM GUIDE
MULTI LANGUAGE SUPPORTED FOR OSD
TELETEXT (VBI) SUPPORTED WITH MULTI LANGUAGE
FULL FUNCTION INFRARED REMOTE CONTROL UNIT
AUTO AND MANUAL SCAN FACILITY
CHANNEL ORGANIZING (PROGRAMMABLE)
LOW POWER CONSUMPTION
AUTO UPDATED EPG
LCN (Local Channel Number) SUPPORTED
2. TUNER SECTION
50~860 MHz WIDE BAND TUNER
RF LOOP-THROUGH OUTPUT (MALE) FOR ANALOG RECEIVER
3. VIDEO SECTION
DVB-T COMPLIANT
MPEG-2 VIDEO (MP@ML)
SUPPORTS ASPECT RATIO 4:3 (NORMAL) AND
16:9 (WIDE SCREEN)
FFT: 2K OR 8K
2SCART
HDMI OUT (For model DTB-B460F)
4. AUDIO SECTION
MPEG 1 AUDIO LAYER I & II
MONO, DUAL, STEREO AND JOINT STEREO AUDIO MODE
32, 44.1, AND 48 KHz SAMPLING FREQUENCIES
VOLUME CONTROL AND MUTE FUNCTION THROUGH
REMOTE CONTROL UNIT
SPDIF DIGITAL AUDIO OUTPUT
MD68-00296A_GB 4/27/06 2:11 PM Page 4
Getting Start
Getting Start
GB-7
GB
GB-6
Digital Terrestrial Receiver
CONNECTING YOUR STB
1. LOCATION OF THE RECEIVER
Your RECEIVER should be placed under proper ventilation.
Don’t put in completely enclosed cabinet that will restrict the flow of air,
resulting in overheating.
The location should be safeguarded from direct sunlight, excess moisture,
rough handling or household pets.
Avoid stacking other electronic components on the top of the receiver.
The location should be safely accessible by the cable from your antenna system.
2. CONNECTING THE RECEIVER WITH AERIALS
You can connect the receiver to the following type of aerials:
Use a standard outdoor roof aerial intended for receiving channels between
VHF and UHF.
Because many older roof-mounted aerials may only receive a limited number of
channels, it is difficult or impossible to receive digital channels transmitted on higher
frequencies. If so, you may replace the roof aerial.
Some outdoor aerials are directed towards an analog transmitter.
The aerial must be directed towards a digital TV transmitter.
It is not desirable to use indoor or window mounted aerials, as it will be difficult or
impossible to receive digital channels.
3. CONNECTING THE RECEIVER TO TV
To connect the receiver with your television, you can use SCART Cable.
In the case of connecting your TV through SCART cable, connect the SCART connector
marked AV1(TV) to the respective SCART port on the TV.
4. CONNECTING YOUR VCR
To connect a VCR, the receiver has been provided with SCART at the rear marked
“AV2(EXT)”. Using a SCART connector, the VCR can be connected to the receiver.
5. CONNECTING YOUR ANALOG RECEIVER
This Receiver is compatible with analog signal, so don’t need any other extra connection
except Digital connection.
6. CONNECTING DIGITAL AUDIO SYSTEM
Connect a fiber optic cable between OPTICAL on the receiver and OPTICAL on the
Digital Audio System.
7. CONNECTING TO HDMI (High Definition Multimedia Interface)
(For model DTB-B460F)
Connect an HDMI cable between the HDMI OUT on your STB and the HDMI input jack
on the TV.
Connecting Figure
CONNECTING YOUR STB
NNoottee : In some region, the digital terrestrial signal may be weak.
So you’d better use the antenna in which the booster was built, for watching
the weak signal channels.
MD68-00296A_GB 4/27/06 2:11 PM Page 6
Getting Start
Getting Start
DESCRIPTION
GB-9
GB
GB-8
Digital Terrestrial Receiver
1. AC MAINS This is to plug in the AC mains power cord.
The input AC voltage range is 230V~, 50Hz/60Hz supply.
2. AV1 (TV) This is for connecting to your TV.
RGB format is supported.
3. AV2 (EXT) This is for connecting to your VCR or other equipment.
4. DIGITAL AUDIO OUT Output for connection to a digital amplifier.
5. HDMI OUT
This port is to connect to the HDMI input jack for device with
HDMI input. (For model DTB-B460F)
6. CABLE IN
This port is to connect the coaxial cable from your cable system.
7. LOOP To enable the connection of an Analog receiver.
The receiver is provided with this ‘
LOOP
’ port.
Rear PanelFront Panel
DESCRIPTION
1. /I This key is used to turn the receiver on and off (Standby).
1
2351 4 6 7
MD68-00296A_GB 4/27/06 2:11 PM Page 8
Getting Start
Getting Start
GB-11
GB
Digital Terrestrial Receiver
Remote Control Unit
GB-10
DESCRIPTION DESCRIPTION
1. STANDBY/ON Tur ns the STB on and off.
2. 0-9 Numeric key Press to enter numeric value and select the channel directly by entering
number on the service list.
3. FAV.CH
Displays the favorite channel lists.
4.
VOL+/VOL- Press
to
increase or decrease the volume.
5.
MENU Displays the main on-screen menu.
6.
Arrow Key Controls the cursor in the menu.
7.
OK Confirms a selection.
8. Color key (RED, GREEN, YELLOW, BLUE)
Used to select special operation for the STB.
9.
GUIDE Displays the on-screen Electronic Program Guide (EPG).
10. PG+/PG- Press to move up or down pages on Teletext mode.
11. TEXT Select the teletext mode.
12.
ALT Select the soundtrack list for the current service.
13. INFO
Press to display information for current program.
14.
TV/RADIO Toggle between the TV and Radio channel.
15.
PreCH Tur ns to the previous channel.
16.
(MUTE) This key is for toggling between normal & muted audio.
17. CH /CH
Press to change channels.
18.
RETURN Returns to the previous menu.
19.
TIMER
This function is not supported.
20.
SUBTITLE Press to change a subtitle language.
21.
AUDIO Press to select a Audio mode.
NNoottee : 1. When inserting batteries, make sure that the polarity(+/-) is correct.
2. This is a special remote control for the visually impaired, and has Braille
Points on the buttons.
MD68-00296A_GB 4/27/06 2:11 PM Page 10
Basic Functions
Basic Functions
GB-13
GB
Digital Terrestrial Receiver
BASIC FUNCTIONS
GB-12
1. Display Channel
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following
picture(banner) each time you switch channels:
● Press the INFO key in view mode.
● Select the channel by pressing Numeric (0~9) keys or
CH
/
CH
keys and press
TV/RADIO key to move to TV or Radio channel.
● When the INFO key is pressed in second time, detailed information for current program can be
displayed on another window.
● If program is supported, you can see following icon list.
Favorite Channel Icon
Scramble Channel Icon
Lock Channel Icon
Sound Track Icon
Subtitle Icon
Teletext Icon
TV channel Icon
Radio channel Icon
You will also see this picture each time you change channels.
When you press TV/RADIO key on the Remote Control Unit, TV and RADIO program are toggled.
Channel Number & Name
Time Information on Channel
DATE & TIME
Te le text IconFavorite Channel Icon Sound Track Icon
2. Volume Control
To control the volume level :
● Press the VOL+ or VOL- keys to adjust the volume level.
● Press the (MUTE) key to turn to silence mode.
● Press the (MUTE) key again or VOL+ or VOL- keys in order to cancel the mute function.
3. Select Soundtrack
● Press the ALT key to see the soundtrack list.
● Press the
/
and OK keys to select one.
● When watching TV through HDMI Out, AC 3 Audio
output is not supported.
4. Service List
● Press the OK key while you are viewing a program.
● Select list by pressing the TV/RADIO key.
● Select the channel by pressing the
/
keys for moving
up or down pages on the lists.
● Press the RED key to delete a channel from the
TV or Radio list.
● Press the OK key to watch that channel.
BASIC FUNCTIONS
MD68-00296A_GB 4/27/06 2:11 PM Page 12
Basic Functions
Basic Functions
GB-15
GB
GB-14
Digital Terrestrial Receiver
7. Selecting the Audio mode
Depending on the particular program being broadcast,
you can listen to stereo, mono, right, or left.
● Press the AUDIO key to see the Audio menu.
● Use the
/
keys to select a Audio menu.
Stereo: Select this to listen to the audio track in stereo.
Mono: Select this to listen to the audio track in mono.
Right: Select this to listen to the right audio track
through both speakers.
Left: Select to listen to the left audio track through
both speakers.
8. Changing the Teletext OSD
● When the current broadcasting program provides
Teletext OSD, press the TEXT key to see the current
Teletext OSD list.
● Use the
/
keys to select a Teletext OSD you want.
● Press the OK key and then the Teletext OSD you want is
displayed on the screen.
● When Teletext screen is displayed, press the
/
,
/
,
PG+
,
PG-
, or Numeric keys to go to desired
page.
Pressing
PG+
or
PG-
moves the page by 100 pages.
● Press the TEXT key to exit.
INFO key function in the Teletext screen
● Press the INFO key once: The background screen of Teletext becomes transparent and
displays the text.
● Press the INFO key twice: The background screen of Teletext becomes black and dose
not display the video but displays the text.
● Press the INFO key three times: The same screen as that when selecting the Teletext is
displayed.
BASIC FUNCTIONS
5. Setting the Favorite Channel
You can immediately register the present channel to the
favorite channel.
● Press the FAV key while you are viewing a program.
● To add the current channel to the Favorite channels,
press the BLUE key.
To delete a favorite channel from the Favorite channel
list, press the RED key.
To watch the favorite channel
● Press the FAV key and then select the channel by using
/
keys.
● Press the OK key to watch that channel.
6. Changing the Subtitle Language
When the current broadcasting program provides subtitle,
press the SUBTITLE key to see the current subtitle
language list.
If Subtitle is available on current program, is displayed
on information on channel.
● Press the SUBTITLE key to see the subtitle language
List.
● Use the
/
keys to select a subtitle language
you want.
● Press the OK key and then the subtitle language
you want is displayed.
To do text off, press the SUBTITLE key and select
‘01 off’. Then, press OK key.
BASIC FUNCTIONS
MD68-00296A_GB 4/27/06 2:11 PM Page 14
Operating The Receiver
GB-17
GB
Basic Functions
GB-16
Digital Terrestrial Receiver
9. Changing the Teletext VBI
● When the current broadcasting program provides
Teletext VBI, press the TEXT key twice to see the
current Teletext VBI list.
● This Teletext will be displayed to the screen by TV,
which supports Teletext.
● Use the
/
keys to select a Teletext VBI you want.
● Press the OK key and then the Teletext VBI you want is
displayed on the screen.
● When Teletext Screen is display, press the
/
or
Numeric keys to go to desired page.
● Press the TEXT key to exit.
BASIC FUNCTIONS
OPERATING THE RECEIVER
Main Menu
After installing your antenna system and STB with appropriate connectors.
● Plug in the AC main power and switch on the receiver.
● Press the MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed.
For the sub-menus Guide, Channel, Preference and
System.
1. EPG-Electronic Program Guide
The electronic program guide gives you a channel list for
the channels.
● Select “GUIDE” in the main menu, then press the
OK key.
GREEN key : Green key is for moving back to the
previous date.
YELLOW key : Yellow key is for moving to the next
coming date.
INFO key : INFO key can be used to see detailed
channel information.
● Press the
/
keys to select the desired channel, then press the OK key.
NNoottee : Quick way to access the GUIDE menu : Just press the GUIDE key while you are
viewing a program.
MD68-00296A_GB 4/27/06 2:11 PM Page 16
Operating The Receiver
GB-18
Operating The Receiver
GB-19
GB
Digital Terrestrial Receiver
2. Channel
This menu consists of 5 sub-menus:
Auto Scan, Manual Scan, Channel List, Favorite Channel
and Parental Guide.
● Select “Channel” in the main menu by using
/
keys.
● Place the cursor on this sub menu and press the
OK key.
If you have not entered your own PIN Code then the
PIN Code 0000 applies, which was set at the factory.
2.1 Auto Scan
This function allows you to download of the channels
automatically from the preprogrammed load.
● Press the OK key.
Auto Scan will be started.
All the channels in the list will be automatically
downloaded.
OPERATING THE RECEIVEROPERATING THE RECEIVER
2.2 Manual Scan
To tune-in new channels and weak signals, the STB has
been provided with the option “Manual Scan” where the
channel data can be entered by the user.
● Select the Channel Number.
You can select the specified channel you want to find.
The followings are defined as a default, but optionally you
can choose it.
Signal Status bar shows you if it is valid.
● Input the frequency of the channel you want to find.
● Select the bandwidth.
You can select the value of 6, 7 or 8 MHz.
● Press the OK key start scanning.
2.3 Channel List
This function is used to delete the channels.
● Select the channel you want to delete by using
/
keys.
● Press the RED key.
The message “Do you want to delete the selected
channel?” will appear.
If you delete the channel, select Yes.
● To move to TV or Radio channel, press the TV/RADIO
key repeatedly.
NNoottee : 1. If you want to watch the channel on channel list,
select the channel then press the OK key.
2. Quick way to access the channel list menu : Just press the OK key while you are
viewing a program.
MD68-00296A_GB 4/27/06 2:11 PM Page 18
Operating The Receiver
GB-21
GB
Operating The Receiver
GB-20
Digital Terrestrial Receiver
2.4 Favorite Channel
You can immediately register the present channel to the
favorite channel list.
● To add the current channel to the favorite channels,
press the BLUE key.
● To delete a favorite channel from the favorite channel list,
press the RED key.
● Press the OK key to watch that channel.
NNoottee : Quick way to access the Favorite channel menu :
Just press the FAV key while you are viewing a
program.
2.5 Parental Guide
This feature sets viewing restrictions and prevents
unauthorized access to your STB through the
PIN(Personal Identification Number), which is a 4 digit
number. (The factory preset PIN Code:0000)
On selecting this menu, you can set lock for any
desired channel.
● Enter PIN Code. If you have not entered your own
PIN Code then the PIN Code 0000 applies, which was
set at the factory.
OPERATING THE RECEIVEROPERATING THE RECEIVER
3. Preference
This option enables you to change preset setting such as
Aspect Ratio, TV setting as per your requirement.
You can set the various preference settings you want.
● Place the cursor on this sub menu and press OK key.
● Select the TV Aspect Ratio : STANDARD 4:3 ratio or
WIDE SCREEN 16:9 ratio type.
● Select the Aspect Ratio : Letter Box or Pan Scan.
(This is available function when it is standard 4:3 to
TV Aspect ratio)
MD68-00296A_GB 4/27/06 2:11 PM Page 20
Operating The Receiver
GB-23
GB
Operating The Receiver
GB-22
Digital Terrestrial Receiver
● Select the TV setting : Composite or RGB.
You can select the Video signal type.
● Select the Antenna 5V : On or Off
Select Active Antenna Power
Use the
/
keys to select On or Off, then press the
OK key.
On : Active antenna power is supplied through the
ANT in terminal to boost up RF signal gain.
Off : Active antenna power is not supplied.
● Select the HDMI (High Definition Multimedia Interface)
Resolution : 576p, 720p, or 1080i.
(For model DTB-B460F)
NNoottee : When you connect an HDMI cable between the
HDMI OUT jack on your STB and the HDMI input
jack on the TV, the HDMI Resolution menu
appears.
OPERATING THE RECEIVER OPERATING THE RECEIVER
Resolution and interlacing
Two of the elements that determine the quality of a TV picture are resolution and interlacing.
● Resolution : For TV equipment and broadcasts, resolution is defined by the number of
horizontal lines displayed to make up each frame of a video image.
The more lines of resolution used to draw each frame of video, the more detailed
and sharp the picture will be. Standard TV resolution uses 576 horizontal lines to
make up each frame of video.
HDTV uses either 720 lines, or 1080 lines to make each video frame.
● Interlacing : When TVs display video, they display a new video frame at a rate that is faster
than your eye can see (from 24 to 60 frames per second, depending on the
TV and broadcast). Interlacing refers to whether each of those frames contains
all of the lines of video for each frame or every other line. Interlaced signals take
every other line from 2 frames of video (each lasting 1/60th of a second), and
combine them into one frame lasting 1/30th of a second. In this way, interlacing
tricks your eye into thinking it is seeing twice the resolution that is actually being
displayed.
In non-interlaced video, (referred to as progressive scan video), video frames are
displayed every 1/60th of a second containing all of the lines of video information
for each frame.
The specifications for video resolutions are usually stated by giving the number of horizontal lines,
followed by either the letter i, for interlaced video, or p for progressive scan video. Most standard
TV broadcasts are 576i (576 lines of interlaced video resolution).
MD68-00296A_GB 4/27/06 2:11 PM Page 22
Operating The Receiver
Operating The Receiver
GB-25
GB
GB-24
Digital Terrestrial Receiver
4. System
This menu consists of 5 sub-menus : Product Info, Reset,
Change PIN code, Language, and Software Update.
● Place the cursor on this sub menu and press OK key.
4.1 Product Info
If you have to contact your service provider or a service
center they might ask for information available from this
menu.
Place the cursor on this sub menu and press the OK key.
4.2 Reset
This is to restore the factory set values in case the user has
encountered some problems after changing any new
values of channel data and others, which may be in error.
Select Reset menu in System menu and press OK key.
If you want to continue, select “YES” in the warning
window. The receiver will be reset to settings automatically.
Please note that the Factory Default procedure may take a
few seconds.
OPERATING THE RECEIVEROPERATING THE RECEIVER
4.3 Change PIN Code
In this option, you need to enter the current PIN code at
the first cursor, and at the second cursor enter the desired
PIN code. To confirm, you need to enter the new PIN
code again.
Please remember the PIN code should be a 4 digit
numerical value.
THE FACTORY PRESET PIN Code : 0000
4.4 Language
The “Language” option allows the user to select the
desired language of the OSD.
● To accommodate user from different regions speaking
different languages, OSD languages are available
6 languages. (English, Français, Deutsch, Español,
Italiano, and Nederlands provided currently)
● To select the desired language menu, press the
/
keys to change language and press the OK key.
● The OSD language will vary according to the selected
language.
MD68-00296A_GB 4/27/06 2:11 PM Page 24
Reference
Operating The Receiver
GB-27
GB
GB-26
Digital Terrestrial Receiver
TROUBLESHOOTINGS
Problem Possible cause Solution of the problem
No display LED on Power cord Power cord plug in correctly
the front panel; not plugged in correctly
No power supply
No pictures on the screen Receiver in Standby mode; Set receiver to “On”;
Scart not connected tightly Check connection and correct;
to video output of television;
incorrect channel or video Check channel and video output and
output selected on television correct (TV instruction manual)
No sound Audio cord connected Check connection and correct;
incorrectly;
Loudness level = 0; Increase loudness on television set;
Muting active Press the MUTE key
Remote Control does not Incorrect operation; Point remote control
operate directly towards the Receiver.
Batteries dead or inserted Replace batteries or insert correctly
incorrectly
Poor picture quality Signal strength too low Check the signal strength in
the “Manual Scan” menu, correct
alignment of your antenna
On-Screen Error Message Antenna cable not connected Check connection and correct;
“Searching for signal” or not tight;
incorrect position of the Check position and correct,
antenna; Check the signal strength in
the “Manual Scan” menu
On-Screen Error Message Receiver not yet set Scanning of in “Installation” menu
“Channel data does not
exist.”
The device, packaging material (e.g. Styrofoam) and the batteries must never be
disposed of with household refuse. Please obtain appropriate information about the
regulations in your community, and dispose of all refuse in accordance with regulations
at the separate locations provided.
In some region, the digital terrestrial signal may be weak.
So you’d better use the antenna in which the booster was built, for watching the
weak signal channels.
You can download and upgrade the system software of the receiver through
a specific channel designated by the broadcaster.
The Distributor will provide you with more information about that.
DISPOSAL
OPERATING THE RECEIVER
4.5 Software Update
Using this function, you can check if a new version of the
software is available and upgrade the software if available.
● To upgrade the software, select ‘OK’ and press the OK
key.
● Selecting this will take about 2 minutes to check if a new
version of the software is available. If a new version is
available, the software upgrade starts.
● If there is no new version, the “You don’t need to
upgrade software!” message appears.
● To cancel the upgrade, select ‘Cancel’ and press the
OK key.
MD68-00296A_GB 4/27/06 2:11 PM Page 26
Reference
GB-29
GB
Reference
GB-28
Digital Terrestrial Receiver
A/V output
TV SCART : VIDEO (CVBS, RGB), AUDIO R&L
VCR SCART : VIDEO (CVBS), AUDIO R&L
SPDIF : Digital Audio Output
HDMI : HDMI OUT (For model DTB-B460F)
Physical Specification
Size (W x H x D) : 270 mm x 200 mm x 45 mm
Weight(Net) : 1.2 kg
Operating Temperature : 0 °C to +45 °C
Storage Temperature : -10 °C to +70 °C
TECHNICAL SPECIFICATIONS
Power supply
Type : SMPS
Input voltage :
AC 230V~, 50/60Hz
Fuse rating : 250V T1.6AH
Demodulator
DEMODULATION : OFDM DEMODULATION (DVB-T)
MODE : 2K/8K
CODE RATE : Viterbi Convolutional
Code Rate - 1/2,2/3,3/4,5/6,7/8
Tuner
Freq. Range : 50~860 MHz
Input signal level : -25 ~ -65 dBm
Channel selection : PLL frequency synthesizer
Input impedance : 75 Ω unbalanced
Connector type : Din type female(RF in/RF out)
Video decoder
System decoding : MPEG 2 ISO/IEC 13818
(Transport Stream)
Profile and level : MPEG 2 MP@ML (4:2:2)
Data rate : 1~ 15 Mb/s
Video formats : 4:3 (normal) & 16:9 (widescreen)
Picture resolution : 720(H) x 576(V) x 50 fields/sec
Audio Decoder
System decoding : MPEG 1 ISO/IEC 11172~3 layer I & II
Audio mode : single channel, dual channel, stereo,
joint stereo
Sampling frequency : 32, 44.1, 48, 96 KHz
NNoottee : The specification of the STB may be changed without notice in advance.
TECHNICAL SPECIFICATIONS
MD68-00296A_GB 4/27/06 2:11 PM Page 28
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
