Baxton Studio BBT6376 User manual

Brand: Baxton Studio

Model: BBT6376

Type: User manual

Baxton Studio BBT6376 is a sturdy queen-size bed frame made of wood that requires assembly. It features a headboard, footboard, side rails, center support legs, bed slats, and various hardware components. The assembly process involves attaching the side rails to the headboard and footboard, installing the center support legs for added stability, and securing the bed slats to the frame. Once assembled, the bed frame provides a comfortable and supportive base for a mattress and bedding. Its classic design complements various bedroom decor styles.

Read this instruction carefully. See hardware and furniture part list for guidance.

Be sure all parts are complete, before you assemble. Place all wooden furniture

parts on a clean and flat soft surface to prevent from being scratched.

Follow the figure to start assembling.

CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.

2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.

3. Keep all hardware parts out of reach of children.

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

Tool needed : Screwdriver (not provider).

ASSEMBLY INSTRUCTIONS

PART LIST

ITEM DESCRIPTION QTY

A HEADBOARD 1 PC

B FOOTBOARD 1 PC

C SIDE RAIL 2 PCS

D CENTER RAIL 1 PC

E CENTER SUPPORT LEG 3 PCS

MODEL : BBT6376 QUEEN BED

F BED SLAT 26 PCS

G BED LEG 4 PCS

H CENTER SUPPORT 2 PCS

I HEADBOARD SUPPORT RAIL 1 PC

J HEADBOARD BOX (L/R) 2 PCS

K HEADBOARD SUPPORT WOOD 2 PCS

STEP 1 STEP 2

STEP 3 STEP 4

1 of 2

312

K11

HARDWARE LIST

ITEM DESCRIPTION QTY

1 JCBB BOLT M8 x 30mm 8 PCS

2 JCBC BOLT M6 x 40mm 10 PCS

3 JCBB BOLT M8 x 80mm 4 PCS

4 M6 Flat Washer 10 PCS

5 M6 Spring Washer 10 PCS

6 M8 Flat Washer 4 PCS

7 M8 Spring Washer 4 PCS

8 WOOD SCREW M3.5 x 16mm 8 PCS

9 BED SLAT SIDE FITTER 26 PCS

10 BED SLAT CENTER FITTER 13 PCS

11 M4 ALLEN KEY (BALL SHAPE) 1 PC

12 M5 ALLEN KEY (BALL SHAPE) 1 PC

13 WOOD SCREW M4 x 20mm 2 PCS

ASSEMBLY INSTRUCTIONS 2 of 2

STEP 5 STEP 6

STEP 7

* When moving the bed position, the center support legs

must be adjust to be straight to avoid any broken problem.

STEP 8

Palm

x 13

x 26

HEADBOARD

x 2

Note: Make sure the sticker

"-> HEADBOARD" faced to

headboard [A]

HEADBOARD

x 2

x 4

Note: Assemble (H) vertically

as picture shown

Read this instruction carefully. See hardware and furniture part list for guidance.

Be sure all parts are complete, before you assemble. Place all wooden furniture

parts on a clean and flat soft surface to prevent from being scratched.

Follow the figure to start assembling.

CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.

2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.

3. Keep all hardware parts out of reach of children.

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

MODEL : BBT 3106 NIGHT STAND ASSEMBLY INSTRUCTIONS PART LIST

ITEM DESCRIPTION QTY

1 -

2 -

STEP 1 STEP 2

PART LIST

ITEM DESCRIPTION QTY

A NIGHT STAND 1 PC

B HANDLE 2 PCS

C HANDLE SCREW 2 PCS

D FLAT WASHER 2 PCS

E DRAWER 2 PCS

E D

D E

STEP 3

Baxton Studio BBT6376 User manual

Baxton Studio BBT6376 User manual

Baxton Studio BBT6376 User manual

Related papers

Other documents