2. Baxton Studio
  3. BBT6376
BBT6376

Baxton Studio BBT6376 User manual

  • Hello! I've reviewed the assembly instructions for the BBT6376 queen bed and BBT3106 night stand. This document details the necessary steps, parts, and hardware for assembling both pieces of furniture. I'm ready to answer questions about the process or any specific section of the instructions.
  • What tool is needed for assembly?
    Should I fully tighten the nuts and bolts right away?
    What should I do to prevent damages to the thread?
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION QTY
A HEADBOARD 1 PC
B FOOTBOARD 1 PC
C SIDE RAIL 2 PCS
D CENTER RAIL 1 PC
E CENTER SUPPORT LEG 3 PCS
MODEL : BBT6376 QUEEN BED
F BED SLAT 26 PCS
G BED LEG 4 PCS
H CENTER SUPPORT 2 PCS
I HEADBOARD SUPPORT RAIL 1 PC
J HEADBOARD BOX (L/R) 2 PCS
K HEADBOARD SUPPORT WOOD 2 PCS
STEP 1 STEP 2
STEP 3 STEP 4
1 of 2
A
J
A
J
67
312
A
I
K11
2
4
5
D
E
A
B
G
G
C
C
A
1
12
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB BOLT M8 x 30mm 8 PCS
2 JCBC BOLT M6 x 40mm 10 PCS
3 JCBB BOLT M8 x 80mm 4 PCS
4 M6 Flat Washer 10 PCS
5 M6 Spring Washer 10 PCS
6 M8 Flat Washer 4 PCS
7 M8 Spring Washer 4 PCS
8 WOOD SCREW M3.5 x 16mm 8 PCS
9 BED SLAT SIDE FITTER 26 PCS
10 BED SLAT CENTER FITTER 13 PCS
11 M4 ALLEN KEY (BALL SHAPE) 1 PC
12 M5 ALLEN KEY (BALL SHAPE) 1 PC
13 WOOD SCREW M4 x 20mm 2 PCS
ASSEMBLY INSTRUCTIONS 2 of 2
STEP 5 STEP 6
STEP 7
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
STEP 8
Palm
Palm
F
9
F
F
10
10
9
9F
F
x 13
x 26
D
I
HEADBOARD
x 2
13
D
I
C
H
8
Note: Make sure the sticker
"-> HEADBOARD" faced to
headboard [A]
HEADBOARD
x 2
x 4
Note: Assemble (H) vertically
as picture shown
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
MODEL : BBT 3106 NIGHT STAND ASSEMBLY INSTRUCTIONS PART LIST
ITEM DESCRIPTION QTY
1 -
2 -
STEP 1 STEP 2
PART LIST
ITEM DESCRIPTION QTY
A NIGHT STAND 1 PC
B HANDLE 2 PCS
C HANDLE SCREW 2 PCS
D FLAT WASHER 2 PCS
E DRAWER 2 PCS
B
E D
CC
D E
B
STEP 3
A
/