Support KV 029274055448 Shelf Bracket User manual

Home » KV » KV 029274055448 Shelf Support Bracket Instruction Manual

Contents

1 KV 029274055448 Shelf Support Bracket

2 Tools needed for installation

3 Installation

3.1 For missing parts or installation issues

contact

4 Documents / Resources

5 Related Posts

KV 029274055448 Shelf Support Bracket

Tools needed for installation

KV 029274055448 Shelf Support Bracket Instruction Manual

Manuals+ — User Manuals Simpliﬁed.

In order to install the shelf brackets, you will need a few tools and supplies: a stud ﬁnder, level, cordless drill with a

bit or screwdriver, a pencil, a shelf, and at least two shelf brackets.

Installation

1. Determine the location on the wall.

2. Locate wall studs and mark them.

3. Use a level and place it at the height you wish to install your shelf and then mark where the top of it crosses the

stud center marks.

4. Take your ﬁrst bracket and place it so that the bracket lines up with the center of the stud and the bottom of the

horizontal mark is just above the top of your bracket surface.

5. Fasten the bracket to the wall through the top hole. Then take your level and align the bracket vertically and

fasten the bracket securely to the stud through the remaining screw holes using the wall screws.

6. Repeat the same process for the next bracket.

7. Place your shelf on the brackets and center it for maximum support.

8. Fasten the shelf to the brackets.

Installation is complete.

For missing parts or installation issues contact

Customer Service: 1.800.253.1561

customer.service@kv.com

Documents / Resources

KV 029274055448 Shelf Support Bracket [pdf] Instruction Manual

029274055448, Shelf Support Bracket, 029274055448 Shelf Support Bracket, Support

Bracket, Bracket

Manuals+,