2. safetrust
  3. DAEjYW15acU

safetrust DAEjYW15acU User guide

  • Hello! I've reviewed the Safetrust IoT Sensor Mullion 8845-100 Quickstart Guide. This document covers the installation, configuration using the Safetrust Wallet App, and testing of the device. The guide explains features like LED status indications and different access methods. I am ready to answer any questions you may have about this document or the device.
  • What cable type is required for the device?
    How is the device configured?
    What do the different LED colors indicate?
8845-100 Quickstart Guide
Last Updated: July 2022
Contents
Safetrust Inc. | safetrust.com
sales@safetrust.com
In the box
What you'll need
Installation
Configuration
Testing
Regulatory
Support
01
02
03
04
05
06
07
01
Safetrust Inc. | safetrust.com
sales@safetrust.com
In the box
Safetrust Inc. | safetrust.com
sales@safetrust.com
Sheet metal screw
SCR PTP, 2X6MM BLUE, ZINC CR3
For mounting to wall
Nylon wall plugs
Used to brace the
screws inside the wall
#6-32 x .375” phillips
flat head screw
Option 2: Secures the top
and bottom casing together
Optical tamper
reflective post
Adhered to the surface
where the sensor is being
mounted
Safetrust Inc. | safetrust.com
sales@safetrust.com
Mounting Template:
How to use
Inside the box you will find a folded
piece of paper which includes the
mounting template. Begin by trimming
the template along the thicker dotted
line, being mindful not to cut the other
dotted lines in the diagram.
Then tape the template to the installation
site, ensuring you remove the cut out
piece from the template where the
reflective tamper post will be mounted.
*The diagram in this document is not to scale and cannot be
substitued for the official mounting template.
02
Safetrust Inc. | safetrust.com
sales@safetrust.com
What you'll need
A working internet connection
Cable, 5-12 conductor (Wiegand), 4 conductor Twisted Pair Over-All Shield and
UL approved, Belden3107A or equivalent (OSDP)
Linear DC power supply
Metal or plastic junction box
Drill with various bits for mounting hardware
Safetrust Inc. | safetrust.com
sales@safetrust.com
03
Safetrust Inc. | safetrust.com
sales@safetrust.com
Installation
Safetrust Inc. | safetrust.com
sales@safetrust.com
For a wall mounted installation, begin by pre-drilling your holes and insert the nylon
screw plugs provided to support the weight of the reader. Once secured to the
wall, you can fix the black plate to the wall using the screws (SCR PTP, 2X6MM
BLUE, ZINC CR3) provided.
Safetrust Inc. | safetrust.com
sales@safetrust.com
The next step is to connect the wires as per the wiring table above.
Ground
Relay In*
Relay Out*
Red LED
Tamper
Green LED
Wiegand D0/Data
Wiegand D1/Clock/F2F
12VDC
OSDP TX+ / RS-485(A) / D0
OSDP TX+ / RS-485(B) / D1
Beeper
Black
Grey
Blue
Brown
Purple
Orange
Green
White
Red
Aqua
Pink
Yellow
Wire Colors
*Low voltage
Safetrust Inc. | safetrust.com
sales@safetrust.com
Once the back plate has been fitted and the wiring is complete, the top casing can
be inserted onto the bottom casing like shown above.
Safetrust Inc. | safetrust.com
sales@safetrust.com
Complete the hardware installation by fixing either the snake eye screw (SMF #6-
32X5/16" SS) or a Phillips screw (SMF #6-32X5/16" SS) to bottom casing.
04
Safetrust Inc. | safetrust.com
sales@safetrust.com
Configuration
Safetrust Inc. | safetrust.com
sales@safetrust.com
Open the Safetrust Wallet APP and select Manage Sensor tab. Make sure your
system admin has set you up with this role.
Safetrust Inc. | safetrust.com
sales@safetrust.com
With the Admin Installer tab open from the App, bring the phone in range of the IoT
Sensor and once visible from the App, highlight and select “Configure”.
Safetrust Inc. | safetrust.com
sales@safetrust.com
• Choose an Identity System.
• Specify the Type of access from the dropdown (eg. Door, Gate etc.)
• Assign a short Name and Description using alphanumeric characters.
• Choose an Output for the sensor (the default is set to Wiegand).
Safetrust Inc. | safetrust.com
sales@safetrust.com
When the IoT Sensor information is saved successfully to Credential Manager and
assigned to the Identity System, the new description will appear in the Manage
Sensor tab with a unique serial number assigned.
05
Safetrust Inc. | safetrust.com
sales@safetrust.com
Testing
Safetrust Inc. | safetrust.com
sales@safetrust.com
LED Ring
Status LED
Solid red
Indicates idle mode
Flashing red
Powering up
Solid green
Success
Flashing green
Credential is read and
access is granted
Access with cards
Safetrust Inc. | safetrust.com
sales@safetrust.com
LED Ring
Status LED
Solid red
Indicates idle mode
Flashing red
Powering up
Solid Blue
Success
Flashing Blue
Credential is read and
access is granted
Access with mobile
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/