2. Angelo Decor
  3. AD97715

Angelo Decor AD97715 Operating instructions

  • Hello! I've reviewed the user manual for the Angelo Decor fountain model AD97715. This document provides step by step instructions for setting up the fountain, including how to run the pump cord, connect the tubing, and fill the bowl with water. I'm ready to assist you with any questions you might have about this document and your fountain.
  • What should I do before starting the installation?
    How full should I fill the fountain with water?
    Where can I find warranty information?
Thank you for buyin
g
an An
g
elo Décor Fountain!
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need more
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First un
p
ack carton carefull
y
, arran
g
in
g
p
arts safel
y
in
y
our workin
g
area.
Run the pump cord down the cord pipe. Align the cord with the groove at the Feed the tubing
base. through the pipe.
Slide the top piece of the fountain over Set the pump to the desired setting. Connect the tubing to the pump.
the slip fit mechanism and into place.
Install the pump access door.
Final Assembly should
look like this
Now sim
p
l
y
fill with clean water and
p
lu
g
into a
g
rounded GFCI outle
t
We recommend kee
p
in
g
bowl 3/4 full of water to avoid
p
um
p
burnout.
/