RGBlink GX2L/GX4L User manual

1

GX2L GX4L

User Manual

Article NO: RGB-RD-UM-GX2L/GX4L-E000

Version NO: V1.0

GX2L/GX4L User Manual

2

Content

Declarations

...........................................................................................................................................

4

FCC/Warranty

.................................................................................................................................

4

Operators Safety Summary

.............................................................................................................

5

Installation Safety Summary

...........................................................................................................

5

Chapter 1 Your Product

.........................................................................................................................

7

1.1 In the Box

..................................................................................................................................

7

1.2 Product Overview

.....................................................................................................................

8

1.2.1 Front Panel

.....................................................................................................................

9

1.2.2 Rear Panel

.....................................................................................................................

10

1.2.4 Dimension

.....................................................................................................................

11

Chapter 2 Install Your Product

.............................................................................................................

12

2.1 Connect the Sources

...............................................................................................................

12

2.2 Connect the Power

.................................................................................................................

12

2.3 Turn on Your Product

..............................................................................................................

12

Chapter 3 Use Your Product

................................................................................................................

13

3.1 Use the Menu Buttons

...........................................................................................................

13

3.2 Menu Structure

......................................................................................................................

14

3.3 Use the Menu

.........................................................................................................................

15

3.3.1 Brightness

.....................................................................................................................

15

3.3.2 Screen Settings

.............................................................................................................

16

3.3.3 Mode Settings

...............................................................................................................

17

3.3.4 Input Settings

................................................................................................................

17

3.3.5 Output Settings

.............................................................................................................

18

3.3.6 Image Control

...............................................................................................................

20

3.3.7 Advanced Settings

........................................................................................................

20

3.3.8 语言/Language

............................................................................................................

22

3.3.9 Schedule

.......................................................................................................................

22

Chapter 4 Software

...........................................................................................................................

23

4.1 Software Installation

..............................................................................................................

23

4.2 Log in XPOSE

...........................................................................................................................

26

4.3 Software Operation

................................................................................................................

28

4.3.1 Find Device

...................................................................................................................

28

4.3.2 Input | Output | Overview

...........................................................................................

29

4.3.4 Layer Management

.......................................................................................................

33

4.3.5 Preset Management

.....................................................................................................

35

4.3.6 System Setting

..............................................................................................................

35

4.4 Parameter Adjustment of Receiver Card and Sender Card

....................................................

39

4.4.1 Software Installation

....................................................................................................

39

4.4.2 Adjustment Operation

..................................................................................................

40

4.5 Upgrade

..................................................................................................................................

44

Chapter 5 Ordering Codes

................................................................................................................

46

5.1 Product

...................................................................................................................................

46

GX2L/GX4L User Manual

3

Chapter 6 Support

...............................................................................................................................

47

6.1 Contact Us

..............................................................................................................................

47

Chapter 7 Appendix

.............................................................................................................................

48

7.1 Specification

...........................................................................................................................

48

7.2 Terms & Definitions

................................................................................................................

50

7.3 Revision History

......................................................................................................................

56

GX2L/GX4L User Manual

4

Thank you for choosing our product!

This User Manual is designed to show you how to use this video processor quickly and make use

of all the features. Please read all directions and instructions carefully before using this product.

Declarations

FCC/Warranty

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant

to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area may cause harmful interference, in which case the user will be

responsible for correcting any interference.

Guarantee and Compensation

RGBlink provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms

of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage

incurred during transport, as well as for material and manufacturing faults. RGBlink must be informed

immediately in writing of any complains.

The period of guarantee begins on the date of transfer of risks, in the case of special systems and

software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified

notice of compliant, RGBlink can repair the fault or provide a replacement at its own discretion within an

appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a

reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating

to compensation for direct or indirect damage, and also damage attributed to the operation of software as

well as to other service provided by RGBlink, being a component of the system or independent service,

will be deemed invalid provided the damage is not proven to be attributed to the absence of properties

guaranteed in writing or due to the intent or gross negligence or part of RGBlink.

If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if

the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if,

after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all

guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are

system failures which are attributed to programs or special electronic circuitry provided by the purchaser,

e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by

RGBlink either.

The environmental conditions as well as the servicing and maintenance regulations specified in this

manual must be complied with by the customer.

GX2L/GX4L User Manual

5

Operators Safety Summary

The general safety information in this summary is for operating personnel.

Do Not Remove Covers or Panels

There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous

voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover

installed.

Power Source

This product is intended to operate from a power source that will not apply more than 230 volts rms

between the supply conductors or between both supply conductor and ground. A protective ground

connection by way of grounding conductor in the power cord is essential for safe operation.

Grounding the Product

This product is grounded through the grounding conductor of the power cord. To avoid electrical shock,

plug the power cord into a properly wired receptacle before connecting to the product input or output

terminals. A protective-ground connection by way of the grounding conductor in the power cord is

essential for safe operation.

Use the Proper Power Cord

Use only the power cord and connector specified for your product. Use only a power cord that is in good

condition. Refer cord and connector changes to qualified service personnel.

Use the Proper Fuse

To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating

characteristics. Refer fuse replacement to qualified service personnel.

Do Not Operate in Explosive Atmospheres

To avoid explosion, do not operate this product in an explosive atmosphere.

Installation Safety Summary

Safety Precautions

For all product installation procedures, please observe the following important safety and handling rules

to avoid damage to yourself and the equipment.

To protect users from electric shock, ensure that the chassis connects to earth via the ground wire

provided in the AC power Cord.

The AC Socket-outlet should be installed near the equipment and be easily accessible.

GX2L/GX4L User Manual

6

Unpacking and Inspection

Before opening product shipping box, inspect it for damage. If you find any damage, notify the shipping

carrier immediately for all claims adjustments. As you open the box, compare its contents against the

packing slip. If you find any shortages, contact your sales representative.

Once you have removed all the components from their packaging and checked that all the listed

components are present, visually inspect the system to ensure there was no damage during shipping. If

there is damage, notify the shipping carrier immediately for all claims adjustments.

Site Preparation

The environment in which you install your product should be clean, properly lit, free from static, and have

adequate power, ventilation, and space for all components.

GX2L/GX4L User Manual

7

Chapter 1 Your Product

1.1 In the Box

Power Cord

HDMI-DVI Cable

USB Cable

Antistatic Bag

Certificate

Note: Power Adapter supplied as British and Australian standards.

GX2L/GX4L User Manual

8

1.2 Product Overview

GX2L supports two network port,with a maximum load capacity of 1.3 million pixels;GX4L supports four

network output, with a maximum load capacity of 2.6 million pixels.Both support resolution up to

1920

×

1080@60 or custom resolution.

GX2L

GX4L

Key Features

● Support layer movement, scale and capture

● USB one-click plug and play

● Support independent external audio

● Auto-zoom via one click

● Support custom output resolutions

● EDID

● Single LAN port supports width up to 3840,height up to 2900

● Dual ethernet cable backup

● Brightness calibration point by point

● Support one-click play,control software free

GX2L/GX4L User Manual

9

1.2.1 Front Panel

NO.

Item

Description

1

LCD

Show operation and menu items

2

Knob

（1）In home screen,press the knob to enter menu;

（2）In main menu,rotate the knob to select sub-menu and press to enter

the sub-menu;

（

3

）

In sub-menu,rotate the knob to adjust parameters and press to

confirm.

3

ESC

Back to last menu

4

SCALE

Full screen scale

5

Input source

（1）HDMI: HDMI input source;

（2）DVI: DVI input source;

（

3

）

VGA: VGA input source;

（

4

）

USB: USB input source;

（5）CVBS: CVBS input source.

6

Power switch

Press to turn on the device

1

2

3

4

5

6

GX2L/GX4L User Manual

10

1.2.2 Rear Panel

1.Input Connectors

Connector

Number

Description

DVI-D(24+1)

1

Support VESA standard input resolutions such as 1920×1080@60hz

Support preset resolutions and custom resolutions

Support HDCP 1.4 and embedded EDID 1.4

HDMI 1.3

1

HDMI 1.3, Support VESA standard input resolutions such as

1920

×

1080@60hz,support preset resolutions and custom resolutions

Support HDCP 1.4 and embedded EDID 1.4

VGA

1

Support resolutions up to 1920×1080@60hz and downward compatibility

CVBS

1

PAL/NTSC standard

USB

（

Type A

）

1

USB play:1×USB2.0

— Image Format:jpg,jpeg,png,bmp;

— Video Format:mp4,avi,mpg,mov,rmvb

AUDIO

1

Audio input and output

2.Output Connectors

Connector

Number

Description

RJ45

4

 Load capacity up to 2.6m pixels

 H MAX pixels:3840 pixels

 V MAX pixels:1920 pixels

3.Communication Connectors

Connector

Number

Description

LAN(RS232)

1

Connect control device

USB(Type B)

1

Set parameters,processors,senders,receivers and its parameters,as well as

upgrade

2

3

1

Take GX4L as an example

GX2L/GX4L User Manual

11

1.2.4 Dimension

Following is the dimension of GX4L for your reference:

Dimension of GX2L/GX4L:480mm×303mm×45mm

GX2L/GX4L User Manual

12

Chapter 2 Install Your Product

2.1 Connect the Sources

Connect signals to the product (ensure all devices are powered off first).

Tighten connector screws/locks where provided.

2.2 Connect the Power

Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.

2.3 Turn on Your Product

Press the power button.

TFT screen shows as below,meanwhile the device enter initializing state after that,the device will load the

previously saved setting. On delivery,the default input is HDMI.

Note: Since GX2L and GX4L only have the difference in the number of output network ports, other functions

and operations are the same.Therefore, GX4L is taken as an example to introduce in the following chapters.

GX2L/GX4L User Manual

13

Chapter 3 Use Your Product

3.1 Use the Menu Buttons

1.Knob

Push the knob to enter the main menu.

Rotate the knob to select the sub-menu,press the knob to confirm.

The operation steps is as follow:

2.【ESC】button

3.【SCALE】button

4. Switch Input Source

Push

【

ESC

】

to exit the current menu or back to the main menu.

Push the input source button to switch the related input

sources.

Push【SCALE】to enter <SCALE>menu.

GX2L/GX4L User Manual

14

3.2 Menu Structure

The MENU structure is shown in the figure below:

GX2L/GX4L User Manual

15

Brightness 100%

Screen Settings >>

Mode Settings >>

Input Settings >>

Output Settings >>

Image Control >>

3.3 Use the Menu

Use the menu system for convenient and intuitive operation.

GX4L TFT display shows the menu items. The TFT display will show the default state when the menu is not in use,

or the operation has timed out. Rotate the knob in the front panel, the TFT display will show the corresponding

menus according to user selections.

3.3.1 Brightness

Brightness >>

Screen Settings >>

Mode Settings >>

Input Settings >>

Output Settings >>

Image Control >>

Advanced Settings >>

语言

/Language >>

Schedule >>

Push the knob to enter the main menu,as shown above.

Rotate and push the knob to enter<brightness>

The Brightness range:0～100%

Users can adjust the brightness via the knob.

Push the knob to confirm

GX2L/GX4L User Manual

16

Smart Setting Guide

Display Connects or not

？

Yes No

Display Connection Way

Screen Settings

Open Ledset Software

Smart Setting Guide

Welcome to set up guide！

Hint

：

Press “OK” to next

Press “ESC” to last

Rotate “knob” to adjust

Input source

Input：HDMI

Smart Setting Guide

Display Connects or not

？

Yes No

3.3.2 Screen Settings

(2) If displays have not been connected, select

”

No

”

and

enter <Display Connection Way> menu.

Select<Screen Settings>to next

Select<Open Ledset Software>to set parameters in XPOSE.

Rotate and push the knob to enter<Screen Settings>

The <Screen Settings>is to quickly set the input source,

output resolution, screen parameters and output mode.

1. (1)If the display is connected,then select

“

Yes

”

and

press the knob to next.

2. (1) If the display is connected,then select “NO”and press

the knob to next.

(2) Input source:HDMI/DVI/VGA/CVBS

GX2L/GX4L User Manual

17

Cabinet Rows 1

Cabinet Columns 1

Port 1 Control cabinet 1

Cabinet Link Mode >>

Mode 1 Empty

Mode 2 Empty

Mode 3 Empty

Mode 4 Empty

Mode 5 Empty

Preset Resolution >>

Custom Resolution >>

Presettings

Save Load Delete

3.3.3 Mode Settings

3.3.4 Input Settings

GX4L support preset resolution and custom resolution

1. Rotate and press the knob to enter <Input Settings>menu

(3) In <Screen Settings>,users can set cabinet rows/ columns

and cabinet link mode.

Rotate and press the knob to enter <Mode Settings>menu

After <Screen Settings>, the parameters of the current setting

can be saved to the template mode,which can be loaded

directly later. The parameters can be saved as follows:

(1) Source: storing the current input source type;

(2) Screen:save the current screen size ,position and other

screen information;

GX4L supports up to 5 template mode.

Select

“

Load

”

to load saved mode.

GX2L/GX4L User Manual

18

LED Screen Settings

>>

Full Screen Scaling >>

Pixel to Pixel Scaling >>

Custom Scaling >>

Custom Width 1920

Custom Height 1080

Apply

800

×

600

1024

×

768

1280

×

720

1280

×

768

1280

×

800

1280

×

1024

1366×768

1440×900

1680×1050

1920×1080

1. Preset Resolution

2. Custom Resolution

3.3.5 Output Settings

3. If users want to customize the input resolution:

(1) Rotate the knob to customize the width and height of the

input signal;

(2) Press down the knob to confirm the value;

(3) Select“Apply”.

2. Users can select the following resolutions:

800

×

600,1024

×

768,1280

×

720,

1280

×

768,1280

×

800,1280

×

1024,

1366

×

768,1440

×

900,1680

×

1050,

1920

×

1080

GX4L is built in with SubitoNX Sender which can control

LED screen with RGBlink receivers.

Rotate and press knob to enter <Output settings>

GX2L/GX4L User Manual

19

Width 128

Height 96

Hori_Offset X 0

Vert_Offset Y 0

Input Capture >>

Output Window >>

1. LED Screen Settings

2. Full Screen Scaling

3. Pixel to Pixel Scaling

4.Custom Scaling

The pixel to pixel scaling is to adjust the corresponding

position of the image horizontally offset X or vertically offset Y

in LED screen controlled by receiving card.

You can adjust the value via knob.

GX4L also support custom scaling.

Screen parameters are set according to the size of the LED

screen. It is suitable for single screen mode.

For example,the size of the LED screen is 128×96 and choose

the resolution that is closest to or greater than 128 × 96 to

ensure that all images are displayed on the LED screen.

GX4L supports Full Screen Scaling,Pixel to Pixel Scaling and Custom Scaling

GX2L/GX4L User Manual

20

Input Video Source DVI

Hori_Width 128

Vert_Height 96

Hori_Start 0

Vert_Start 0

Window_Hori_Width 128

Window_Vert_Height 96

Window_Hori_Start 0

Window_Vert_Start 0

Normal

Black Out

Freeze

Test Pattern

Voice Control >>

Screen Settings >>

Load RCG File >>

USB Play Settings >>

Advanced Properties >>

Factory Reset >>

Hardware Version V1.6.6

Video Version V6.6

（1）Input Capture

（2）Output Window

3.3.6 Image Control

3.3.7 Advanced Settings

Select DVI as the input video source,and it will display the

horizontal width and vertical height of the LED screen;

Assume that the screen is 128 × 96, and the horizontal and

vertical start can be set to 0

The max horizontal start is 128

The max vertical start is 96

It shows the horizontal width and height of output window.

Assume that the screen is 128

×

96, and the horizontal and

vertical start can be set to 0

The max horizontal start is 128

The max vertical start is 96

Image control is to set the image in LED screen.

Normal : display the output image normally

Black Out : black out the output image

Freeze : freeze the output image

Test Pattern : R/G/B/W

Rotate and press the knob to

enter<Advanced Settings>Menu.

Page is loading ...

RGBlink GX2L/GX4L User manual

RGBlink GX2L/GX4L User manual

Related papers

Other documents