1
2
WARRANTY
YEAR
BA2218
22 INCH FIXED LED MONITOR
GENERAL
- Screen: 22” (55cm) Grade A LCD Digital with LED Backlight
- Format: 16:9 Widescreen
- Protection: Shock and Dust Ingress
- Resolution: 1024 x 768
- Viewing Angle: 178°/178°
- Contrast Ratio: 500:1
- Brightness: 500cd/m2
- Response Time: <25ms
- Video System: PAL/NTSC Auto Switchable
- Mounting: Fixed - wall or roof type
- Application: Bus, Coach, Train, Truck
- Signal Input: 1 RCA Video
- Working Temp: -10° ~ 60°C
- Housing: Metal Construction
- Power Supply: DC12~24V Negative Ground (9~26V)
INCLUDED
- Instruction Manual
- 2 Year Warranty
2
(1) Picture Adjustment
Colour adjustments Menu Items
Press < > keys and MENU keys to enter the following:
1. Brightness: Adjust Black Level
2. Contrast: Adjust White Level
3. Saturation: Colour Intensity
4. Hue: Adjust RGB
5. ESC. Go back to main MENU
Press MENU to select Items
(2) Imaging Adjustment
Imaging adjustments Menu Items
Press < > keys and MENU keys to enter the following:
1. The horizontal position
2. The vertical position
3. Sharpness
4. Phase
5. ESC Go back to main MENU
Press MENU to select Items
(3) MENU Adjustment
1. MENU horizontal position
2. MENU vertical position
3. MENU time
4. MENU transparent
5. ESC. Go back to main MENU
6. Language Select
Press MENU to select Items
(4) Other
1. Signal Selection
2. Imaging Selection
3. Reset
4. Volume
5. ESC. Go back to main MENU
(5) ESC MENU
Go into MENU, Adjust MENU, Select ESC, Press MENU keys, go back
main MENU or Close MENU window.
Use the included remote control to make adjustments on the unit:
3
Issue Solution
No Image Check input source or power
Displays “Input Not Supported” The display mode input signal is not
supported
Picture not screen Center Use “Automatic Correction” or manually
adjust “horizontal position” and “vertical
position”. Please refer to the
Imaging Adjustment menu (2), page 2
Image is too dark or too bright Use “Automatic Correction” or manually
adjust the brightness and contrast.
Please refer to the Picture Adjustment
menu (1), page 2
Have “No Signal” Check the display signal line connecting
Troubleshooting
BA2218
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
iiyama ProLite LH5050UHS User manual
-
-
-
-
-
Sim2 SVD 500 PLUS User manual
-
Panasonic PT-L735NTE User manual
-
-
Eiki LC-WBS500 User manual
-