2. Factory Furniture
  3. OSSO Planter

Factory Furniture OSSO Planter Operation and Maintenance Manual

  • Hello! I've reviewed the Operation & Maintenance Manual for Factory Furniture's Osso Planters, specifically the 1.5 x 0.75 x 0.75m, 1.5 x 1.5 x 0.75m, and 1.5 x 1.5 x 0.9m models. I understand the planters are made from folded aluminum and have Corten steel top panels. They have information on maintenance, cleaning, and repairs. I'm ready to answer your questions about these planters.
  • What material are the planters made from?
    What finish do the planters have?
    How should I clean the planters?
    What should I do for light damage to the painted surfaces?
    Where can I order spare parts?
factoryfurniture.co.uk
Osso Planters
OPERATION & MAINTENANCE MANUAL
factoryfurniture.co.uk
Introduction
Design
Design, shop drawings and development by
Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products
are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products
or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing
copyright remains the sole property of Factory Furniture
Ltd.
General Specifications
1.5x0.75x0.75m Planter
Metric length 1500mm | width 750mm | height 750mm
Imperial length 4’ 11” | width 2’ 5½” | height 2’ 5½”
Approx Weight 91kg
Liner Capacity 625ltr
Forklift Centres 880mm (2’ 10½”)
1.5x1.5x0.75m Planter
Metric length 1500mm | width 1500mm | height
750mm
Imperial length 4’ 11” | width 4’ 11” | height 2’ 5½”
Approx Weight 150kg
Liner Capacity 1250ltr
Forklift Centres 880mm (2’ 10½”)
1.5x1.5x0.9m Planter
Metric length 1500mm | width 1500mm | height
900mm
Imperial length 4’ 11” | width 4’ 11” | height 2’ 11½”
Approx Weight 163kg
Liner Capacity 1600ltr
Forklift Centres 880mm (2’ 10½”)
Detailed Material & Finish
Specifications
Planter
• Manufactured from lasercut aluminium sheet - all
welded construction
• Polyester powder coat finish (colour - grey as
standard or as per customer specification)
Forklift Channels
• Manufactured from folded aluminium sheet
• Bolted to planter
Top Panels
• Manufactured from lasercut Corten steel
• Top panels come in two halves, are removable and
rest on top lip of planter
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly (or as adopted)
Visual checks of table / stool top, frame and base -
check all items for superficial or physical damage
Three Monthly
Clean all items as detailed below check all fixings are
seated correctly
Six Monthly
Secure all fixings; full clean as detailed below
Specific Maintenance Details
Polyester Powder Coated Aluminium
For general cleaning using a damp cloth and warm
soapy water only. Scourers and abrasive cleaners are
NOT suitable for this type of finish and may damage it.
Before using any cleaning agents to remove grati etc.
try on a small, inconspicuous area first to avoid causing
more unsightly damage.
Corten Steel
Clean as required (but at least every three months) with
warm soapy water.
Repairs
Polyester Powder Coated Surfaces
For light damage (scratches, chips etc.) repair using
touch-up paint to match original colour (available
from Factory Furniture Ltd). Paint application should
be carried out in accordance with approved methods
detailed by the paint manufacturer. Please note that
it is advisable to use professional painters to achieve
best results when touching up larger areas. Products
for respraying larger areas are available from Factory
Furniture Ltd.
factoryfurniture.co.uk
Reordering / Spares
Instructions For Reordering
If possible, please specify job name or number at the
time of reordering to enable identification of details such
as the stainless steel finishes and polyester powder coat
colours etc. In any event where either, additional orders
are required, or spares and replacements are required
please contact Factory Furniture Ltd.
AutoCAD Drawing List
FF4004 / 01
OSSO PLANTERS
GENERAL ARRANGEMENT DRAWING
(Planter A) 1.5 x 0.75 x 0.75m
FF4004 / 02
OSSO PLANTERS
GENERAL ARRANGEMENT DRAWING
(Planter B) 1.5 x 1.5 x 0.75m
FF4004 / 03
OSSO PLANTERS
GENERAL ARRANGEMENT DRAWING
(Planter C) 1.5 x 1.5 x 0.9m
FF4004 / 04
OSSO PLANTERS
X-SECTION A-A DRAWING
Planter A
FF4004 / 05
OSSO PLANTERS
X-SECTION B-B DRAWINGS
Planter A
FF4004 / 06
OSSO PLANTERS
X-SECTION A-A DRAWING
Planter B & C
FF4004 / 07
OSSO PLANTERS
X-SECTION B-B DRAWINGS
Planter B & C
FF4004 / 08
OSSO PLANTERS
PART DETAIL DRAWINGS (1)
Planter A
FF4004 / 09
OSSO PLANTERS
PART DETAIL DRAWINGS (2)
Planter A
FF4004 / 10
OSSO PLANTERS
PART DETAIL DRAWINGS (1)
Planter B
FF4004 / 11
OSSO PLANTERS
PART DETAIL DRAWINGS (2)
Planter B
FF4004 / 12
OSSO PLANTERS
PART DETAIL DRAWINGS (1)
Planter C
FF4004 / 13
OSSO PLANTERS
PART DETAIL DRAWINGS (2)
Planter C
5 Pioneer Road, Faringdon,
Oxfordshire SN7 7BU
+44 (0)1367 242731
[email protected].uk
/