2. Factory Furniture
  3. Concrete BLOC Table

Factory Furniture Concrete BLOC Table Operation and Maintenance Manual

  • Hello! I am an AI chatbot trained to assist you with the Factory Furniture Concrete BLOC Table Operation and Maintenance Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
factoryfurniture.co.uk
Bloc Concrete Table
OPERATION & MAINTENANCE MANUAL
factoryfurniture.co.uk
Introduction
Design
Design, shop drawings and development by
Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products
are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products
or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing
copyright remains the sole property of Factory Furniture
Ltd.
General Specifications
Table
Metric length 2000mm | width 700mm | height 750mm
Imperial length 6’ 6½” | width 2’ 3½” | height 2’ 5½”
Approx Weight 580kg
Fixing Centres 1900mm (6’ 3”)
The concrete Bloc table can be combined with a couple of concrete
Bloc benches to create an outdoor dining set.
Detailed Material & Finish
Specifications
Table
• Table material - Smooth or exposed aggregate
concrete. A variety of stone eects are available
in either smooth, shot peened, honed or polished
finishes. (Please refer to ‘Concrete Finishes’
specification document for further details).
Surface is smoothed and sealed to make it water
repellant
• Internal reinforcement - Stainless steel frame
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly (or as adopted)
Visual checks of table - check for superficial or physical
damage
Three Monthly
Clean table as detailed below
Six Monthly
Full clean as detailed below; check that table is firmly
secured to the ground
Specific Maintenance Details
Concrete
Clean with a sti brush once per year, especially in
more exposed locations, in order to prevent a verdigris
type build up on the surface. Ideally, this should be
completed in early spring.
Repairs
Heavy Damage
In the event of serious damage please contact Factory
Furniture for detailed technical advice
Reordering / Spares
There are no spare parts for this model of table
AutoCAD Drawing List
FF2004 / 01
BLOC TABLE (Concrete)
FABRICATION DRAWINGS
FF2004 / 02
BLOC TABLE (Concrete)
SETTING OUT DRAWING
FF2004 / 03
BLOC TABLE (Concrete)
SETTING OUT DRAWING (Picnic set)
factoryfurniture.co.uk
Installation Instructions
All installation works to be carried out by competent
personnel - install as complete unit.
Bloc Table (Concrete)
1. Install suitable foundation pads (see illustration)
each with top face at ground level
2. Position table in correct orientation with bases
centrally on foundation pads.
750
Ground Level
2000 700
Foundation 2 no. pads
300 x 300 x 900mm in
C20 concrete
(recommendation only)
100
1900 Ctrs
Surface fix
/