OVELA OVSAFSLCERA Safe Slice Mandoline Slicer User guide

Type
User guide
SAFE SLICE MANDOLINE
SLICER
OVSAFSLCERA
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this
user guide for future reference.
Misuse of the mandoline slicer may lead to injuries.
This mandoline slicer cannot be used by persons (including children) with reduced
physical, sensory, or mental capabilities or lack of experience and knowledge, unless
they have been given supervision or instruction concerning the use of the mandoline
slicer, by a person responsible for their safety.
Ensure to thoroughly wash the mandoline slicer prior to first use.
This mandoline slicer is intended for indoor household use. Do not use this mandoline
slicer for any other purpose.
Adult supervision is required at all times when the mandoline slicer is being used by or
around children.
The blades on this mandoline slicer are sharp. Do not touch the blades or any other
moving parts.
Do not place the mandoline slicer near hot surfaces (for example, ovens, stoves).
Do not add ingredients into the mandoline slicer if something else is being currently
sliced.
SAFETY & WARNINGS
B Container
A Mandoline slicer with cover
C Feeder with pusher
D Cleaning brush
E User guide
COMPONENTS
Side view
Rear view
Blade
Thickness adjustment knob
Shape adjustment knob
OVERVIEW
Built-in blades
Feeder
Handle
Release
latch
Knobs (behind)
Container
Leg
1. Extend the leg out of the mandoline slicer until you hear a click on the notch, then
place it on a dry stable surface.
2. Remove the cover then rotate and pull the handle up. Push the release latch up and
secure the feeder with the pusher onto the mandoline slicer. It should lock into place.
3. Ensuring to align the grooves on the container with the back of the leg, insert the
container under the blades. The mandoline slicer will then be ready for use.
ASSEMBLY
Remove the pusher from the feeder.
Slicing
Place a vegetable into the feeder. Whilst pushing and holding the vegetable down with the
pusher, push and pull the handle up and down to start slicing.
Julienne
1. Lift and rotate both shape control knobs clockwise 360° before pushing them back
down. Both sets of teeth should be protruding out of the blade.
2. Place a vegetable into the feeder. Whilst pushing and holding the vegetable down
with the pusher, push and pull the handle up and down to start forming juliennes.
OPERATION
Cutting into strips
1. Lift and rotate one shape control knob clockwise 360° before pushing it back down.
One set of teeth should be protruding out of the blade.
2. Place a vegetable into the feeder. Whilst pushing and holding the vegetable down
with the pusher, push and pull the handle up and down to start forming juliennes.
Dicing
1. Use the previously outlined steps to first cut the vegetables into strips.
2. Rotate the shape control knob anti-clockwise 360° before pushing it back down. Both
sets of teeth on the blade should be retracted.
3. Place the strips into the feeder. Whilst pushing and holding the vegetable down with
the pusher, push and pull the handle up and down to dice.
Adjusting the thickness
To adjust the thickness of any cut, turn the thickness control knob to the desired setting
(18). The higher the number, the thicker the cut.
Note:
If slicing, this mandoline slider is capable of slicing between 0.28mm in thickness.
Push the release latch up and detach the feeder.
Rinse the mandoline slicer under the tap and use the cleaning brush to remove any residue.
Allow to dry completely before storing safely, out of reach of children.
CLEANING & CARE
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

OVELA OVSAFSLCERA Safe Slice Mandoline Slicer User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI