2. JasonL
  3. SP07245BK

JasonL SP07245BK, Sapphire Round Cafe Table Disc Base, Sapphire Square Cafe Table Disc Base, SP0720BK Operating instructions

  • Hello! I've reviewed the assembly instructions for the Sapphire Disc Round Base Table. This document provides detailed guidance on putting together your new table, including the necessary tools and the importance of tightening all bolts. I can assist with any specific questions you might have about the assembly process or features of the table.
  • What tools are required for assembly?
    What should I do about pre-drilled holes in the table top?
    Is it important to tighten all the bolts and screws before attaching the top?
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Sapphire Disc
Round Base Table
Page 01
Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular
table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame is suciently rigid.
Failure to do this may aect stability once the tops are attached.
Tools Required: Power screwdriver. We strongly recommend using an impact drill gun together with thread locking all screws.
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Sapphire Disc
Round Base Table
STEP 2STEP 1
Page 02
A * 1 B * 1
C * 1
G * 8 woodscrews
D * 3 (M8*30mm)
E * 3 (M8*30mm) F * 1
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Sapphire Disc
Round Base Table
STEP 3
Page 03
STEP 4
Adding the Top
Screw the table top through the
square top plate using woodscrews
(G*8 wood screws) through the
following holes.
Ask a second person to help to
turn the table and base over.
Careful: tables are heavy.
G
/