2. JasonL
  3. SPB3211GD

JasonL SPB3211GD Operating instructions

  • Hello! I'm a chat assistant and I've reviewed the assembly instructions for the Sapphire Meeting Table, specifically the 3200 x 1100 mm model. This document details the steps to assemble the table, including attaching the tops with wood screws and ensuring all components are properly tightened. I'm ready to help you with any questions you may have about assembling your new table.
  • What tools are required for assembling the Sapphire Meeting Table?
    What is the size of the Sapphire Meeting Table?
    What should I do with the pre-drilled holes on the table top?
    How many people are needed to assemble the table?
Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular
table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame is suciently rigid.
Failure to do this may aect stability once the tops are attached.
Tools Required: Power screwdriver.
Page 1 of 3
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Sapphire
Meeting Table
Size: 3200 x 1100 mm
Page 2 of 3
Need help!
Call us on
1300 527 665
www.jasonl.com.au
COMPONENTS
STEP 2STEP 1
A * 2 B * 2
C * 2
G * 24 woodscrews
D * 6 (M8*30mm)
E * 6 (M8*30mm) F * 1
ASSEMBLY INSTRUCTIONS
Sapphire
Meeting Table
Size: 3200 x 1100 mm
Page 3 of 3
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 3 STEP 4
Adding the tops
Screw the table tops to the
bases using woodscrews (G)
through the following holes.
NB: Ensure the screws are
no longer than 25mm.
Ask a second person to
help turn the table and
base over.
Careful: tables are heavy.
G
ASSEMBLY INSTRUCTIONS
Sapphire
Meeting Table
Size: 3200 x 1100 mm
/