2. JasonL
  3. SPB1811PT

JasonL SPB1811PT Operating instructions

  • Hello! I've reviewed the assembly instructions for the Sapphire 1800 x 1100 mm Meeting Table. The document includes a list of necessary tools, the components you'll need, and step-by-step instructions for putting the table together. I'm ready to answer your questions about the assembly process and any other details from the document.
  • What tools are required for assembly?
    What should I do about pre-drilled holes on the top?
    Why is it important to fully tighten bolts and screws?
Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular
table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame is suciently rigid.
Failure to do this may aect stability once the tops are attached.
Tools Required: Power screwdriver.
Page 1 of 3
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Sapphire
Meeting Table
Size: 1800 x 1100 mm
Page 2 of 3
Need help!
Call us on
1300 527 665
www.jasonl.com.au
COMPONENTS
STEP 2STEP 1
A * 2 B * 2
C * 2
G * 18 woodscrews
D * 6 (M8*30mm)
E * 6 (M8*30mm) F * 1
ASSEMBLY INSTRUCTIONS
Sapphire
Meeting Table
Size: 1800 x 1100 mm
Page 3 of 3
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 3 STEP 4
Adding the top
Screw the table top to the
bases using woodscrews (G)
through the following holes.
NB: Ensure the screws are
no longer than 25mm.
Ask a second person to
help turn the table and
base over.
Careful: tables are heavy.
G
ASSEMBLY INSTRUCTIONS
Sapphire
Meeting Table
Size: 1800 x 1100 mm
/