Square Sun Bi-Color Soft LED Flood - USER MANUAL 7
The SS-12 can be powered directly
from an AC outlet or by two V-mount
batteries (not included).
USING THE SS-12 WITH AC POWER
Important
The SS-12 is a multivoltage fixture
capable of running on 100–240 V,
50/60 Hz. The included cable has a 120 V,
50 Hz (North American) plug. To use this
fixture with other voltages, you must
use a plug adapter (sold separately).
Connect the AC power adapter to the
SS-12 with the 4-pin XLR cable, and
plug the power cable into an outlet.
The AC adapter comes in a mounting frame
that fits into one of the V-mounts. Align
the adapter with one of the V-mounts,
and slide it into the mount until it clicks.
To remove the AC adapter, press the
V-mount release button, and slide
the adapter off of the V-mount.
USING THE SS-12 WITH
BATTERY POWER
The SS-12 is powered by two V-mount
batteries. To operate the SS-12
on battery power, both V-mount
batteries must be attached.
When attaching the batteries, make sure
the power switch is in the Off position, and
the fixture is not plugged into a wall outlet.
Three-stud batteries can be used by
connecting them to the SS-12 with
D-tap power cables (not included).
POWERING THE SS-12
instructions