2. Home
  3. Home security & automation
  4. Security device components
  5. cantaloupe
  6. ePort G9 Swipe Reader

cantaloupe ePort G9 Swipe Reader User manual

  • Hello! I have reviewed the provided installation guide for the Cantaloupe ePort Telemeter G9. This document explains how to install the device, focusing on the serial interface with customer-supplied power. It details the necessary components and configuration steps, including how to connect to a card reader and a computer. I'm ready to answer your questions about this device!
  • What is the part number for the serial to DB9 interface cable?
    What is the phone number for Customer Support?
    What is the required customer supplied part for installation?
V9VUD0101210) is available upon request.
-
ured for the Serial Interface. This can be changed by calling our
Customer Support Team at 1-888-561-4748 and pressing option “1”
when prompted to reach technical assistance. Please have the serial
number of the G9 device available. The serial number begins with
“VJ” followed by nine digits. When talking with Customer Support
have them check that “Interface Type” is set for “Serial Interface.”
This guide was created during the Company's tenure as USA Technologies, Inc.
The Company rebranded to Cantaloupe, Inc. April 19th, 2021. For contact information
please visit www.cantaloupe.com.
NOTES
1.
2.
Serial Interface Installation for ePort
G9 with Customer Supplied Power
PART #: V9VUD0201240, REV A
Suite 140
Malvern, PA 19355
www.usatech.com
800.633.0340
Computer
ePort G9 Telemeter
Cable Assembly - ePort G9
Serial to DB9 interface
Part#: V9SUC0101101
Customer Supplied Molex Mini-Fit
Jr. 6 POS Receptacle Housing
1 Molex Mini-Fit Jr. 6 POS
Receptacle Housing
2 Molex Mini-Fit® Female
Crimp Terminals
Part #: 39-01-2060 Pin 1 – +12VDC Supply
Pin 2 – Ground
Top View End View
Part #: 39-00-0047
Connect to Card Reader
Serial Port 9 pin “D”
Required Parts Supplied by Customer
/