2. Notifier
  3. BB-55 Series Cabinet

Notifier BB-55 Series Cabinet User manual

  • Hello! I am a chat assistant who has reviewed the provided Product Installation Document for the BB-55 Series and CAB-3 Series Cabinets. I understand the installation instructions, including the mounting guidelines, knockout alignment, and cabinet features. I'm ready to assist with any questions you may have about the document or the products described.
  • What is the BB-55 Series cabinet door like?
    Where should the BB-55 Series cabinet be mounted in relation to the CAB-3 Series cabinet?
    When both cabinets are surface mounted, what about the knockouts?
Installing the
BB-55 Series Cabinet
Product Installation Document
Document 50295 Rev:A
P/N 50295:A 08/30/95 ECN 95-250 Rev. A
2.66
2.80
24.125
23.750
16.00
8.00
3.875
2.125
10.00
14.75
7.730 Top
Front
7.730
4.00
14.06
3.250
7.250
2.00
15.00
1.25
CAB-3 Series
Door
Left Side
BB-55 Series Cabinet
(without door)
Hinge
6" minimum Conduit
The BB-55 Series cabinets consist of a cabinet with
a lockable door that is hinged on the bottom to
swing down for access to the batteries.
They are designed to be mounted a minimum of
six inches below the CAB-3 Series Cabinets.
When both cabinets are surface mounted, the
knockout in the bottom-right corner of the CAB-3
cabinet will line up directly above the knockout in
the top-right corner of the BB-55 Series cabinet.
The BB-55 Series cabinet should be mounted in a
clean, dry, vibration-free area, using the six holes
provided.
All dimensions on the adjacent drawings are shown
in inches.
Note: The BB Series cabinets have 0.875" knock-
outs which accept standard ¾" conduit.
www.PDF-Zoo.com
firealarmresources.com
/