Amazon Caroline Instructions Manual

Type
Instructions Manual

Amazon Caroline is a stylish and durable natural gas patio heater that allows you to extend your outdoor living season. With its unique radiant heat technology, it provides warmth and comfort even on the coldest nights. The heater features a sturdy weighted base and a protective shade bracket to ensure stability and safety. It is easy to assemble and maintain, with a simple cleaning process for the composite resin body and lampshade. Create a warm and inviting atmosphere on your patio or outdoor space with Amazon Caroline, perfect for entertaining guests or relaxing on cool evenings.

Amazon Caroline is a stylish and durable natural gas patio heater that allows you to extend your outdoor living season. With its unique radiant heat technology, it provides warmth and comfort even on the coldest nights. The heater features a sturdy weighted base and a protective shade bracket to ensure stability and safety. It is easy to assemble and maintain, with a simple cleaning process for the composite resin body and lampshade. Create a warm and inviting atmosphere on your patio or outdoor space with Amazon Caroline, perfect for entertaining guests or relaxing on cool evenings.

Kindle Heater
Caroline
Natural Gas Only Patio Heater Instructions
Your guide to executing mood and
atmosphere in ways you’ve never imagined.
Reinventing the patio heater
Never operate indoors! This heater produces
carbon dioxide gas and if operated indoors can
cause injury or death!
IMPORTANT! READ PRIOR TO ASSEMBLY
Consult and adhere to the separate instructions provided by
the manufacturers of the patio heater and/or the natural
gas line before use for proper installation, ignition, and
operation.
During windy situations, please remove the Kindle Shade and
shelter the heaters away from high wind gusts.
To provide added protection against wind gusts, the use of
the enclosed Floor Mounting Clips are highly recommended.
It is also highly recommended to keep the propane tank
within the Kindle to provide extra stability.
Please report any tears or rips in the Firewall lining of your
Kindle Shade to the manufacturer for repair. Care should be
taken in transport, storage, and assembly of your Kindle
Heater to avoid such damage to the Firewall.
Due to protective oils that are used during the
manufacturing process, some smoke will rise from your
Kindle Heater during the first 15 minutes of initial use.
When storing your Kindle Heater avoid excess moisture and
debris. Be sure to clean it prior to first use after storing.
It is recommended that you have your Kindle professionally
serviced at least once a year, or more often in adverse
conditions (such as heavy commercial use, operation in
extreme environments, etc.).
Assembly
Instructions
for your
Kindle Heater
Reflector
Shade Bracket
Post
Weighted Base
Do not attach the
1/2” pipe nipple.
1. Assemble your heater according to the
instructions provided by the heater’s
manufacturing company. (Refer to the
included Sunglo A242 manual in the heater
box). Do not tighten the bolt at the base of
the post in step 1, or attach the 1/2” pipe
nipple in step 4.
2. Remove the 3 wing nuts and top washers that
secure the reflector to the top of the heater.
Place the shade bracket on top of the reflector
with the stand-offs pointing downward. Replace
washers and wing nuts and securely tighten.
Shade Bracket
Wing Nut
Washer
Reflector
Do not attach this bolt.
3. Remove the heater assembly and post
from the weighted base and place it
upside down resting on the shade
bracket.
4. Slide the lower-post cover over the post.
Make sure the fluting in both post cover
pieces are aligned (for esthetics) and
then connect the two pieces together
with the small trim ring.
6. With a flat-head screwdriver, tighten
the hose clamp around the Kindle lower-
post cover securely, to prevent the Kindle
post-cover from slipping off the post.
5. Line up the logo on the Kindle top-
post cover with the control knob on the
heater.
12. Place the shade on top of the shade
bracket. You are now ready to have a
licensed contractor install the gas line.
7. Turn the heater upright and place it
into the post socket located at the top of
the weighted base.
o Cleaning & Maintenance:
Body & Shade (Outside) Kindle body and lampshade are both made of composite
resins that are inherently scratch, chemical, UV and fade resistant. All surfaces—
except for Firewall—should be regularly washed clean with soapy water using a rag
or sponge (avoid abrasive pads) and towel dried. A light non-abrasive cleaner (i.e.
“Simple Green” or “Windex”) works well. You may use Acetone, alcohol, or paint
thinner for heavier cleaning or other stubborn marks.
Shade (Inside) the flannel like grey material you see on the inside of the shade is a
patented material called “Firewall.” This material has been designed to deflect heat
and care must be taken in the cleaning process. Firewall material may be dusted to
remove dirt, but do not scrub, brush, or use excessive moisture in cleaning this
material. If a tear occurs please contact Kindle Living at (310) 400-3024 for a
replacement or repair.
Hardware, and Shade Bracket should be kept clean, periodically inspected for
unusual wear and tear, and re-tightened when necessary.
o Limited Warranty & Service
Kindle Living products are warranted to be free of manufacturing defects for a period
of 1 year from date of purchase except for accessory lights, or other electronic
products, which are warranted for 90-days. Warranty is limited to factory repair or
replacement of parts, at company’s sole option, and exclusive of all packing and
freight charges. Warranty expressly excludes damage caused through neglect in the
use of the product—such as failing to take precautionary measure during windy
conditions—or for non-intended use. Please contact Kindle Living with any
questions pertaining to the terms of this limited warranty, replacement parts, repairs,
maintenance or use.
Please note that Kindle Living is not the manufacturer of the heaters themselves,
only the decorative covers. Heaters carry their own, separate, manufacturer’s limited
warranty which, if needed, will be fulfilled directly by the heater manufacturer. Please
refer to heater instructions for additional information.
Mode Style Mode Style
1 Static'Red 7 Static'Cool'White
2 Static'Blue 8 3'Color'Jump'Transition
3 Static'Pink 9 7'Color'Jump'Transition
4 Static'Green 10 3'Color'Gra du al'Transition
5
Static'Yellow
11
7'Color'Gra du al'Transition
6
Static'Cyan
Multi-color Light Ring Settings Chart
Your guide to executing mood and
atmosphere in ways you’ve never imagined.
www.KindleLiving.com
Need more help? Go to www.KindleLiving.com and click on support.
(username: KindleVisitor, password: goosebumps)
Need more help? Go to www.KindleLiving.com and click on support.
(username: KindleVisitor, password: goosebumps)
40 in
101 cm
98 in
249 cm
24 in
60 cm
kindle weight: 120 lb
54 kg
ship weight: 155 lb
70 kg
Caroline
Smooth Shade
FIS Design
Patent Pending
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Amazon Caroline Instructions Manual

Type
Instructions Manual

Amazon Caroline is a stylish and durable natural gas patio heater that allows you to extend your outdoor living season. With its unique radiant heat technology, it provides warmth and comfort even on the coldest nights. The heater features a sturdy weighted base and a protective shade bracket to ensure stability and safety. It is easy to assemble and maintain, with a simple cleaning process for the composite resin body and lampshade. Create a warm and inviting atmosphere on your patio or outdoor space with Amazon Caroline, perfect for entertaining guests or relaxing on cool evenings.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI