Firesense 61437 Operating instructions

PRO Series Outdoor Patio Heater

One Piece Reflector

Model # 61437

ASSEMBLY

While supporting heater, tilt the Head Assembly and slide the Reflector over

the 3 bolts that extend from the Head Assembly. Use the 3 M8 Wing Nuts

and 3 M8 Washers to secure the Reflector to the Head Assembly of the

heater. Once you have tightened the Wing Nuts, return the heater to an

upright position.

***IMPORTANT NOTICE***

-Do NOT return to place of purchase-

For customer service and warranty issues

contact our Customer Service Center at:

(866)-985-7877 OR

Customer Service Hours: Mon. – Fri. 9:00 a.m. – 6:00 p.m. (EST)

Download PDF