Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A1008
Architectural Decorative IS-CWL280612
Page 1 of 3 Instruction Sheet for Assembly and Installation
Read and understand these instructions before installing luminaire
This luminaire is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and
regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
Direct Luminaire Mounting Track Mounting
Direct Luminaire Mounting
with Track
A
Luminaires must be installed by a qualified electrician in
accordance with all national and local electrical and construction
codes and regulation.
Make sure power is OFF
Mounting Options
25 @ 4 ft (1219 mm)
CLMT2548
OK
Architectural Decorative IS-CWL280612
Page 2 of 3 Instruction Sheet for Assembly and Installation
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A1008
CLICK!
Connect the leader cable — make connections at J-Box (by others) then attach luminaire (see IS-CWLPC120).
Leader Cable
Luminaire
N
L
J-Box
(by others)
10 ft (3.05 m)
CWLPC120
Connect additional luminaires
either luminaire-to-luminaire
or via Jumper Cable
Attach Terminator
1 ft (305 mm)
CWLJC12
—
5 ft (1.5 m)
CWLJC60
Architectural Decorative IS-CWL280612
Page 3 of 3 Instruction Sheet for Assembly and Installation
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A1008
��0º
�0º
��0º
�80º
Turn the power ON
Rotate each luminaire to aim the 110° beam
B Do not attempt to install or use a luminaire until you read and understand the
installation instructions and safety labels.
B Do not use a luminaire if the lens, housing, or power cables are damaged.
B Luminaire have line voltage risk of shock and no user serviceable parts. Do
not attempt to open them.
B Do not use a luminaire for any voltage for which it is not rated. Do not
exceed the specified voltage and current input for any luminaire.
B Ensure that main power supply is off before installing or wiring a luminaire.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1) This device may not cause harmful interference. 2)
This device must accept any interference received, including interference that
may cause undesired operation.
C Do not hot swap luminaire. Ensure that power to the series is off before
connecting or disconnecting individual luminaires.
C Caution: Led Radiation Do Not Stare Into Beam Class 2 Led Product
Item Type Part Number
Concealed White LED Adjustable, 12 inch (305 mm), 120 VAC
2800 K CWL281212
4200 K CWL421212
Concealed White LED Adjustable, 6 inch (152 mm), 120 VAC
2800 K CWL280612
4200 K CWL420612
Mounting Track
25 @ 4 ft (1219 mm) CLMT2548
Leader Cable, Permanent
10 ft (3.05 m) CWLPC120
Jumper Cable
1 ft (305 mm) CWLJC12
5 ft (1.5 m) CWLJC60
/
