2. Eve Audio
  3. SC203

Eve Audio SC203 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Eve Audio SC203 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What audio input options does the Eve Audio SC203 offer?
    How do I link the Master and Slave monitors?
    How do I power on the SC203 system?
    How do I select the input source?
    How do I adjust the volume?
    What are the different functions of the front knob?
    How do I adjust the listening position?
PACKAGE CONTENT
► Master + Slave Monitors
► Stereo Link Cable
► External PSU
► 2 x FlexiPad
► Product manual
1
2
AUDIO CONNECTIONS
► Connect the signal source with either both analog RCA L/R ins, the digital optical input or the USB port.
► Link both SC203 Master and Slave monitors using the provided 4-pin connection cable.
Right monitor (Master) Left monitor (Slave)
ANALOG AUDIO SOURCE:
Soundcard, mixer, synthesizer, MP3/CD/DVD player, laptop, etc.
DIGITAL USB AUDIO SOURCE:
Soundcard, MP3/CD player, computer, etc.
DIGITAL OPTICAL AUDIO SOURCE:
Soundcard, mixer, synthesizer, SACD/CD/DVD player, etc.
OR
OR
3
POWERING ON
► Connect the Master monitor (right
speaker) to AC mains power using the
provided external PSU.
► On the Master monitor rear panel,
make sure that the Satellite lter DIP
switch is in OFF position.
4
SELECTING INPUT
► Briey push the front-panel encoder to switch the system on.
► Push the encoder to enter menu: "Bal" LED should blink.
► Turn the encoder clockwise until "Input" LED starts blinking.
► A constantly lighting LED shows the selected input. Turn the
encoder to select the input connected to the signal source:
- Top LED (#12) is lighting: Analog RCA L/R inputs
- Next LED clockwise (#13) is lighting: Digital optical input
- Next LED clockwise (#14) is lighting: USB port
► Push & hold the encoder for 3 sec. or don‘t touch it for 10 sec.
to quit the menu.
► Turn the encoder to adjust the system volume and refer to the
product manual to know everything on your SC203 system!
Analog in
Digital in
USB port
QUICK START GUIDE
EVE AUDIO SC203 MASTER/SLAVE SYSTEM
English
FRONT KNOB OPERATION
5
Standby
Push > Enter function menu (LED
mode, Low shelf, Position lter, High
shelf, Balance, Input selection)
Flashing LED > Current function
LEDs > Run counterclockwise
LEDs > Run clockwise
LEDs > Volume setting
Flashing LED > Selected function
LED stops ashing > Current function
2nd LED lights up > Current setting
2nd LED moves
accordingly > Shows
setting
Turn > Volume setting
VOLUME
STANDBY
FUNCTIONS
Turn > Select function: LED,
Low, Pos, High, Bal or Input
Turn > Edit function setting
Push > Enter selected function
Push > For further
adjustments
Push & hold
(3 sec.) > Back to
volume setting
Push & hold (3 sec.)
Push > Back to volume setting
No operation
(10 sec.) > Back to
volume setting
5.1
5.2
5.3
5.4
LISTENING POSITION
Select the Pos(ition) setting
depending on your listening
position:
Flat = LED #12 (stroke) is lighting
Desk = LED #13 is lighting
Console = LED #14 (4th dot) is lighting
Flat: Speakers on mic
stands, shelves, etc.
(w/ FlexiPads, 0°)
Desk: Speakers on a desk,
a table, etc.
(w/ FlexiPads, 15°)
Console: Speakers on meter
bridge, shelves, etc.
(w/o FlexiPads, 7.5°)
1.1. 10.2015 © EVE Audio. All rights reserved.
/