HDX EH-WSHDI-002 Operating instructions

Brand: HDX

Model: EH-WSHDI-002

Type: Operating instructions

HDX EH-WSHDI-002

The HDX EH-WSHDI-002 is a sturdy and versatile cart that can be used for a variety of storage and transportation tasks. The 3-tier design of the cart provides ample space for holding items of different sizes and shapes.

The cart can hold up to 400 lbs of evenly distributed weight, making it ideal for storing heavy items. The individual shelves can hold up to 200 lbs, while the baskets can hold up to 100 lbs. The cart features easy assembly, and the threaded connectors ensure a secure fit between the poles.

HDX EH-WSHDI-002

ssem

afety

nfor

ation

e a

d C

re G

ide

Model

EH-WSHDI-002

PACKAGE CONTENTS

1. Two adults are recommended for ease of assembly.Use care when

handing.

2. Assembly recommended on a soft surface, such as carpet, to avoid

scratching flooring finish.

3. Discard the black circular plastic pieces.These are used to separate

the shelves for shipping purposes.

CAUTION: Do not allow children to climb or play in or around

the shelves.

CAUTION:Each shelf holds up to 200 lbs, each basket holds up

to 100 lbs, evenly distributed. Static load total 400 lbs with

wheels.Do not overload.

HOMEDEPOT.COM

Please contact 1-800-514-6729 for further assistance.

STEP 1. Connect top pole (F) to bottom pole (E)

by threading connector (G) into open end of the

poles (there is a small ridge in the middle of part

(G) to gauge the distance). Repeat step 1 for

remaining poles.

F E

NOTE:

(G) may

already be attached

to (F) or (E).

STEP 2. Starting at the bottom of

each assembled pole (E&F), snap

two sleeves (A) onto poles at

desired intervals. The sleeves are

marked with a directional arrow to

show proper placement. Use

grooves on poles to ensure even

shelf placement among the four

poles.

NOTE: Place only enough sleeves

to assemble bottom shelf. This step

will be repeated for each additional

shelf and handle.

NOTE: The

bottom of the

pole (E) is the

end with the

small threaded

hole for the

wheel.

STEP 3.

Slide poles through basket shelf corners

until basket shelf (D) rests firmly on sleeves. Push

or gently tap the shelf down at corners to level shelf.

Repeat steps 2 and 3 for middle basket shelf.

STEP 4. Repeating step 2, put

two more sets of sleeves (A)

where you want the handle (H).

Slide handle (H) over poles to rest

on the sleeves. Repeat step 2 for

and instal top shelf (C). Insert

wheels (B) and tighten using

provided wrench (B).

3 Tier Commercial Cart

A-Tapered Sleeves x 28

Spare Plastic Tapered

Sleeves x 2

H-Handle x 1

B-Wheel x 2

Wheel with lock x 2

Wrench x 1

C-Shelf x 1 D-Basket x 2

E-Bottom poles with x 4

F-Top poles with x 4

& Caps Pre-installed x 4

G-Threaded connector x 4

em #204603407

HDX EH-WSHDI-002 Operating instructions

Brand: HDX

Model: EH-WSHDI-002

Type: Operating instructions

HDX EH-WSHDI-002

Download PDF

report

HDX EH-WSHDI-002 Operating instructions

HDX EH-WSHDI-002 Operating instructions

Related papers

Other documents