HDX EH-WSHDI-003 User manual

HDX
Brand
HDX
Model
EH-WSHDI-003
Type
User manual

HDX EH-WSHDI-003 is an industrial-grade 5-tier shelving unit, capable of holding up to 600 pounds per shelf evenly distributed. It is easy to assemble with just two adults and requires no tools. The shelves can be adjusted to accommodate items of various sizes and shapes, making it suitable for a variety of storage needs, both in commercial and residential settings. The unit also features adjustable levelers on the bottom of the bottom poles to ensure stability even on uneven surfaces.

HDX EH-WSHDI-003 is an industrial-grade 5-tier shelving unit, capable of holding up to 600 pounds per shelf evenly distributed. It is easy to assemble with just two adults and requires no tools. The shelves can be adjusted to accommodate items of various sizes and shapes, making it suitable for a variety of storage needs, both in commercial and residential settings. The unit also features adjustable levelers on the bottom of the bottom poles to ensure stability even on uneven surfaces.

A
S
A - Shelf x 5
A
ssem
b
Assembling the posts
S
afety
I
b
l
y
I
nfor
m
B – Tapered Sleeves x 40
Spare Plastic Tapered
Sleeves x 2
m
ation
D
U
s
s
e a
n
2
n
d C
a
a
re G
u
u
ide
C
®
PACKAGE CONTENTS
C - Bottom Poles with
Levelers Pre-installed x 4
D – Top Poles with Pole Connector
& Caps Pre-installed x 4
BB
Screw a bottom pole (C) to top pole (D). Repeat for the
remaining bottom and top poles (C and D )
Assembling the bottom shelf
Locate the desired position of the bottom shelf (A). Ensure that it is
no more than 6 in. From the oor.
Place two tapered sleeves (B) into the appropriate groove on each
pole assembly. Ensure the tapered end is up(see arrow on sleeve)
Place the shelf (A) on its side and slide each pole assembly with
tapered locks through the bottom of the shelf (A) until snug.
After all pole assemblies are in place, position the unit in the upright
position.
Push down on each corner of the shelf (A), ensuring the shelf (A) is in
a fully locked position.
Locate the desired position of the next lower shelf and
place the tapered sleeves (B) on the pole assemblies.
Slide the shelf (A) down from the top pole assemblies
and onto the tapered sleeves (B).
Push down on each shelf (A) corner , ensuring the shelf
(A) is in a fully locked position.
Repeat for the remaining shelves (A).
Move the assembly to the desired position.
If required, adjust the levelers on the bottom of the bottom poles (C )
to ensure the assembly is level. Rotate the levelers counterclockwise
to raise the poles, clockwise to lower the poles.
Adding shelves
Adjusting the levelers
1. Two adults are recommended for ease of assembly.Use care when
handing.
2. Assembly recommended on a soft surface, such as carpet, to avoid
scratching flooring finish.
3. Discard the black circular plastic pieces.These are used to separate
the shelves for shipping purposes.
CAUTION: Do not allow children to climb or play in or
around the shelves.
CAUTION:Each shelf holds up to 600 lbs, evenly distributed.
Do not overload.
HOMEDEPOT.COM
Please contact 1-800-514-6729 for further assistance.
1
4
3
A
A
D
C
5 Tier Industrial Use
Shelving
Item #20463425
Model #EH-WSHDI-003
  • Page 1 1

HDX EH-WSHDI-003 User manual

HDX
Brand
HDX
Model
EH-WSHDI-003
Type
User manual

HDX EH-WSHDI-003 is an industrial-grade 5-tier shelving unit, capable of holding up to 600 pounds per shelf evenly distributed. It is easy to assemble with just two adults and requires no tools. The shelves can be adjusted to accommodate items of various sizes and shapes, making it suitable for a variety of storage needs, both in commercial and residential settings. The unit also features adjustable levelers on the bottom of the bottom poles to ensure stability even on uneven surfaces.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents