2. Seville Classics
  3. WEB646
WEB646

Seville Classics WEB646 Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Seville Classics WEB646 Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the dimensions of the Seville Classics WEB646 steel wire utility cart?
    What is the weight capacity of the cart?
    How do I assemble the cart?
    What are the recommended uses for the cart?
    How do I contact customer service for the product?
Customer Service Informaon
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
040320
STEP 4.
Clip 4 pairs of SLEEVES (K) to all
four poles at the desired height for
BASKET SHELF (B).
Aach 2 pairs of SLEEVES (K)
narrow side of cart. Fit HANDLE (F)
over the sleeves.
Clip 4 pairs of SLEEVES (K) to tops
of all TOP POLES (D) for
TOP SHELF (A).
TIP! Count the number of grooves
when installing sleeves to keep
shelving height consistent
Make sure arrows on
SLEEVES (K) point upward.
Congratulaons!
Enjoy your new ulity cart!
Specicaons
Dimensions: 21.8" W 16.1" D x 4" H, 1" Pole Diameter
Per Shelf Overall
Weight Capacity 166 lbs. (75.3 kgs) 500 lbs. (226.8 kgs)
Cauon
Place heavier items on the lower shelves and lighter ones on the top. Do not stand or
climb on the shelving system. Do not drop heavy items on the system. Do not move
the system while loaded. Always check that wheels are screwed ght before moving.
Replace worn or damaged wheels immediately.
Model: WEB646
Thank you for choosing Seville Classics! We hope that you enjoy your new
steel wire . Please read through this user guide for parts list, assembly instruc-
ons and contact informaon.
040320
3-Tier Steel Wire Ulity Cart
J. Wrench (1)
L. Caps (4)
Parts List
A. Top shelf (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
(800) 323-5565 or send an email to Support@SevilleClassics.com
1
C. Boom shelf (1)
E. Boom poles (4)
(Small hole for wheels)
D. Top poles (4)
(Double groove on end)
G. Connectors (4)
F. Handle (1)
H. Wheels (2)
B. Basket shelf (1)
I. Locking
wheels (2)
K. Sleeves (28)
Assembly Instrucons
STEP 1.
Snap 4 pairs of SLEEVES (K)
around grooves on BOTTOM
POLES (E) and t BOTTOM
SHELF (C) over SLEEVES (K).
TIP! Count the number of
grooves from the boom of the
pole to keep the height of
shelves consistent.
Make sure arrows on
SLEEVES (K) point upward.
2
STEP 2.
Use WRENCH (J) to aach
WHEELS (H) and LOCKING
WHEELS (I) to BOTTOM
POLES (E).
TIP: We recommend
installing the same type of
wheels to the wide sides of the
cart for opmum stability.
STEP 3.
Screw CONNECTORS (G) into
tops of BOTTOM POLES (E).
Screw TOP POLES (D) onto
CONNECTORS (G).
TIP: Make sure side of TOP
POLES (D) with double groove
is at the boom.
Press CAPS (L) into tops of
TOP POLES (D).
Assembly Instrucons
/