King Canada KHP-10T-GGN User manual

Brand: King Canada

Model: KHP-10T-GGN

Type: User manual

King Canada KHP-10T-GGN 10-ton hydraulic shop press is a versatile tool designed for a wide range of pressing, straightening, and bending tasks. With its 10-ton capacity, it can handle heavy-duty jobs, while its adjustable bed frame and pressure plates allow for precise positioning of workpieces. The included grid guard enhances safety during operation, and the high-quality hydraulic pump ensures smooth and controlled operation. Whether you're a professional mechanic, DIY enthusiast, or hobbyist, this hydraulic shop press is a valuable addition to your workshop.

10 TON HYDRAULIC SHOP PRESS

WITH GRID GUARD

INSTRUCTION MANUAL

MODEL: KHP-10T-GGN

WARRANTY INFORMATION

2-YEAR

LIMITED WARRANTY

FOR THIS HYDRAULIC PRESS

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARANTY

FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

REPLACEMENT PARTS

Replacement parts for this product are available at our authorized King Canada service centers across Canada. Please use the 10 digit

part numbers listed in this manual for all part orders where applicable.

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product meets high quality and durability standards. King Canada warrants to the

original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from

defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, normal wear and tear, negligence

or accidents, repairs done by an unauthorized service center, alterations and lack of maintenance. King Canada shall in no event be

liable for death, injuries to persons or property or for incidental, special or consequential damages arising from the use of our products.

To take advantage of this limited warranty, return the product at your expense together with your dated proof of purchase to an

authorized King Canada service center. Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our

authorized service centers. In cooperation with our authorized service center, King Canada will either repair or replace the product if

any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the

warranty period.

NOTE TO USER

This instruction manual is meant to serve as a guide only. Specifications and references are subject to change without prior notice.

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4

www.kingcanada.com

GENERAL & SPECIFIC

SAFETY INSTRUCTIONS

GENERAL SAFETY RULES

1. KNOW YOUR TOOL

Read and understand the owners manual and labels affixed to

the tool. Learn its application and limitations as well as its

specific potential hazards.

2. KEEP WORK AREA CLEAN.

Cluttered areas and benches invite accidents. Make sure the

floor is clean and not slippery.

3. AVOID DANGEROUS ENVIRONMENT.

Don’t use in damp or wet locations or expose them to rain. Keep

work area well lit and provide adequate surrounding work space.

4. KEEP CHILDREN AWAY.

All visitors should be kept a safe distance from work area.

5. USE RIGHT TOOL.

Don’t force the tool or the attachment to do a job for which it was

not designed.

6. WEAR PROPER APPAREL.

Do not wear loose clothing, gloves, neckties or jewelry (rings,

watch) because they could get caught in moving parts. Non-slip

footwear is recommended. Wear protective hair covering to

contain long hair. Roll up long sleeves above the elbows.

7. ALWAYS WEAR SAFETY GLASSES.

Always wear safety glasses (ANSI Z87.1). Everyday eye-glasses

only have impact resistant lenses, thet are NOT safety glasses.

8. DON’T OVERREACH.

Keep proper footing and balance at all times.

9. MAINTAIN TOOL WITH CARE.

Keep tools clean for best and safest performance. Follow

instructions for lubricating and changing accessories.

10. USE RECOMMENDED ACCESSORIES.

Consult the manual for recommended accessories. Follow the

instructions that accompany the accessories. The use of

improper accessories may cause hazards.

11. NEVER STAND ON TOOL.

Serious injury could occur if the tool tips over. Do not store

materials such that it is necessary to stand on the tool to reach

them.

12. CHECK DAMAGED PARTS.

Before further use of the tool, a guard or other parts that are

damaged should be carefully checked to ensure that they will

operate properly and perform their intended function. Check for

alignment of moving parts, breakage of parts, mounting, and

any other conditions that may affect its operation. A guard or

other parts that are damaged should be properly repaired or

replaced.

SPECIFIC SAFETY RULES FOR HYDRAULIC SHOP

PRESS

1. RATED CAPACITY.

Maximum load is 10 Tons. DONOT exceed this rated capacity.

Always use the pressure gauge to accurately determine the

applied load.

2. QUALIFIED PERSON.

Only a qualified person should maintain this press. Keep it clean

for best and safest performance.

3. PROTECT YOURSELF.

Wear ANSI safety glasses or a full-face impact shield along with

heavy-duty gloves when operating press.

4. WORK PLACE.

Use this press on a stable, level, dry surface capable of

sustaining the load.

5. INSPECT BEFORE USE.

Inspect the press before each use. DO NOT use if bent, broken,

cracked, leaking or otherwise damaged.

6. TIGHTEN HARDWARE.

Make sure all bolts and nuts are firmly tightened before use.

7. KEEP HANDS AWAY.

Keep your hands away from the bed at all times during use.

8. DO NOT COMPRESS SPRINGS.

Never attempt to compress springs or any other item that could

disengage and cause a potential hazard. Never stand directly in

front of loaded press and never leave unattended.

9. USE PROPER HYDRAULIC OIL.

DONOT use brake fluid or any other type of improper fluid,

avoid mixing different types of oil when adding hydraulic oil. Only

good quality hydraulic pump oil can be used.

10. CENTER WORKPIECE.

Make sure that the workpiece is center-loaded and secure.

11. GRIDGUARD.

Always position the grid guard before all operations.

GETTING TO KNOW YOUR

10 TON HYDRAULIC PRESS

1. Pressure gauge. Indicates the applied pressure in tons.

2. Hydraulic cylinder.

3. Hydraulic cylinder ram and hub. Position your workpiece

centered under the hub.

4. Pressure plates (2).

5. Height adjustable bed frame.

6. Bed frame posts (2).

7. Hydraulic pump.

8. Hydraulic pump release valve.

9. Hydraulic pump handle.

10. Hydraulic pump oil filler nut.

11. Grid guard.

MODEL KHP-10T-GGN

Maximum capacity

10 Ton

Stroke 5-7/8”

Working range 0 - 14”

Bed width 13-3/8”

Bed depth 5-3/8”

Dimensions (LxWxH) 31” x 19-1/2” x 40-1/2”

Weight 115 lbs

ASSEMBLY, OPERATION

AND MAINTENANCE

ASSEMBLY- Refer to the parts diagram in this manual as a guide to assemble this hydraulic shop press.

1) Attach one base section (#217) to the base of the frame (#214) using hex. bolts (#221), washers (#218), spring washers (#219) and hex. nuts

(#220). Then attach the other base section to the other side of the frame.

2) Attach the upper plate (#208) and the under plate (#209) to the cross beam of the frame (#214) using long hex. bolts (#206), washers (#210)

and hex. nuts (#211).

3) Screw the upper round nut (#207) onto the cylinder body (#203). Insert the cylinder into the opening in the upper plate (#208), then screw the

under round nut (#212) onto the cylinder from underneath the under plate. Install the saddle (#205) to the bottom of the cylinder ram and secure

it in place with the set screw (#204).

4) Lift the bed frame (#222) and insert the bed frame support pins (#216) into the frame (#214) at equal heights. Secure both support pins by

installing two clips (#215) front and back.

5) Install the hydraulic pump assembly (#225) to the right side of the frame using hex. bolts (#223) and washers (#224). Install the pump handle

and grip (#226).

6) Connect the hydraulic hose (#227) to the connection nut on the cylinder, then install the pressure gauge (#201) to the pressure gauge

connection nut.

7) Install grid guard sliding brackets (#228) to the front of the frame (#214) using hex. nuts (#220). Slide the grid guard (#229) in between the

sliding brackets and lock it in place by installing and tightening lock knobs (#230).

BEFORE USING FOR THE FIRST TIME

1) Before using this hydraulic shop press for the first time, purge away air from the hydraulic system, open the release valve (A)Fig.1

by turning it counterclockwise. Pump several full strokes to eliminate the air in the system, retighten release valve.

2) Check all parts, if there are any broken parts, do not use this hydraulic shop press until the broken parts have been replaced.

OPERATION

1) Position the bed frame to the appropriate height using the bed frame posts. Place the

pressure plates (#213) on the bed frame and then position your workpiece in between

them.

2) Close the hydraulic pump release valve (A) Fig.1 by turning it clockwise until it is firmly

closed.

3) Pump the pump handle until the saddle gets near the top of the workpiece.

4) Align the workpiece with the cylinder assembly to ensure center-loading.

5) Lower the grid guard in front of the workpiece and lock it into place by tightening the two

lock knobs.

6) Pump the pump handle to apply load onto workpiece.

7) When the work is done, stop pumping pump handle, slowly remove the load from

workpiece by turning the pump release valve counterclockwise in small increments.

8) Once the ram has completely retracted, raise the grid guard and remove your workpiece

from the bed frame.

MAINTENANCE

1) Clean the outside of the press with a dry cloth and periodically lubricate the joints and all

moving parts with a light oil as needed.

2) When not in use, store the hydraulic shop press in a dry location with the ram and

piston of the cylinder fully retracted.

3) When the press effeciency drops, purge the hydraulic system to eliminate any air in the

system.

4) Check hydraulic oil: remove the oil filler set screw (A) Fig.2 on the pump, if hydraulic oil

is needed, fill with high quality hydraulic pump oil as necessary. Replace the oil filler set

screw and purge away any air from the hydraulic system.

PARTS DIAGRAM & PARTS LISTS

Refer to the Parts section of the King Canada web site for the most updated parts diagram

and parts list.

FIGURE 1

FIGURE 2

King Canada KHP-10T-GGN User manual

King Canada KHP-10T-GGN User manual

King Canada KHP-10T-GGN User manual

Related papers

Other documents