King Canada KM-045 User manual

Brand: King Canada

Model: KM-045

Type: User manual

King Canada KM-045 is a 9-piece punch and die kit that can be mounted to a hydraulic press. It comes with a variety of punches and dies that can be used to create different shapes and holes in metal. The kit also includes a mounting bracket and all the necessary hardware for easy installation. The KM-045 is a versatile tool that can be used for a variety of metalworking applications, including:

Creating holes in metal
Shaping metal
Cutting metal
Repairing metal

The KM-045 is made from high-quality materials and is backed by a 2-year limited warranty.

Creating holes in metal
Shaping metal
Cutting metal
Repairing metal

The KM-045 is made from high-quality materials and is backed by a 2-year limited warranty.

9 PC. PUNCH & DIE KIT

MODEL KM-045

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and

servicing purposes.

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product

meets high quality and durability standards. King Canada

warrants to the original retail consumer a 2-year limited

warranty as of the date the product was purchased at retail

and that each product is free from defects in materials.

Warranty does not apply to defects due directly or indirectly

to misuse, abuse, normal wear and tear, negligence or

accidents, repairs done by an unauthorized service center,

alterations and lack of maintenance. King Canada shall in no

event be liable for death, injuries to persons or property or for

incidental, special or consequential damages arising from

the use of our products.

To take advantage of this limited warranty, return the product at your expense together with your dated proof of

purchase to an authorized King Canada service center. Contact your retailer or visit our website at

www.kingcanada.com for an updated listing of our authorized service centers. In cooperation with our authorized

service center, King Canada will either repair or replace the product if any part or parts covered under this warranty

which examination proves to be defective in workmanship or material during the warranty period.

NOTE TO USER

This instruction manual is meant to serve as a guide only. Specifications and references are subject to change

without prior notice.

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4

www.kingcanada.com

ASSEMBLY

Mounting to Hydraulic Press

1) This kit comes with a mounting bracket (A) which

can be installed to the Hydraulic Press frame (B)

using 2 hex. bolts, washers, spring washers and

hex nuts (C).

OPERATION

Mounting Die & Punch to Hydraulic Press

1) The original die (D) on your Hydraulic Press

needs to be removed and replaced with the die (E)

included in this kit. Using the supplied hex. key

loosen set screw (F) and remove original die (D),

then install die (E) and secure it with set screw.

2) Insert the desired punch (G) in the opening of

the die (E).

PARTS DIAGRAM & PARTS LISTS

Refer to the Parts section of the King Canada web site for the most updated parts diagram

and parts list.

King Canada KM-045 User manual

Brand: King Canada

Model: KM-045

Type: User manual

Creating holes in metal
Shaping metal
Cutting metal
Repairing metal

The KM-045 is made from high-quality materials and is backed by a 2-year limited warranty.

Download PDF

report

King Canada KM-045 User manual

King Canada KM-045 User manual

Related papers