PIXEL™ Installation Instructions
Y-Leg Folding Tables
Casters only
Unboxing
You should have received two boxes per table.
Box 1 includes:
Leg assembly, with hardware in a red plastic bag,
and installation instructions.
Box 2 includes:
Table tops
Hardware
10 1/4” - 20 x 1.5” socket head cap screws
14 1/4” - 20 x 2” Button head socket drive screws
Related tables:
KYDW9648C
Step 1
Line up the two inverted tops next to each other
on the floor.
Parts list
2 Table tops
1 Leg assembly
Tools needed
Allen wrench
4AU6016 - Nov 2019
Page 1 of 2
Fig. 1
PIXEL™ Installation Instructions
Y-Leg Folding Tables
Step 2
Place the inverted base assembly
on the underside of the table tops.
Step 3
Align and attach the base with the threaded
inserts in the top.
Use 1/4 - 20 x 1.5” socket head cap screws
(A), 10 per base. Please note that 2 of these
screws are covered by the sliding lock.
Use 1/4” - 20 x 2” Button head socket drive
screws (B), 14 per base. Use 5/32” Allen
wrench, torque: >100 in/lb.
Ensure locking mechanisms are functioning
by sliding red lock handles (C) to the left and
right.
4AU6016 - Nov 2019
Page 2 of 2
Fig. 2
Fig. 3
B
A
C
C
A
A
A
B
B
B
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Exerpeutic Triple SureLock Inversion Table Owner's manual
-
-
-
Grace Company The Next Generation Quilting Frame Operating instructions
-
Invacare Pronto M41 User manual
-
Laguna Tools REVO 1216 Owner's manual
-
Invacare FDX User manual
-
Invacare Motion Concepts Ultra Low Maxx Service Manual Supplement
-
-
