Knoll Pixel KYXW7236 Installation guide

Knoll
Brand
Knoll
Model
Pixel KYXW7236
Type
Installation guide

Knoll Pixel KYXW7236 is a table with a fixed top and Y-shaped legs. It comes with either glides or casters, depending on the customer's preference. The table is available in three sizes: 72" x 36", 84" x 36", and 96" x 48". It is constructed with a durable steel frame and a laminate top. The table is designed for commercial use and can be used in a variety of settings, such as offices, schools, and libraries. It is easy to assemble and comes with all the necessary hardware. The table also features wire management clips to help keep cords organized.

Knoll Pixel KYXW7236 is a table with a fixed top and Y-shaped legs. It comes with either glides or casters, depending on the customer's preference. The table is available in three sizes: 72" x 36", 84" x 36", and 96" x 48". It is constructed with a durable steel frame and a laminate top. The table is designed for commercial use and can be used in a variety of settings, such as offices, schools, and libraries. It is easy to assemble and comes with all the necessary hardware. The table also features wire management clips to help keep cords organized.

PIXEL™ Installation Instructions
Y-Leg Fixed-top Tables
Glides or casters
Unboxing
You should have received your top plus two boxes per table.
Box 1 includes:
Leg assemblies, hardware in a red plastic bag, and installa-
tion instructions.
Box 2 includes:
Horizontal rails
Hardware
8 Flat head 1/4 - 20 screws
8 Socket cap 1/4 - 20 screws
4 5/16” Shoulder screws
2 Vertical wire management clips
(clear plastic)
4 Horizontal wire management clips
with wood screws
* Casters shown
Related tables:
KYXW7236
KYXW8436
KYXW9648
Please pay close attention to torque requirements.
Step 1.
Attach the leg assemblies (A) on each end of the two
horizontal rails (B) with flat head 1/4 - 20 screws (C),
4 per rail. Use 5/32” allen wrench, torque: 50 in/lbs
Parts list
1 Table top
2 Leg assemblies
2 Horizontal rails
2 Top brackets
Tools needed
Allen wrenches
Phillips screwdriver
Torque wrench
Fig. 1
C
C
C
C
B
B
A
A
4AU6008 - Oct 2015
Page 1 of 2
PIXEL™ Installation Instructions
Y-Leg Fixed-top Tables
Step 2.
Lay the inverted table top on the floor.
Attach table top brackets (D) to table
top with socket cap head 1/4 - 20
screws (E) 4 per bracket. Use 3/16”
allen wrench, torque: 130 in/lbs
Step 3.
Position the leg and horizontal rail
subassembly (F) on the underside of the
top. Align and attach the leg and hori-
zontal rail subassembly with the table top
brackets (G), using 5/16” shoulder screws
(H), 2 per casting. Use 5/32” allen wrench,
torque: 50 in/lbs.
Step 4.
Turn the table top assembly over into the
upright position.
All tables come with 2 vertical wire
management clips, 4 horizontal wire
management clips and wood screws
for use with optional electronic mod-
ules. See separate electrical installa-
tion instructions for details.
If the table is being used as a
stand-alone piece and the ganging
mechanism will not be used, you can
remove the mechanisms by
unscrewing them.
Fig. 2
E
E
D
D
Fig. 3
G
F
G
H
H
4AU6008 - Oct 2015
Page 2 of 2
  • Page 1 1
  • Page 2 2

Knoll Pixel KYXW7236 Installation guide

Knoll
Brand
Knoll
Model
Pixel KYXW7236
Type
Installation guide

Knoll Pixel KYXW7236 is a table with a fixed top and Y-shaped legs. It comes with either glides or casters, depending on the customer's preference. The table is available in three sizes: 72" x 36", 84" x 36", and 96" x 48". It is constructed with a durable steel frame and a laminate top. The table is designed for commercial use and can be used in a variety of settings, such as offices, schools, and libraries. It is easy to assemble and comes with all the necessary hardware. The table also features wire management clips to help keep cords organized.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents