WAGO Digital Input/Output Module 24VDC / 0.5A IF User manual

Type
User manual
Pos: 2 /Dokumentation allgemein/Einband/Einband Handbuch - Fronts eite 20 15 - mit Doc Var iabl en ( Sta ndar d) @ 9\ mod_1285229289866_0.docx @ 64941 @ @ 1
WAGO-SPEEDWAY 767
Manual
767-5803/000-800
8DIO 24V DC 0.5A IF (8xM
12)
Digital Input/Output Module 24 V DC / 0.5 A
Version 1.1.0
Pos: 3 /A lle Ser ien ( All ge mein e M odul e)/ Hin weis e z ur D oku men tati on/I mpr ess um für Standardhandbücher - allg . Anga ben, Ans chri ften, Tel efo nnum mern und E- Mail -Adr essen @ 3\mod_1219151118203_21.docx @ 21060 @ @ 1
2 WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
© 2016 by WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.
WAGO Kontakttechnik GmbH & Co. KG
Hansastraße 27
D-32423 Minden
Phone: +49 (0) 571/8 87 – 0
Fax: +49 (0) 571/8 87 – 1 69
Web: http://www.wago.com
Technical Support
Phone: +49 (0) 571/8 87 – 5 55
Fax: +49 (0) 571/8 87 – 85 55
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
=== Ende der Lis te f ür T e xtmar ke Ei nb and _vor ne = ==
WAGO-SPEEDWAY 767 Table of Contents 3
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 5 /D ok ument ati on al lg em ein/V erz eic hni sse /Inh alts ver zei chni s - Ü bersc hrift oG und Ver zeich nis @ 3\mod_1219151230875_21.docx @ 21063 @ @ 1
Table of Contents
1 Notes about this Documentation ................................................................. 6
1.1 Validity of these Operating Instructions ................................................... 6
1.2 Copyright ................................................................................................... 6
1.3 Symbols ..................................................................................................... 7
1.4 Number Notation ....................................................................................... 9
1.5 Font Conventions ...................................................................................... 9
2 Important Notes ......................................................................................... 10
2.1 Legal Bases ............................................................................................. 10
2.1.1 Subject to Changes ............................................................................. 10
2.1.2 Personnel Qualification ...................................................................... 10
2.1.3 Use in Compliance with Underlying Provisions ................................ 11
2.1.4 Technical Condition of Specified Devices ......................................... 12
2.2 Safety Advice (Precautions) .................................................................... 13
2.3 Safety Equipment .................................................................................... 14
2.4 Notes on Operation ................................................................................. 15
3 Device Description ..................................................................................... 16
3.1 Connectors ............................................................................................... 17
3.2 Marking Possibilities and Fastening ....................................................... 18
3.3 Display Elements .................................................................................... 19
3.4 Labeling ................................................................................................... 20
3.5 Schematic Diagram ................................................................................. 22
3.6 Dimensions .............................................................................................. 23
3.7 Technical Data ........................................................................................ 24
3.7.1 General Information ........................................................................... 24
3.7.2 Supply ................................................................................................. 24
3.7.3 Communication .................................................................................. 24
3.7.4 Inputs .................................................................................................. 25
3.7.5 Input Characteristic ............................................................................ 26
3.7.6 Outputs ............................................................................................... 26
3.7.7 Information on actuator selection ....................................................... 27
3.7.8 Operating state influence on output .................................................... 27
3.7.9 Counter 1 and 2 (configurable) ........................................................... 28
3.7.10 Configurable Functions ...................................................................... 28
3.7.11 Configurable functions for counters ................................................... 29
3.7.12 Diagnostics ......................................................................................... 30
3.7.13 Process Image ..................................................................................... 30
3.7.14 Indicators ............................................................................................ 30
3.7.15 Isolation .............................................................................................. 30
3.8 Approvals ................................................................................................ 31
3.9 Standards and Guidelines ........................................................................ 32
4 Mounting ..................................................................................................... 33
4.1 Information on Mounting ........................................................................ 33
4.2 Tools and Accessories Required for Mounting ....................................... 35
4.3 Direct Mounting on Your System ........................................................... 36
4.4 Mounting on a Carrier Rail (only with WAGO Accessories) ................. 37
4 Table of Contents WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
4.4.1 Fastening the Carrier Rail Adapter to the Module ............................. 37
4.4.2 Fastening the Module with Carrier Rail Adapter to a Carrier Rail .... 38
4.5 Mounting on a Profile Rail (only with WAGO Accessories) ................. 39
4.5.1 Fastening the Profile Adapter to the Module ..................................... 39
4.5.2 Fastening the Module with Profile Adapter to a Profile Rail ............. 40
4.6 Marking and Replacing the Marking Spaces .......................................... 41
4.7 Mounting the Spacer in the Case of Compact Arrangement ................... 42
5 Connecting Data and Supply Cables ........................................................ 44
5.1 Notes ....................................................................................................... 44
5.2 Required Accessories .............................................................................. 45
5.3 Connecting the S-BUS Cables ................................................................ 46
5.4 Connecting the Supply Cable .................................................................. 48
5.5 Connect Sensor/Actuator Cable .............................................................. 50
6 Commissioning ........................................................................................... 52
7 Parameterizing ........................................................................................... 53
7.1 Electronic Type Label ............................................................................. 55
7.2 Diagnostic Overview ............................................................................... 56
7.2.1 Input and Output Parameters .............................................................. 58
7.2.2 "DO Module" Mode ........................................................................... 59
7.2.3 "DI Module" Mode ............................................................................. 61
7.2.4 "DIO Module" Mode .......................................................................... 61
7.2.5 "DIO Module with Counter" Mode .................................................... 62
7.3 Global Settings ........................................................................................ 64
7.4 Parameters of Field Supply ..................................................................... 64
7.5 Automatic Storage of System Parameters ............................................... 65
7.6 Updating the Firmware ........................................................................... 65
8 Process Image ............................................................................................. 66
8.1 DO Mode ................................................................................................. 68
8.1.1 Input Data ........................................................................................... 68
8.1.2 Output Data ........................................................................................ 69
8.2 DI Mode .................................................................................................. 70
8.2.1 Input Data ........................................................................................... 70
8.2.2 Output Data ........................................................................................ 71
8.3 DIO Mode ............................................................................................... 72
8.3.1 Input Data ........................................................................................... 72
8.3.2 Output Data ........................................................................................ 73
8.4 DIO Mode + 1 Counter ........................................................................... 74
8.4.1 Input Data ........................................................................................... 74
8.4.2 Output Data ........................................................................................ 75
8.5 DIO Mode + 2 Counters .......................................................................... 77
8.5.1 Input Data ........................................................................................... 77
8.5.2 Output Data ........................................................................................ 78
9 Counter Function ....................................................................................... 80
9.1 Control of the Counter via Inputs and Outputs ....................................... 81
9.2 Controlling and Monitoring of the Counter via the Process Data ........... 82
9.2.1 Control Byte ....................................................................................... 82
9.2.2 Status Byte .......................................................................................... 83
WAGO-SPEEDWAY 767 Table of Contents 5
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
9.2.3 Example of Controlling Two Counters via the Process Data ............. 84
10 Diagnostics .................................................................................................. 85
10.1 LED Signaling ......................................................................................... 85
11 Service ......................................................................................................... 88
11.1 Updating the Firmware ........................................................................... 88
11.2 Replacing the Module ............................................................................. 88
11.2.1 Disconnecting the Cables ................................................................... 88
11.2.2 Removing the Module from Your System ......................................... 89
11.2.3 Removing the Module from the Carrier Rail ..................................... 89
11.2.4 Removing the Module from the Profile Adapter ................................ 90
11.2.5 Connecting the Module ...................................................................... 90
11.3 Disposal ................................................................................................... 90
12 Use of the Interference-Free Module in Safety Applications ................. 91
12.1 Important Notes ....................................................................................... 91
12.2 General Measures and Conditions for the Power Supply
Solution of the Module ............................................................................ 92
12.3 Measures and Conditions for Shielded Power Supply
of the Module .......................................................................................... 94
12.4 Measures and Conditions for Unshielded Power Supply
of the Module .......................................................................................... 95
12.5 Connection of the Module to Safety Switching Devices ........................ 96
12.5.1 General Structure of a Potential Group .............................................. 96
12.5.2 Examples of Connection.................................................................... 97
13 Appendix ..................................................................................................... 98
13.1 Diagnostic Information ........................................................................... 98
List of Figures ...................................................................................................... 99
List of Tables ...................................................................................................... 100
=== Ende der Lis te f ür T e xtmar ke V erz eic hnis _vor ne == =
6 Notes about this Documentation WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 7 /A lle Ser ien ( All ge mein e M odul e)/ Über sc hrif ten für all e Ser ie n/Hi nwei se zur D o kume nt ation /Hi nw eise zu dies er D o kume ntati on - Ü ber schr if t 1 @ 4\ mod_1237987661750_21.docx @ 29029 @ 1 @ 1
1 Notes about this Documentation
Pos: 8 /S eri e 76 7 ( WAGO- SP EEDW AY) /Hi nw eise zur Do kum entati o n/Hi nwei se z ur Do kume nt atio n I/O- Mod ul e 76 7-xxxx @ 5\mod_1248172015859_21.docx @ 38666 @ @ 1
The module shall only be installed and operated in conjunction with these
operating instructions and the system description.
Pos: 9 /S eri e 76 7 ( WAGO- SP EEDW AY) /Wic hti ge Erl äuter ung en/ Sic her hei tshi nwei se/ War nu ng/W arn ung : R ele ase N ot es be ac hten @ 8\ mod_1278912368761_21.docx @ 59530 @ @ 1
Observe release notes!
Please note that, within the SPEEDWAY system, a function is provided without
restriction only if all system's components have the same system-wide firmware
release. Therefore, always observe the appropriate release notes on products used.
Pos: 10 /S eri e 7 67 ( WA GO-S PEED WAY)/ Wichti ge Erlä uteru ngen/ Sich erheits hin weise/ Achtu ng/ Achtung : Vers orgu ngsaus legung @ 8\mod_1278912433448_21.docx @ 59533 @ @ 1
Supply layout!
In addition to these operating instructions, you will need the “WAGO
SPEEDWAY 767, System Description and Information” manual, which can be
downloaded at www.wago.com. There you will find information regarding supply
layout, etc.
Pos: 11 /A ll e Ser ien (Al lg emei ne M od ule)/ Hi nweis e zur D o kume ntati on /Hi nwei se/ Hin weis : D okumentation aufbewahren @ 4\mod_1237987339812_21.docx @ 29026 @ @ 1
Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation is
included, if necessary.
Pos: 12 /S eri e 7 67 ( WA GO-SPEEDWAY)/Hinweise zur Dokumentation/Gültigkeit Dokumentation I/O-Modul 767-xxxx @ 5\mod_1248172494859_21.docx @ 38679 @ 2 @ 1
1.1 Validity of these Operating Instructions
These operating instructions are only applicable to the WAGO SPEEDWAY 767
Series module 8DIO 24V DC 0.5A IF (8xM12), 767-5803/000-800.
Pos: 13.1 /All e Seri en ( Allg emei ne Mo dule) /Hi n weis e zur Do ku ment ati on/U rheb ers chu tz ausfü hrl ich @ 4\ mod_1235565145234_21.docx @ 27691 @ 2 @ 1
1.2 Copyright
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Pos: 13.2 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1
WAGO-SPEEDWAY 767 Notes about this Documentation 7
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 13.3 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Hi nwei se z ur Dok um enta tio n/S ymbol e - Ü bers chr ift 2 @ 1 3\mod_1351068042408_21.docx @ 105270 @ 2 @ 1
1.3 Symbols
Pos: 13 .4.1 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so nsti ge H inw eis e/G efa hr/G efa hr: _Warnung vor Personenschäden allgemein_ - Erl äuter ung @ 13\ mod_1343309450020_21.docx @ 101029 @ @ 1
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 13 .4.2 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Gefahr/Gefahr: _Warnung vor Personenschäden durc h elektr ische n Strom _ - Erläuterung @ 13\mod_1343309694914_21.docx @ 101030 @ @ 1
Personal Injury Caused by Electric Current!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 13 .4.3 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so nsti ge H inw eis e/W arn ung/ War nung : _ War nu ng vor P erso nens ch äde n all ge mei n_ - Erläuterung @ 13\mod_1343309877041_21.docx @ 101035 @ @ 1
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Pos: 13 .4.4 /Al le Seri en (All ge mei ne Mo dul e)/ Wic htig e Er lä uter ung en/ Sich erh eits- und sons ti ge Hi nw eis e/Vor sic ht /Vor sic ht: _War nu ng vor P ers one nsc häde n al lge mei n_ - Erläuterung @ 13\mod_1343310028762_21.docx @ 101038 @ @ 1
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Pos: 13 .4.5 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Achtung/Achtung: _War nung vor Sac hschäden allgemein_ - Erläuterung @ 13\mod_1343310134623_21.docx @ 101041 @ @ 1
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 13 .4.6 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Achtung/Achtung: _Warnung vor Sachschäden durch elektrostatische Aufladung_ - Erläuterung @ 13\mod_1343310227702_21.docx @ 101044 @ @ 1
Damage to Property Caused by Electrostatic Discharge (ESD)!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 13 .4.7 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Hinweis/Hinweis: _Wichtiger Hinweis allgemein_ - Erläuterung @ 13\mod_1343310326906_21.docx @ 101047 @ @ 1
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.
Pos: 13 .4.8 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so nsti ge H inw eis e/I nfor mat ion/ Inf or matio n: _W eiter e Inf or mati on allg emei n_ - Erl äuter ung @ 13 \mod_1343310439814_21.doc x @ 101051 @ @ 1
8 Notes about this Documentation WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).
Pos: 13.5 /Dokumentation allgemein/Gl ieder ung sel emen te/ ---Seite nwe chsel --- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
WAGO-SPEEDWAY 767 Notes about this Documentation 9
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 13 .6 /All e Seri en (Allg emeine Modul e)/Hi nweis e zur Do kument ation /Dars tellu ng der Za hlens yste me - Über schr ift 2 und I nhal t @ 3\mod_1221059454015_21.docx @ 21711 @ 2 @ 1
1.4 Number Notation
Table 1: Number Notation
Number Code
Example
Note
Decimal
100
Normal notation
Hexadecimal
0x64
C notation
Binary
'100'
'0110.0100'
In quotation marks, nibble separated with
dots (.)
Pos: 13.7 /All e Seri en ( All gemeine Module)/Hinweise zur Dokumentation/Schriftkonventionen - Übers chri ft 2 u nd I nhalt @ 3\mod_1221059521437_21.docx @ 21714 @ 2 @ 1
1.5 Font Conventions
Table 2: Font Conventions
Font Type
italic
Menu
>
menu item from a menu.
Input
“Value
[Button]
brackets.
[Key]
Pos: 14 /Doku ment ation all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
10 Important Notes WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 15 /Alle Ser ien (Al lge meine Mo dule)/ Über schrif ten für alle Ser ien/ Wichti ge Erlä uteru ngen/ Wich tige Er läuter ungen - Übersc hrift 1 @ 4\mod_1241428899156_21. docx @ 32170 @ 1 @ 1
2 Important Notes
Pos: 16.1 /All e Seri en ( All ge meine Do kum ente) ( All ge meine Mo dule) /Wi cht ige Erl äut eru nge n/Wi chti ge Erl äut eru nge n - Ei nleit ung @ 3\mod_1221059818031_21.docx @ 21717 @ @ 1
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
Pos: 16.2 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Wi chti ge Erl äuter u ngenR ec htlic he Gr undl ag en - Üb ersc hrift 2 @ 3\mod_1221060626343_21.docx @ 21726 @ 2 @ 1
2.1 Legal Bases
Pos: 16.3 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Wichtige Erläuterungen/Änderungsvorbehalt - Übers chri ft 3 un d I nhalt @ 3\mod_1221060036484_21.docx @ 21720 @ 3 @ 1
2.1.1 Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications that serve to increase the efficiency of technical
progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from
the granting of patents or from the legal protection of utility patents. Third-party
products are always mentioned without any reference to patent rights. Thus, the
existence of such rights cannot be excluded.
Pos: 16.4 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Erl äuter unge n/I/O-M od ul/ Personalqualifikation 767- xxxx @ 5\ mod_1248175871265_21.docx @ 38705 @ 3 @ 1
2.1.2 Personnel Qualification
All sequences implemented on the module may only be carried out by electrical
specialists with sufficient knowledge in automation. The specialists must be
familiar with the current standards and guidelines for the module and automation
environment.
Pos: 16.5 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1
WAGO-SPEEDWAY 767 Important Notes 11
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 16.6 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Er läut erung en/I/O -Mod ul/Bes timm ungsg emäß e Verwe ndung 7 67-58xx @ 7 \mod_1268051516747_21.docx @ 51936 @ 3 @ 1
2.1.3 Use in Compliance with Underlying Provisions
The 767-5803/000-800 module is used to output digital signals that are
transmitted by a higher-level controller (such as a programmable fieldbus coupler)
and/or for the recording of digital field signals such as those from sensors.
Pos: 16.7 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Erl äuter unge n/I/O-M odul /Bes timmu ngsg emäße V erwend ung 767- IOs all ge mein 1 @ 7\mod_1266322273828_21.docx @ 50731 @ @ 1
The module may not be used to control safety-related functions, i.e. it cannot be a
functional part of a safety function.
Pos: 16.8 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Erl äuter unge n/I/O-M odul/ Besti mmung sge mäße Ver wend ung 767-D Os 1_1 H i nweis _R üc kwir kung sfr ei @ 11\ mod_1317278760144_21.docx @ 79992 @ @ 1
The digital outputs of the module are interference-free to eliminate any impact by
the internal potential groups.
In a safety circuit, the module shall only be used together with a safety switching
device (with diagnostic function).
If additional modules are required, these modules must also be interference-free.
The module itself is no safety-oriented module. Note the "Use of the Interference-
Free Module in Safety Applications" chapter.
Pos: 16.9 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Erl äuter unge n/I/O-M odul /Bes timmu ngsg emäße V erwend ung 767- IOs all ge mein 2 @ 5\mod_1248176511796_21.docx @ 38751 @ @ 1
The module may only be operated in combination with components of the WAGO
SPEEDWAY 767 Series.
The module was developed for applications requiring IP 67 (NEMA type 6, 6P)
protection.
Pos: 16.1 0 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul/B esti mmungs gem äße Ver wendu ng 767- xxxx allgemein3 @ 8\mod_1278997190572_21.docx @ 59680 @ @ 1
Applications other than those described in this manual are not permitted.
Pos: 16.1 1 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1
12 Important Notes WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 16.1 2 /Al le Ser ien ( Allg em ein e D oku ment e) ( Allg em ein e Mo dul e)/ Wich tig e Er läut eru ngen /T ech nisc her Zus tan d der Ger ät e - Ü bers chr ift 3 u nd I nhal t @ 3\mod_1221060446109_21.doc x @ 21723 @ 3 @ 1
2.1.4 Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. WAGO
Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of
changes in hardware or software as well as to non-compliant usage of devices.
Please send your request for modified and new hardware or software
configurations directly to WAGO Kontakttechnik GmbH & Co. KG.
Pos: 16.1 3 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1
WAGO-SPEEDWAY 767 Important Notes 13
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 16.1 4 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/Wi chti ge Erl äut er unge nSi cher heit shi nwei s e - Über s chrif t 2 @ 6\ mod_1260180299987_21.docx @ 46724 @ 2 @ 1
2.2 Safety Advice (Precautions)
Pos: 16.1 5 / Ser ie 7 67 ( WAG O-SP EED WAY )/ Wich tig e Erl äuter ung en /Sic h erhei ts hinw eise /G efahr /G efahr : El e ktris che Spa nnu ng @ 8 \mod_1278307980373_21. docx @ 58901 @ @ 1
Electric voltage!
Operate the 767 Series components exclusively with 24 VDC PELV (Protective
Extra Low Voltage) or SELV (Safety Extra Low Voltage) voltage sources. Failure
to comply may result in electric shock.
Pos: 16.1 6 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /Sich erheit shin weise /Vorsi cht/ Vorsic ht: Heiß e Ansc hluss buch sen @ 8\mod_1278308217203_21.docx @ 58913 @ @ 1
Hot connection sockets!
Even when taking into account derating, high surface temperatures on the metallic
connection sockets and on the enclosure can arise during operation. If the 767
Series component has been in operation, allow it to cool off before moving it.
Pos: 16.1 7 / Ser ie 7 67 ( WAG O-S PEED WA Y)/ Wich tig e Er läu ter ung en/Si ch erh eits hin weis e/Ac ht ung /Acht ung : Hö chs te Str om belas tbar kei t d er V ers org ungs kon takt e @ 8\ mod_1278308653219_21.docx @ 58916 @ @ 1
The highest current carrying capacity of the supply contacts is 4 A!
Always observe the maximum current carrying capacity per supply line (U
LS
, U
A
)
for each 767 Series component and the overall power consumption for all
767 components. Neither of these values shall exceed 4 A since an increase in
current causes the contacts to overheat and damages the 767 Series components.
Information regarding the power demand of each 767 Series component can be
found in the corresponding data sheet, which is available from www.wago.com.
Pos: 16.1 8 / Ser ie 7 67 ( WAG O-S PEED WA Y)/ Wich tig e Er läu ter ung en/Si ch erh eits hin weis e/Ac ht ung /Acht ung : O ffen e A nschl üs se @ 8\ mod_1278308159953_21.docx @ 58910 @ @ 1
Exposed connections!
If connections have not been closed with protective caps, liquid or dirt can
penetrate the components of the 767 Series module and ruin it. Therefore, close
all unnecessary connections with protective caps, which must be ordered
separately, in order to maintain the IP67 degree of protection. (See section
“Accessories” of the fieldbus coupler/controller manual.)
Pos: 16.1 9 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Sic her hei tshi nw eise 767- xxxx_2 @ 7\mod_1267623532771_21.docx @ 51669 @ @ 1
Disconnect the power supply from the system on which you wish to mount
the 767 Series device.
Observe the appropriate accident prevention regulations for your system
during assembly, start-up, maintenance, and repairs. For example, BGV A3,
Electrical systems and equipment”.
The operating instructions for the 767 Series module and the system
description must be laid out ready on site.
Observe the exact positioning (coding) between plug and socket.
The 767 Series device shall not come into contact with substances having
seeping and insulating properties. Otherwise, additional measures shall be
14 Important Notes WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
taken for the device, such as installation of an enclosure that is resistant to
the above-mentioned substance properties.
Electronic components fulfilling the ESD requirements according to the IEC
61000-6-2 are integrated in the 767 device. As higher voltages may occur,
under unfavorable circumstances, due to electrical charge in the field,
discharge must be ensured before performing work on the 767 system.
Ensure that the potential equalization is correctly laid out.
Pos: 16.2 0 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Sic her hei tshi nw eise 767- xxxx_3 @ 7\mod_1267624103126_21.docx @ 51676 @ @ 1
Keep all cables a sufficient distance away from electromagnetic sources of
interference in order to maintain a high level of interference resistance of
the 767 system against electromagnetic emissions. Use only shielded cables
at the necessary locations, and always observe the appropriate standards for
EMC-suitable installations.
For the power supply and for the S-BUS, use only pre-assembled WAGO
system cables, so the specified characteristics of the technical data can be
achieved.
Pos: 16.2 1 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Sic her hei tshi nw eise 767- xxxx_4 @ 7\mod_1267623157545_21.docx @ 51662 @ @ 1
Replace defective or damaged modules (e.g., deformed connections), else
function disruptions can occur in the respective fieldbus stations or nodes.
When laying any cables, make sure that you do not lay them within the
shear range of movable machine parts.
For each activity, observe the corresponding personnel qualification in the
corresponding section.
Observe the marking on the front and rear side of the module.
Pos: 16.2 2 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen/I/ O-Mo dul/Si cher heitsei nric htung en 767- xxxx @ 7 \mod_1268142379773_21.docx @ 52055 @ 2 @ 1
2.3 Safety Equipment
All 767 Series products are designed to meet the requirements of IP67. This
includes complete protection against accidental contact with electrical voltage and
currents even when wet.
Pos: 16.2 3 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1
WAGO-SPEEDWAY 767 Important Notes 15
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 16.2 4 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Hi nwei se zum Betr i eb 7 67-xxxx, Teil 1 @ 7\mod_1266921815843_21.docx @ 51219 @ 2 @ 1
2.4 Notes on Operation
When integrating the 767 module in your machine or system, all the currently
applicable norms, regulations and guidelines shall be observed during all
activities: for example, BGV A3, Electrical systems and equipment”,
DIN EN 418, EN 60204. The emergency stop equipment shall remain effective in
all operating modes of the system and machine.
For protection from electromagnetic interferences
Connect your system to protective earth (PE), and
Pos: 16.2 5 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Hi nwei se zum Betr i eb 7 67-I/O , Teil 2 @ 5\mod_1248180225875_21.docx @ 38755 @ @ 1
Ensure that the cable routing and the installation of the fieldbus cable, S-
BUS cable, supply cable, and sensor or actuator cable are correct.
Pos: 16.2 6 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Hi nwei se zum Betr i eb 7 67-xxxx, Teil 3 @ 7\mod_1266921848140_21.docx @ 51222 @ @ 1
The following elements for 24 V supply shall be present:
Outer lightning protection on buildings
Inner lightning protection of supply lines and signal lines
Safe electrical separation of low voltage 24 VDC through PELV (Protective
Extra Low Voltage) or SELV (Safety Extra Low Voltage) voltage sources
Pos: 17 /Doku ment ation all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
16 Device Description WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 18.1 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Ger äte bes chr eib ung /Ger äte bes chr eib ung - Über sc hrift 1 @ 3\mod_1233756084656_21.docx @ 27096 @ 1 @ 1
3 Device Description
Pos: 18.2 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bu ng/I /O-Mo dule/ Gerät ebes chrei bung 7 67-58xx @ 7 \mod_1268051953922_21.docx @ 51943 @ @ 1
The module 767-5803/000-800 is a hybrid module, which can be operated in five
ways:
DO mode
Operating as a digital output module (all channels)
This mode is used, for example, to control solenoid valves, contactors,
encoders, relays or other elect. loads.
DI mode
Operation as digital input module (all channels)
This mode is used, for example, to evaluate encoders, sensors, switches and
proximity switches.
DIO mode (Delivery state)
Combined operation of digital inputs and outputs (parametrizable per channel).
This mode combines inputs and outputs on one module. By default, all
channels are configured as digital inputs.
DIO mode + 1 counter
Combined operation of digital inputs and outputs with a counter function. The
counter can be configured as an event counter, gate time counter or pulse
duration counter.
DIO mode + 2 counters
Combined operation of digital inputs and outputs with two counter functions.
The counter can be configured as an event counter, gate time counter or pulse
duration counter.
The module has many configuration options that can be carried out via a fieldbus
coupler. The module settings take on fieldbus through the device description file
(eg. GSD, GSDML, etc.) of a field bus or via FDT / DTM frame application
(eg. WAGOframe). Detailed information about assignment of module parameters
using a fieldbus in the corresponding manual (e.g., PROFIBUS Fieldbus Coupler
767-1101).
Detailed information about the properties of the module can be found in section
"Technical data".
Pos: 18.3 /Dokumentation allgemei n/Gli eder ungs ele men te/---Sei te nwec hsel --- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
WAGO-SPEEDWAY 767 Device Description 17
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 18.4 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Ger äte bes chr eib ung /Ans chl üss e - Üb ersc hrift 2 @ 4\ mod_1240984262656_21.docx @ 31961 @ 2 @ 1
3.1 Connectors
Pos: 18.5 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bu ng/A nsc hlüs se/I /O-M odule/ Ansc hlüss e 767-xxxx 8 xM12 - Bild @ 11\mod_1317299247686_21.docx @ 80268 @ @ 1
Figure 1: Connectors
Pos: 18.6 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bu ng/A nsc hlüs se/I /O-M odule/ Leg ende An schlus s 767-xxxx S-BU S @ 5\ mod_1248847875187_21. docx @ 39167 @ @ 1
Table 3: Legend for figure "Connectors"
Position
Description
Function
1
S-BUS input
M12 plug, B-coded
For transmitting data from previous 767
Series components.
2
S-BUS output
M12 socket, B-coded
For transmitting S-BUS data to the next
767 Series components or to the S-BUS
terminator.
Pos: 18.7 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bu ng/A nsc hlüs se/I /O-M odule/ Leg ende An schlus s 767-58xx DIO 8xM12 @ 11\mod_1317730559715_21.docx @ 80561 @ @ 1
3
Digital inputs/outputs
X1 - X8
M12 socket, A-coded
For connecting digital sensors or
actuators, as well as for using counter
functions.
Pos: 18.8 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bu ng/A nsc hlüs se/I /O-M odule/ Leg ende An schlus s 767-xxxx Versorgung, nicht 4803 und 4804 @ 5\mod_1248847875765_21.docx @ 39171 @ @ 1
4
Supply output
M12 socket, A-coded
To use the Logic-/Sensor-
supply and/or actuator supply for the
following I/O modules.
5
Supply input
M12 plug, A-coded
For feeding in both U
LS
(logic and sensor
supply) and U
A
(actuator supply).
Pos: 18.9 /Dokumentation allgemei n/Gliederungselemente/---Seite nwec hsel --- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
1
2
3
3
3
5
4
3
18 Device Description WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 18.1 0 / Ser ie 7 67 ( WAG O-SPEEDWAY)/Gerätebeschreibung/Befestigung/I/O-Module/Beschriftung und Befestigung 767-xxxx_8xM12 - Bil d @ 11\mod_1317360686311_21.docx @ 80294 @ 2 @ 1
3.2 Marking Possibilities and Fastening
Figure 2: Marking possibilities and fastening (exemplary)
Pos: 18.1 1 / Ser ie 7 67 ( WAG O-SPEEDWAY)/Gerätebeschreibung/Befestigung/I/O-Mo dule/L egend e zu Bes chrif tung un d Befes tigu ng 767-xxxx @ 5\mod_1249475777546_21.docx @ 40514 @ @ 1
Table 4: Legend for figure "Marking possibilities and fastening"
Position
Description
Function
10
Module marker card
For identifying the module within a
fieldbus node.
11
Mounting holes
With integrated function earth (FE) socket
for fastening and grounding the module.
12
Marker strips
For identifying inputs.
Pos: 18.1 2 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1
10
11
12
11
WAGO-SPEEDWAY 767 Device Description 19
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 18.1 3 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/G erät ebes chr ei bung /An zeig eel em ent e - Über sc hrif t 2 @ 4\ mod_1240984390875_21.docx @ 31964 @ 2 @ 1
3.3 Display Elements
Pos: 18.1 4 / Ser ie 7 67 ( WAG O-S PEED WAY )/G eräte bes chr eibu ng/A nzei geel eme nte/ I/O-M od ul e/Anz eig eel emen te 767- xxxx_IO_8 xM12 - Bild @ 11\mod_1317360409429_21.docx @ 80290 @ @ 1
Figure 3: Display elements (exemplary)
Pos: 18.1 5 / Ser ie 7 67 ( WAG O-S PEED WAY )/G eräte bes chr eibu ng/A nzei geel eme nte/ I/O-M od ul e/Leg en de zu Anz eig eel em ente 767- xxx x, Pos. 1 5+16: St atus SB und F @ 5\mod_1248854485718_21.docx @ 39190 @ @ 1
Table 5: Legend for figure "Display elements"
Position
LED
Color
Meaning
15
SB
Green/red/orange
S-BUS status
16
F
Red
Diagnostic information
Pos: 18.1 6 / Ser ie 7 67 ( WAG O-S PEED WAY )/G eräte bes chr eibu ng/A nzei geel eme nte/ I/O-M od ul e/Leg en de zu Anz eig eel em ente 767- 58x x, Pos. 1 7: Stat us DIO @ 7\ mod_1268053575307_21.docx @ 51964 @ @ 1
17
0 bis 7
Yellow/red
Status signal inputs/ outputs
Pos: 18.1 7 / Ser ie 7 67 ( WAG O-S PEED WAY )/G eräte bes chr eibu ng/A nzei geel eme nte/ I/O-M od ul e/Leg en de zu Anz eig eel em ente 767- xxx x, Pos. 1 8+19: St atus U A und ULS @ 7\mod_1268053208570_21. docx @ 51957 @ @ 1
18
U
A
Green
Actuator supply is present.
19
U
LS
Green
Logic supply and sensor supply are
present.
Detailed information
Detailed information can be found in section "Diagnostics" > "LED Signaling".
Pos: 18.1 8 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1
15
17
16
17
19
18
20 Device Description WAGO-SPEEDWAY 767
767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)
Manual
Version 1.1.0
Pos: 18.1 9. 1 /Al le S eri en ( Allg em ein e Mo dul e)/Ü ber schr ift en f ür al l e Ser ien/ G erät ebesc hr eib ung/ Bedr uc kung - Ü bers chri ft 2 @ 4\mod_1241082409515_21.docx @ 32035 @ 2 @ 1
3.4 Labeling
Pos: 18.1 9. 2 /S erie 767 ( W AGO -SPE EDWA Y)/G erät ebes chr eibu ng/B edr uck ung/ I/O-M odul e/B edr uck ung 76 7-580 3 - Bild @ 11\mod_1317727059832_21. docx @ 80525 @ @ 1
Figure 4: Labeling (example)
Pos: 18.1 9. 3 /S erie 767 ( W AGO -SPE EDW AY) /Ger äte beschr ei bung /Bedr uc kung /I/O- Mod ul e/Leg en de z ur B edr uc kung 767- 5803 DIO @ 13\mod_1350636358318_21.docx @ 104940 @ @ 1
Table 6: Legend for figure "Labeling"
Position
Description
30
Manufacturer's mailing address
31
Connection assignment of S-BUS
32
Connection assignment of digital inputs and outputs
33
Connection diagram of digital inputs and outputs
34
Connection assignment of supply input and output
35
Information on approvals and CE marks
36
Unambiguous identification of module
37
Item number
Pos: 18.1 9. 4 /D oku ment ati on al lge mei n/Gl ied eru ngs ele ment e/---S eiten wec hs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
36
33
31
30
37
34
35
32
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102

WAGO Digital Input/Output Module 24VDC / 0.5A IF User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI