Yard Butler 7797905 Installation guide

Wall Mount Hose Hanger

INSTALL INSTRUCTIONS

Mounting your hose hanger:

Be sure to use appropriate mounting hardware for your wall's surface type

(stucco, brick, wood, etc.)

Remember that a 100' hose filled with water can weigh more than 20 pounds.

Position the hose hanger on the wall near the spigot and mark the location for the

screws, preferably on a stud.

1. Drill holes for the fastener using a masonry or concrete drill bit

2. Fill hole with caulking and install appropriate wall anchors

3. Screw the mounting screws into the anchors to attach the hanger

LIMITED LIFETIME GUARANTEE

At Lewis Tools we design and build all of our Wall Mount Hose

Hanger ls to provide you with many years of service and

satisfaction. We provide the following limited guarantee:

Wall Mount Hose Hanger are guaranteed for life to be free from

any defect in materials or workmanship.

This manual is also suitable for

Download PDF