Wall Mount Hose Hanger
• Eliminates crimps, kinks and tangles
• Extends hose life
• Heavy duty bracing prevents sagging
Installation Instructions:
1. Mark where holes should be drilled. For wood, drill 3⁄8"
pilot holes or for masonry drill 5⁄8" holes and insert
plastic anchors.
2. Insert 11⁄2" screws into holes. Tighten until 1⁄4" is
left exposed. Place Hose Hanger on screws.
The higher up you mount your hose hanger, the more hose it
will hold and the easier it will be to re-coil. Storing
your hose with fewer, larger coils will help prevent kinks
and cracks. Works great for electrical cords, air hoses, or
anything else that needs to be coiled for storage.
For a complete list of our products please visit us online
at www.lewistools.com
/
