OQTIQ MagGripDash User manual

Brand: OQTIQ

Model: MagGripDash

Type: User manual

MaxGrip Dash Mount

EMAIL US: [email protected]

IMPORTANT ! Life-Time Warrenty!

IF YOU NEED ASSISTANCE OR REPLACEMENT PARTS

91.245MM

70MM

STEP

4

Put the mount on the dash and press it.

Firmly Press And Hold the Mounting Base

in place 2 minutes

Ensure the VHB Adhesive Make full contact

with the dash surfaces

Let Sit For At Least 24 Hours Before Using.

Please Note the 3M Tape Base is One-time Use;

You Can Use the Extra Pad we supplied or

Contact us for Free replacement.

Central mounting locations work best to

switch between horizontal and vertical

viewing angles, but find a spot that suits your

needs. When ready, peel adhesive and stick

plate to phone case or apply directly to back

of phone.

For thinner cases, simply place inside of the

case. To maximize the magnetism for thicker

cases, we recommend affixing to the outside

of your case.

Where should I affix the magnet plate?

Follow Tips:

First Time To Use Magnetic Mount?

QI Charging

Position

Metal Plate

Position

NOTE

·Installation between

the case and device

·Installation on the

back of device

·Installation on the

back of the case

①

②

Metal Plate

Removal Paper

Inside of Mobile

Phone Case

①

②

Metal Plate

Removal Paper

②

①

Metal Plate

Removal Paper

iPhone x or other wireless charing

phones place charge wirelessly in

the middle of the charging pad

which leave plenty of space above

and below to place a metal plate

which will not interfere.

YOU CAN INSTALL THE PLATES EITHER WITH

OR WITHOUT

USING THE PROTECTIVE FILM.

Install Metal Plate on QI Cell Phones

Let us know by leaving a review online,

or connect with us on our social platforms.

Love Your Oqtiq Mount

[email protected]

LIFE TIME WARRENTY

Our Customer Service Team is waiting to assist you!

Please reach out to us at

Having Issues?

WE WILL RESOLVE ALL ISSUES

IN YOUR FAVOR, EVEN YEARS

AFTER YOUR PURCHASE

STEP

2

STEP

3

Choose a location on the dashboard where

you have enough free space to swivel the

phone freely when connected to the car

mount.

Clean the surface of the dash before

applying the adhesive.

Tear off the base protective film.

STEP

2

STEP

1

Unscrew the screw-nut on the Mount Head

Place the screw-nut over the ball joint on the

Mount base.

Snap the ballhead onto the swivel joint and

tighten the Screw-nut.

MINUTES

B E F O R E

USING

24h

1, Clean the area you intend to stick the metal

plate onto (mobile device or phone case).

2, (Optional Step) To protect the surface of

your smartphone from the metal plate's sticky

adhesive, Apply the included protective film

directly onto your smartphone.

3, Remove 3M adhesive backing from the

metal plate.

4, Firmly stick the matal plate directly onto the

surface of your smartphone OR onto the

protective film you installed in Step 2.

Secure Metal Plate Installation

1

OQTIQ MagGripDash User manual

Brand: OQTIQ

Model: MagGripDash

Type: User manual

Download PDF

Related papers

Other documents