OQTIQ MagGripCD User manual

Brand: OQTIQ

Model: MagGripCD

Type: User manual

If the base interferes with anything, or

does not sit flush, you can flip it upside

down. Be sure to tighten the metal

knob to secure the base.

STEP

4

As the metal plate is settled,

the magnetic mount is

ready to hold your device

Tips

STEP

1

Snap the ballhead onto the swivel joint and

tighten the Screw-nut.

Insert the base blade

into the CD slot

STEP

2

STEP

3

Tighten the knob clockwise FOR a perfect fit.

Make Sure the mount is secured.

3 simple ways adoptable to solve this.

Proceed to add the metal plate to your

device after the mount is securely in place.

Adjustable

Knob

Let us know by leaving a review online,

or connect with us on our social platforms.

Love Your Oqtiq Mount

[email protected]

LIFE TIME WARRENTY

Our Customer Service Team is waiting to assist you!

Please reach out to us at

iPhone x or other wireless charing

phones place charge wirelessly in

the middle of the charging pad

which leave plenty of space above

and below to place a metal plate

which will not interfere.

QI Charging

Position

Metal Plate

Position

YOU CAN INSTALL THE PLATES EITHER WITH

OR WITHOUT

USING THE PROTECTIVE FILM.

NOTE

·Installation between

the case and device

·Installation on the

back of device

·Installation on the

back of the case

①

②

Metal Plate

Removal Paper

Inside of Mobile

Phone Case

①

②

Metal Plate

Removal Paper

②

①

Metal Plate

Removal Paper

MaxGrip CD Mount

IMPORTANT !

1, Clean the area you intend to stick the metal

plate onto (mobile device or phone case).

2, (Optional Step) To protect the surface of your

smartphone from the metal plate's sticky

adhesive, Apply the included protective film

directly onto your smartphone.

3, Remove 3M adhesive backing from the metal

plate.

4, Firmly stick the matal plate directly onto the

surface of your smartphone OR onto the

protective film you installed in Step 2.

Central mounting locations work best to switch

between horizontal and vertical viewing angles,

but find a spot that suits your needs. When

ready, peel adhesive and stick plate to phone

case or apply directly to back of phone.

For thinner cases, simply place inside of the

case. To maximize the magnetism for thicker

cases, we recommend affixing to the outside

of your case.

Where should I affix the magnet plate?

Follow Tips:

First Time To Use Magnetic Mount? Secure Metal Plate Installation

Unscrew the screw-nut on the Mount Head

Place the screw-nut over the ball joint on the

Mount base.

Install Metal Plate on QI Cell Phones

Life-Time Warrenty!

IF YOU NEED ASSISTANCE OR REPLACEMENT PARTS

EMAIL US: [email protected]

WE WILL RESOLVE ALL ISSUES

IN YOUR FAVOR, EVEN YEARS

AFTER YOUR PURCHASE

Having Issues?

80MM

104.28MM

1

OQTIQ MagGripCD User manual

Brand: OQTIQ

Model: MagGripCD

Type: User manual

Related papers

Other documents