2. Whalen
  3. SPUS-BD-DC

Whalen SPUS-BD-DC User manual

  • Hello! I am an AI chatbot trained to assist you with the Whalen SPUS-BD-DC User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Baylor
Desk
Model # SPUS-BD-DC
For Parts Replacements and Inquiries, please call us Toll-Free 1-866-942-5362
To ensure a timely delivery, please include the following:
1. Full Name
2. Physical Address (Our primary carrier, FedEx, will NOT deliver to P.O. Boxes)
3. Phone Number
4. Model Number: SPUS-BD-DC
5. Part Number(s) or Letter(s)
6. Quantity
7. We also request that you please provide a brief description of the reason for your request.
SPUS-BD-DC--Page 1 of 15
DO NOT return to the store where it was purchased if parts are missing or damaged.
Our Customer Service Representatives will be available to assist you Monday - Friday 8:30 a.m. to 4:30 p.m.
Pacific Standard Time (Except Holidays).
021214
LOT NUMBER:
DATE PURCHASED: / /
SPUS-BD-DC--Page 2 of 15
3/16" x 22 x 8mm MACHINE SCREW
4 PCS
K
J
I
H
G
F
E
D
C
B
A
L
ALLEN WRENCH(4mm)
Dia. 8 x 30mm WOOD DOWEL
T-NUT
PLASTIC PEN CONTAINER
DRAWER HANDLE
1/4" x 70 x 12mm ALLEN BOLT
1/4" x 12 x 12mm ALLEN BOLT
LARGE CAM SCREW
LARGE CAM LOCK
SMALL CAM SCREW
SMALL CAM LOCK
8 PCS
2 PCS
10 PCS
10 PCS
16 PCS
16 PCS
4 PCS
4 PCS
1 PC
2 PCS
1 PC
M
GLUE 1 PC
N
1/4" x 25 x 12mm ALLEN BOLT 1 PC
4 PCS
O
1/4" x 60 x 12mm ALLEN BOLT
SPUS-BD-DC--Page 3 of 15
ZA
KEYBOARD GLIDE 4 SETS
16 PCS
ZB
ZC
ZD
3.5 x 12 x 6 mm WOOD SCREW
THE BELOW PARTS ARE PRE-ASSEMBLED AND ARE LISTED AS A REFERENCE ONLY.
1/4" x 12 x 10mm ALLEN BOLT
8 PCS
SPUS-BD-DC--Page 4 of 15
6
1
2
3
4
5
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
MIDDLE PANEL
DESK TOP PANEL
UPPER FRONT CROSSBAR
LOWER BACK CROSSBAR
RIGHT SIDE FRAME
LEFT SIDE FRAME
FRONT
FRONT
TOP
FRONT
FRONT
TOP
SPUS-BD-DC--Page 5 of 15
FRONT
TOP
TOP
FRONT
TOP
TOP
SPUS-BD-DC--Page 6 of 15
FRONT
1. Install (D) Large Cam Screws into the pre-installed threaded bushings on (2) Right Side Frame, (5) Desk Top
Panel, (6) Middle Panel and (7) Back Panel as shown. Fully tighten using a Phillips Head Screwdriver.
*NOTE: Make sure to install (D) Large Cam Screws into the holes with pre-installed plastic threaded
bushings.
2. Insert (H) Wood Dowels into the corresponding holes on (6) Middle Panel and (7) Back Panel as shown.
*NOTE: Apply a small amount of (M) Glue to the corresponding holes before placing (H) Wood Dowels
into position.
3. Install (E) Large Cam Locks into the corresponding holes on (6) Middle Panel, (7) Back Panel and (8) Bottom
Panel as shown. Refer to the Cam Lock/Dowel Placement Supplement below for additional help with Cam Lock
installation.
4. Install (F) Small Cam Screws into the corresponding holes on Panels 9 (x2), 11 (x2) and 12 (x2).
5. Lastly, install (G) Small Cam Locks into the corresponding holes on Panels 10 (x2), 11 (x2) and 12 (x2) as
shown. Refer to the Cam Lock/Dowel Placement Supplement below for additional help with Cam Lock installation.
SPUS-BD-DC--Page 7 of 15
FRONT
FRONT
E
E
E
E
F
F
F
F
TOP
TOP
FRONT
E
E
X 2
6
7
8
9
H
H
H
SPUS-BD-DC--Page 8 of 15
FRONT
FRO
NT
FRO
NT
G
G
G
G
X 2
X 2
X 2
10
11
12
SPUS-BD-DC--Page 9 of 15
TOP
FRONT
FRONT
12
10
11
13
11
12
9
11
12
(BACK VIEW)
10
10
SPUS-BD-DC--Page 10 of 15
TOP
6
FRONT
TOP
2
9
SPUS-BD-DC--Page 11 of 15
using (C) 3/16" x 22 x 8mm Machine Screw and a Phillips Head Screwdriver.
TOP
7
6
2
*NOTE: Apply a small amount of (M) Glue to the corresponding Wood Dowels in this step before securing
the assembly.
Install (7) Back Panel to (6) Middle Panel as shown and secure the 2 (Two) (E) Large Cam Locks using a Phillips
or Flat Head Screwdriver.
*NOTE: IT IS RECOMMENDED TO HAVE A SECOND PERSON ASSIST YOU DURING THIS ASSEMBLY
STEP.
1. Lay (5) Desk Top Panel down onto a non-abrasive surface and with the TOP of the panel facing
DOWNWARDS.
*NOTE: Apply a small amount of (M) Glue to the corresponding Wood Dowels in this step before securing
the assembly.
2. Next, using a second person to assist you, carefully lift the assembly (from Step 7) down into position on (5)
Desk Top Panel as shown. Secure the 4 (Four) (E) Large Cam Locks using a Phillips or Flat Head Screwdriver.
3. Lastly, secure (2) Right Side Frame assembly to (5) Desk Top Panel using (B) 1/4" x 12 x 12mm Allen Bolts
and (L) Allen Wrench as shown. DO NOT FULLY TIGHTEN ALLEN BOLTS UNTIL THE END OF STEP 9.
SPUS-BD-DC--Page 12 of 15
TOP
A
1
2
7
1. Finish securing (7) Back Panel to (2) Right Side Frame and (1) Left Side Frame using (I) T-Nuts and (A) 1/4"
x 70 x 12mm Allen Bolts as shown.
*NOTE: Refer to the T-Nut System Operation supplement above for additional information on (I) T-Nut
assembly.
2. Secure (1) Left Side Frame to (5) Desk Top Panel as shown, using (B) 1/4" x 12 x 12mm Allen Bolts and (L)
Allen Wrench.
3. Next, install (3) Lower Back Crossbar to (1) Left Side Frame and (2) Right Side Frame assembly as shown.
Secure using (O) 1/4" x 60 x 12mm Allen Bolts and (L) Allen Wrench.
4. Also install (4) Upper Front Crossbar to (1) Left Side Frame, (5) Desk Top Panel and (2) Right Side Frame
assembly as shown. Secure using (O) 1/4" x 60 x 12mm Allen Bolts, (N) 1/4" x 25 x 12mm Allen Bolt and (L)
Allen Wrench.
5. AT THIS TIME, FULLY TIGHTEN ALL ALLEN BOLTS FROM STEPS 8-9 USING (L) ALLEN WRENCH.
6. Using a second person to assist you, carefully turn the assembled unit UPRIGHT before proceeding to the
final step.
SPUS-BD-DC--Page 13 of 15
File Drawer Installation File Drawer Removal
Black Nylon Clip
Ball Bearing
Plate
Ball Bearing Plate
Black Nylon Clip
1. Install (J) Plastic Pen Container by slipping it into the hole on (5) Desk Top Panel as shown.
2. Lastly, install both drawer assemblies (from Step 5) using the File Drawer Installation/Removal Supplement
below.
SPUS-BD-DC--Page 14 of 15
YOUR ASSEMBLY SHOULD NOW BE COMPLETE!
4
4"
22"
30"
SPUS-BD-DC--Page 15 of 15
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an
inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently.
Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical
changes that may create spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we
recommend that you call a professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature
and humidity changes can cause fading, warping, shrinking and splitting of wood. It is
advised to keep furniture away from direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these
important and helpful tips will enhance your furniture as it ages.
We hope you enjoy your purchase for many years.
Thank you for your purchase.
QUALITY GUARANTEE
We are confident that you will be delighted with your purchase.
Should this product be defective in workmanship or materials or fail under normal use, we
will repair or replace it for up to one (1) year from date of purchase. Every our product is
designed to meet your highest expectations. We guarantee that you will immediately see
the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m. PST, Monday to Friday
/