2. Diebold Nixdorf
  3. iCash 15E

Diebold Nixdorf iCash 15E Operating instructions

  • Hello! I've reviewed the addenda to the Operating Manual for the Wincor Nixdorf iCASH 15E coin validator. This document includes updated procedures for module removal, sorting unit operation, new error codes, and cleaning guidance. I'm ready to answer your questions regarding these updates and the device's operation.
  • What does the error message E_DC mean?
    What should I do when the E_DC error message appears?
    How do I lower the sorting unit?
© Wincor Nixdorf International GmbH 2010
Order No / Bestellnummer: 01750208013
Addenda
Operating Manual iCASH 15E, Version 2
Page 8, point 3 („Release lever…. “): Not applicable.
Page 16, “Pulling out the coin module”, see new picture below:
Page 19, „Lowering sorting unit“: Green release lever is obsolete.
First section now reads: “Lower the sorting unit with the black handle
(2) in the direction of the arrow (3) as far as possible.”
Page 27, “Problems”: Additional Error Message E_DC
Message Meaning Remedy
E_DC: Wiper Error Coin Transport Error /
Transport Failure
- Remove all coins in
coin validator and
transport chain con-
veyor
- Remove foreign
objects
E_DB: Invalid Coin Double coins detected See above
Page 35, second section now reads: “For this purpose open the cover
of the coin validator to the right and keep it open while turning the
green wheel counter-clockwise (2) and removing coins (3).”
Page 41, „Cleaning, Service and Mainenance“: For cleaning
procedures refer to the new «Cleaning Instructions» (Nov 2010).
/