Trend TP60022 Installation guide

Trend
Brand
Trend
Model
TP60022
Type
Installation guide

Trend TP60022 is a versatile light fixture that can be installed as a pendant or semi-flush mount. Its adjustable stems allow for customization of the hanging height, making it suitable for various ceiling heights and room sizes. The fixture includes a canopy, swivel, lock nuts, stems, a mounting bar, box screws, hex nuts, a ground screw, and wire connectors for easy installation. Whether you prefer a modern pendant look or a sleek semi-flush design, this fixture offers a stylish lighting solution for your living space.

Trend TP60022 is a versatile light fixture that can be installed as a pendant or semi-flush mount. Its adjustable stems allow for customization of the hanging height, making it suitable for various ceiling heights and room sizes. The fixture includes a canopy, swivel, lock nuts, stems, a mounting bar, box screws, hex nuts, a ground screw, and wire connectors for easy installation. Whether you prefer a modern pendant look or a sleek semi-flush design, this fixture offers a stylish lighting solution for your living space.

TP60022 (Pendant Installation)
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustrations on the installation instructions.
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit
conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent
possible shock.
01. OUTLET BOX
02. WHITE WIRE
03. BLACK WIRE
04. GROUND WIRE
05. WIRE CONNECTORS
06. MOUNTING BAR
07. GROUND SCREW
08. CANOPY SCREWS
09. BOX SCREWS
10. HEX NUTS
11. LOCK NUTS
12. CANOPY
13. BALL NUT
14. SWIVEL
15. WASHER
16. STEM (L3’’)
17. STEM (L6’’)
18. STEM (L12’’)
19. LAMP BODY
ASSEMBLY AND INSTALLATION
1. Put swivel (14) through the center hole on canopy (12) and secure with lock nut (11).
2. Choose your desired length of stems (17)(18)(19), and then pass the power supply cord and
ground wire through stems (16) (17)(18), washer (15), swivel (14), canopy (12), and lock
nuts (11).
3. Connect stems (16) (17)(18) one by one, then attach lower end of stem (18) onto lamp body (19)
and upper end of stem (16) into swivel (14).
4. Thread canopy screws (08) into mounting bar(06) and secure with hex nuts (10).
5. Attach mounting bar (06) to outlet box (01) with box screws (09).
6. Make wire connection with white wire (02) and black wire (03). Use wire connectors (05) to
secure the connections. Secure ground wire (04) and ground wire from the fixture to
mounting bar (06) with ground screw (07).
7. Raise the canopy(12) over the outlet box(01) and secure with the ball nut(13).
INSTALLATION IS NOW COMPLETED
TP60022 (Semi Flush Installation)
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustrations on the installation instructions.
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit
conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent
possible shock.
01. OUTLET BOX
02. WHITE WIRE
03. BLACK WIRE
04. GROUND WIRE
05. WIRE CONNECTORS
06. MOUNTING BAR
07. GROUND SCREW
08. CANOPY SCREWS
09. BOX SCREWS
10. HEX NUTS
11. LOCK NUT
12. CANOPY
13. BALL NUT
14. WASHER
15. STEM
16. LAMP BODY
ASSEMBLY AND INSTALLATION
1. Pass the power supply cord and ground wire through stem (15), washer (14), canopy (12), and
lock nuts (11).
2. Attach lower end of stem (15) into lamp body (16) and upper end into canopy. Secure with lock
nut (11).
3. Thread canopy screws (08) into mounting bar(06) and secure with hex nuts (10).
4. Attach mounting bar (06) to outlet box (01) with box screws (09).
5. Make wire connection with white wire (02) and black wire (03). Use wire connectors (05) to
secure the connections. Secure ground wire (04) and ground wire from the fixture to
mounting bar (06) with ground screw (07).
6. Raise the canopy(12) over the outlet box(01) and secure with the ball nut(13).
INSTALLATION IS NOW COMPLETED
  • Page 1 1
  • Page 2 2

Trend TP60022 Installation guide

Trend
Brand
Trend
Model
TP60022
Type
Installation guide

Trend TP60022 is a versatile light fixture that can be installed as a pendant or semi-flush mount. Its adjustable stems allow for customization of the hanging height, making it suitable for various ceiling heights and room sizes. The fixture includes a canopy, swivel, lock nuts, stems, a mounting bar, box screws, hex nuts, a ground screw, and wire connectors for easy installation. Whether you prefer a modern pendant look or a sleek semi-flush design, this fixture offers a stylish lighting solution for your living space.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents