Revell 2867 User manual

Type
User manual
#
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85286710200), part number, description, your return address and phone number.
Visit our website: www.revell.com
KIT 2867 85286710200
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
Most cars and sport utility vehicles
do an admirable job of taking you most
anywhere the road leads you. However,
when the road ends, or never existed,
that doesn’t have to stop you provided
you’re in a Hummer
®
. It’s like a swiss
army knife with four wheels. The list of
features available on the H2 includes
climate control, power everything,
sunroof, heated leather seats front & rear
and a killer stereo with satellite radio, CD
changer and a subwoofer. Lost in the
wilderness or a suburban subdivision?
Don’t worry, you’ve got a DVD navigation
system. Your Special California wheels
Revell kit has superchargers, and
custom large diameter chrome wheels.
It’s the hottest vehicle on the streets and
now, on your shelf.
California Wheels
Hummer
®
H2
DECAL PLACEMENT
11
This optional paint guide is provided if you
choose to detail paint your model.
Ce guide de peintures vous sera fourni si vous choisissez de
peindre votre modèle en détail.
Aluminum
Burnt Iron
Dark Gray
Flat Black
Flat White
Gloss Black
Gloss White
Light Gray
Semigloss Black
Steel
Transparent Red
Turn Signal Amber
Aluminium
Fer brûlé
Gris foncé
Noir mat
Blanc mat
Noir brillant
Blanc brillant
Gris clair
Noir satiné
Acier
Rouge transparent
Feu clignotant de direction ambre
Paint Details SEMIGLOSS BLACK
as shown in Placment Guide below
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (H) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before cementing
in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with setting
solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (H) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* rifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec les
solutions de fixage ou les solvants.
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
* REPEAT PROCEDURE
* REPETEZ LE PROCEDE
`` ` ` ` `
Kit 2867 - Page 8
BODY ASSEMBLY
9
SUSPENSION ASSEMBLY
1
FINAL ASSEMBLY
10
B
A
42
ExHAUST
STEEL
3
CHASSIS
FLAT BLACK
8
FRONT AxLE - CUSTOM
FLAT BLACK
7
REAR AxLE - CUSTOM
FLAT BLACK
SCREWS
4
LOWER SUSPENSION
ASSEMBLY
FLAT BLACK
43
LEFT FRONT DISC BRAKE
ALUMINUM
44
LEFT REAR DISC BRAKE
ALUMINUM
47
RIGHT FRONT DISC BRAKE
ALUMINUM
48
RIGHT REAR DISC BRAKE
ALUMINUM
SUSPENSION AND DISC ASSEMBLY
2
B
A
SCREWS
9
REAR STABILIzER BAR
GLOSS BLACK
H58
LEFT STEP-UP BAR
CHROME
(REPEAT FOR OTHER SIDE
USING PART
#59)
10
FRONT BUMPER
SEMIGLOSS BLACK
57
FOG LIGHT
CLEAR
66
HEADLIGHT
CLEAR
52
GRILLE
GLOSS WHITE
67
TURN LIGHT
CLEAR
12
HOOD GRILLE
SEMIGLOSS BLACK
67
TURN LIGHT
CLEAR
H51
WHEEL - CUSTOM
CHROME
TIRE
METAL AxLE
METAL AxLE
SCREWS
BURNT
IRON
BURNT
IRON
BURNT
IRON
BURNT
IRON
TURN SIGNAL
AMBER
TURN SIGNAL
AMBER
Kit 2867 - Page 7Kit 2867 - Page 2
REAR BODY ASSEMBLY
7
TOP BODY ASSEMBLY
8
INTERIOR ASSEMBLY
3
A
B
11
REAR BUMPER
SEMIGLOSS BLACK
62
REAR WINDOW
CLEAR
FLAT BLACK
(PAINT FROM BEHIND)
65
RIGHT TAILLIGHT
CLEAR
64
LEFT TAILLIGHT
CLEAR
72
RIGHT REAR
LOUVERED PANEL
SEMIGLOSS BLACK
71
LEFT REAR
LOUVERED PANEL
SEMIGLOSS BLACK
19
GAS CAP
SEMIGLOSS BLACK
14
WIPER
SEMIGLOSS BLACK
18
ROOF RACK
SEMIGLOSS BLACK
18
ROOF RACK
SEMIGLOSS BLACK
15
LEFT DOOR HANDLE
SEMIGLOSS BLACK
PAINT HANDEL SILVER
(REPEAT FOR OTHER SIDE)
70
MIRROR FACE
(REPEAT FOR OTHER SIDE )
16
LEFT MIRROR HOUSING
SEMIGLOSS BLACK
(REPEAT FOR OTHER SIDE
USING PARTS
#17 & #70)
13
HOOD PIN
SEMIGLOSS BLACK
(REPEAT FOR OTHER SIDE)
H54
SHIFTER
CHROME
H55
SHIFTER BASE
CHROME
26
CONSOLE
LIGHT GRAY
25
INTERIOR FLOOR
41
SPEAKERS
GLOSS WHITE
H56
AMPLIFIER
CHROME
32
REAR SEAT BACK
DARK GRAY
29
LEFT FRONT SEAT
DARK GRAY
30
LEFT FRONT SEAT BACK
DARK GRAY
45
RIGHT FRONT SEAT
DARK GRAY
46
RIGHT FRONT SEAT BACK
DARK GRAY
31
REAR SEAT
DARK GRAY
82
LEFT MIRROR BASE
SEMIGLOSS BLACK
(REPEAT FOR OTHER SIDE
USING PART
#81)
*OUVERTURE DE COUPURE
* CUT OFF
FRONT OF
SPEAKER CABINET
TRANSPARENT RED
(CENTERS OF SPEARERS)
PAINT SHADED AREA
LIGHT GRAY
PAINT SHADED AREA
LIGHT GRAY
PAINT SHADED AREA
LIGHT GRAY
PAINT SHADED AREA
SEMIGLOSS BLACK
SEMIGLOSS BLACK
TRANSPARENT RED
FLAT BLACK
SEMIGLOSS BLACK
TRANSPARENT RED
TURN SIGNAL AMBER
GLOSS WHITE
SEMIGLOSS BLACK
TRANSPARENT RED
TURN SIGNAL AMBER
GLOSS WHITE
SEMIGLOSS BLACK
10
SEMIGLOSS BLACK
PAINT SHADED AREA
DARK GRAY
Kit 2867 - Page 3Kit 2867 - Page 6
INTERIOR ASSEMBLY
3
WINDSHIELD AND WINDOWS ASSEMBLY
5
INTERIOR AND CHASSIS ASSEMBLY
4
BODY AND CHASSIS ASSEMBLY
6
35
STEERING WHEEL
DARK GRAY
(PAINT SHADED AREA
FLAT WHITE)
34
STEERING COLUMN
LIGHT GRAY
(PAINT SHADED AREA
FLAT BLACK)
63
INSTRUMENT GIASS
CLEAR
(APPLE DECAL TO BACK
SIDE OF CLEAR)
33
DASH
DARK GRAY
COMPLETED CHASSIS
ASSEMBLY
H53
REAR VIEW MIRROR
CHROME
COMPLETED INTERIOR
ASSEMBLY
60
WINDSHIELD
CLEAR
FLAT BLACK
(PAINT FROM INSIDE)
73
RIGHT FRONT SIDE WINDOW
CLEAR
FLAT BLACK
(PAINT FROM INSIDE)
74
RIGHT REAR SIDE WINDOW
CLEAR
FLAT BLACK
(PAINT FROM INSIDE)
REPEART FOR OTHER SIDE
USING PARTS 68 & 69
36
REAR HATCH INTERIOR
LIGHT GRAY
2
REAR HATCH
GLOSS WHITE
COMPLETED DASH
ASSEMBLY
COMPLETED CHASSIS
ASSEMBLY
COMPLETED BODY
ASSEMBLY
C
27
LEFT INTERIOR SIDE
28
RIGHT INTERIOR SIDE
DARK GRAY
(REPEAT FOR
OTHER SIDE)
FLAT BLACK
(REPEAT FOR OTHER SIDE)
SILVER
(REPEAT FOR OTHER SIDE)
FLAT BLACK
PAINT SHADED AREA
SILVER
PAINT SHADED AREA
TRANSPARANT RED
PAINT SHADED AREA
TRANSPARANT RED
LIGHT GRAY
(REPEAT FOR OTHER SIDE)
DECAL 11
Kit 2867 - Page 5Kit 2867 - Page 4
INTERIOR ASSEMBLY
3
WINDSHIELD AND WINDOWS ASSEMBLY
5
INTERIOR AND CHASSIS ASSEMBLY
4
BODY AND CHASSIS ASSEMBLY
6
35
STEERING WHEEL
DARK GRAY
(PAINT SHADED AREA
FLAT WHITE)
34
STEERING COLUMN
LIGHT GRAY
(PAINT SHADED AREA
FLAT BLACK)
63
INSTRUMENT GIASS
CLEAR
(APPLE DECAL TO BACK
SIDE OF CLEAR)
33
DASH
DARK GRAY
COMPLETED CHASSIS
ASSEMBLY
H53
REAR VIEW MIRROR
CHROME
COMPLETED INTERIOR
ASSEMBLY
60
WINDSHIELD
CLEAR
FLAT BLACK
(PAINT FROM INSIDE)
73
RIGHT FRONT SIDE WINDOW
CLEAR
FLAT BLACK
(PAINT FROM INSIDE)
74
RIGHT REAR SIDE WINDOW
CLEAR
FLAT BLACK
(PAINT FROM INSIDE)
REPEART FOR OTHER SIDE
USING PARTS 68 & 69
36
REAR HATCH INTERIOR
LIGHT GRAY
2
REAR HATCH
GLOSS WHITE
COMPLETED DASH
ASSEMBLY
COMPLETED CHASSIS
ASSEMBLY
COMPLETED BODY
ASSEMBLY
C
27
LEFT INTERIOR SIDE
28
RIGHT INTERIOR SIDE
DARK GRAY
(REPEAT FOR
OTHER SIDE)
FLAT BLACK
(REPEAT FOR OTHER SIDE)
SILVER
(REPEAT FOR OTHER SIDE)
FLAT BLACK
PAINT SHADED AREA
SILVER
PAINT SHADED AREA
TRANSPARANT RED
PAINT SHADED AREA
TRANSPARANT RED
LIGHT GRAY
(REPEAT FOR OTHER SIDE)
DECAL 11
Kit 2867 - Page 5Kit 2867 - Page 4
REAR BODY ASSEMBLY
7
TOP BODY ASSEMBLY
8
INTERIOR ASSEMBLY
3
A
B
11
REAR BUMPER
SEMIGLOSS BLACK
62
REAR WINDOW
CLEAR
FLAT BLACK
(PAINT FROM BEHIND)
65
RIGHT TAILLIGHT
CLEAR
64
LEFT TAILLIGHT
CLEAR
72
RIGHT REAR
LOUVERED PANEL
SEMIGLOSS BLACK
71
LEFT REAR
LOUVERED PANEL
SEMIGLOSS BLACK
19
GAS CAP
SEMIGLOSS BLACK
14
WIPER
SEMIGLOSS BLACK
18
ROOF RACK
SEMIGLOSS BLACK
18
ROOF RACK
SEMIGLOSS BLACK
15
LEFT DOOR HANDLE
SEMIGLOSS BLACK
PAINT HANDEL SILVER
(REPEAT FOR OTHER SIDE)
70
MIRROR FACE
(REPEAT FOR OTHER SIDE )
16
LEFT MIRROR HOUSING
SEMIGLOSS BLACK
(REPEAT FOR OTHER SIDE
USING PARTS
#17 & #70)
13
HOOD PIN
SEMIGLOSS BLACK
(REPEAT FOR OTHER SIDE)
H54
SHIFTER
CHROME
H55
SHIFTER BASE
CHROME
26
CONSOLE
LIGHT GRAY
25
INTERIOR FLOOR
41
SPEAKERS
GLOSS WHITE
H56
AMPLIFIER
CHROME
32
REAR SEAT BACK
DARK GRAY
29
LEFT FRONT SEAT
DARK GRAY
30
LEFT FRONT SEAT BACK
DARK GRAY
45
RIGHT FRONT SEAT
DARK GRAY
46
RIGHT FRONT SEAT BACK
DARK GRAY
31
REAR SEAT
DARK GRAY
82
LEFT MIRROR BASE
SEMIGLOSS BLACK
(REPEAT FOR OTHER SIDE
USING PART
#81)
*OUVERTURE DE COUPURE
* CUT OFF
FRONT OF
SPEAKER CABINET
TRANSPARENT RED
(CENTERS OF SPEARERS)
PAINT SHADED AREA
LIGHT GRAY
PAINT SHADED AREA
LIGHT GRAY
PAINT SHADED AREA
LIGHT GRAY
PAINT SHADED AREA
SEMIGLOSS BLACK
SEMIGLOSS BLACK
TRANSPARENT RED
FLAT BLACK
SEMIGLOSS BLACK
TRANSPARENT RED
TURN SIGNAL AMBER
GLOSS WHITE
SEMIGLOSS BLACK
TRANSPARENT RED
TURN SIGNAL AMBER
GLOSS WHITE
SEMIGLOSS BLACK
10
SEMIGLOSS BLACK
PAINT SHADED AREA
DARK GRAY
Kit 2867 - Page 3Kit 2867 - Page 6
BODY ASSEMBLY
9
SUSPENSION ASSEMBLY
1
FINAL ASSEMBLY
10
B
A
42
ExHAUST
STEEL
3
CHASSIS
FLAT BLACK
8
FRONT AxLE - CUSTOM
FLAT BLACK
7
REAR AxLE - CUSTOM
FLAT BLACK
SCREWS
4
LOWER SUSPENSION
ASSEMBLY
FLAT BLACK
43
LEFT FRONT DISC BRAKE
ALUMINUM
44
LEFT REAR DISC BRAKE
ALUMINUM
47
RIGHT FRONT DISC BRAKE
ALUMINUM
48
RIGHT REAR DISC BRAKE
ALUMINUM
SUSPENSION AND DISC ASSEMBLY
2
B
A
SCREWS
9
REAR STABILIzER BAR
GLOSS BLACK
H58
LEFT STEP-UP BAR
CHROME
(REPEAT FOR OTHER SIDE
USING PART
#59)
10
FRONT BUMPER
SEMIGLOSS BLACK
57
FOG LIGHT
CLEAR
66
HEADLIGHT
CLEAR
52
GRILLE
GLOSS WHITE
67
TURN LIGHT
CLEAR
12
HOOD GRILLE
SEMIGLOSS BLACK
67
TURN LIGHT
CLEAR
H51
WHEEL - CUSTOM
CHROME
TIRE
METAL AxLE
METAL AxLE
SCREWS
BURNT
IRON
BURNT
IRON
BURNT
IRON
BURNT
IRON
TURN SIGNAL
AMBER
TURN SIGNAL
AMBER
Kit 2867 - Page 7Kit 2867 - Page 2
#
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85286710200), part number, description, your return address and phone number.
Visit our website: www.revell.com
KIT 2867 85286710200
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
Most cars and sport utility vehicles
do an admirable job of taking you most
anywhere the road leads you. However,
when the road ends, or never existed,
that doesn’t have to stop you provided
you’re in a Hummer
®
. It’s like a swiss
army knife with four wheels. The list of
features available on the H2 includes
climate control, power everything,
sunroof, heated leather seats front & rear
and a killer stereo with satellite radio, CD
changer and a subwoofer. Lost in the
wilderness or a suburban subdivision?
Don’t worry, you’ve got a DVD navigation
system. Your Special California wheels
Revell kit has superchargers, and
custom large diameter chrome wheels.
It’s the hottest vehicle on the streets and
now, on your shelf.
California Wheels
Hummer
®
H2
DECAL PLACEMENT
11
This optional paint guide is provided if you
choose to detail paint your model.
Ce guide de peintures vous sera fourni si vous choisissez de
peindre votre modèle en détail.
Aluminum
Burnt Iron
Dark Gray
Flat Black
Flat White
Gloss Black
Gloss White
Light Gray
Semigloss Black
Steel
Transparent Red
Turn Signal Amber
Aluminium
Fer brûlé
Gris foncé
Noir mat
Blanc mat
Noir brillant
Blanc brillant
Gris clair
Noir satiné
Acier
Rouge transparent
Feu clignotant de direction ambre
Paint Details SEMIGLOSS BLACK
as shown in Placment Guide below
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (H) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before cementing
in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with setting
solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (H) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* rifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec les
solutions de fixage ou les solvants.
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
* REPEAT PROCEDURE
* REPETEZ LE PROCEDE
`` ` ` ` `
Kit 2867 - Page 8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Revell 2867 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages